All of the designs try to achive the same thing: catch and lock itself so the guy trying to pick can't decide if he got it or nah. Mushroom pins catch when you push them too much, serrated pins catch if you move then around too much while pushing etc. EDIT:T pins catch when you are trying to push them up and rotated the cylinder too much
Normally I dislike reading comments, but this community is fascinating. A large chunk of people, myself included, are amazed by his skill, and also enjoy his very straight forward narration. And another large group are professions and hobbyists who have technical questions or requests for videos expanding on various lock mechanics. It's really cool.
@@lockpickinglawyer maybe one could put something like one of those sample credit cards they put in new wallets next to your locks so your viewers can instantly recognize how big or small it is.
filing account Well, I try to keep them short, but I also make a habit of disassembling anything that can be non-destructively taken down... that’s always going to take a little longer.
@@scottpreston5074 That only works if it isn't locked. If it's closed, any force would be applied to the ball bearings, so you can't get it open if if you just removed that screw
I couldn't pick a simple lock. I have no interest in locks but I find your channel amazing! There is something deeply satisfying about your videos. It autoplayed the whole way through the other night and every video I just kept saying "one more", "oh this looks interesting, I'll go to sleep after this lock". I was up till 8am! Love it haha.
Its not rocket science to pick locks legally as hobby when get hang of it. Once got the hang of how different locks work. Everything becomes easier to pick
My favorite thing about this channel is that LPL uploads very frequently, and his usually-short videos mean I don't have to worry about finding free time to watch them-- I can watch as soon as I get the notification. Outstanding work as always LPL
That is funny, that is me also. I had always wanted to get into it. I had heard from another person that the picking of locks would destroy it. So I never did. Then started to watch LPL and found out how non destructive it is. He is a really good teacher.....
@@pagedeveloper You must still be careful and follow the rule of thumb, never pick a lock that is in use or that you rely upon. It can cause mechanisms to malfunction in unexpected ways, sometimes.
I keep watching these videos hoping to one day find a lock that doesn't just fall apart when you glance at it from across the room, so that I know what decent lock to buy when I need one. You make picking these things look way too easy.
That exposed screw seems like a rather massive design oversight, but, when locked, the shackle is still held in by the locking mechanism. I do like the ability to use literally any euro profile lock.
Great video as always, lots of information. I'd like to see you rebuild a lock that you have gutted, I'm assuming you do put them back together, I get the impression that it's a lot more tricky than taking them apart.
@@shawnheidingsfelder8179 if they're hardened it would make drilling more of a pain, they can dull or chip a drill bit, and could also make it skate off course
(Hardened) Steel is more drill/tool-resistant than brass is... hence the employment of hardened steel pins & anti-drill inserts to thwart or frustrate attempts at destructive forcible entry attacks by drilling out the cylinder & it's guts, thus exposing the securing mechanism that could then be manipulated with a common-point or slotted screwdriver. A vast majority of higher-end higher-security lock designs employ this security feature to effectively make their end-product more secure against physical attack.
Thank you for all your content. I picked my first lock today. I bought one of the lock pick sets from Banggood you reviewed. This one came with the acrylic padlock which probably opens if you glare at it too hard but with bottom of the key way tension and a hook of unknown size I was able to get it open. And I'm able to get it open reliably now without looking at the mechanism. Thanks again. I would have never thought about lock picking without your videos.
hey LPL, I have an idea: see if you can get a suction-cup microphone and attach it to locks as you pick them. metal carries sound very well, so maybe you could discover even faster picking methods. Audio feedback may allow you to distinguish binding pins from false sets, etc. Plus if you amplify and mix the audio well, it should come through in the video for all of your viewers.
Your videos inspired me to take up locksport. Unfortunately, this happened right before I left for study abroad, so it was a decision I was unable to act on. However, my kit is already waiting for me (Sparrows Tuxedo Night School, because my stepmother went way overboard) and I've got three weeks until I can start practicing. I cannot wait to get into this. I'm a naturally fidgety person, so having something so precise to do with my hands should help me a lot with focusing, as well as just being fun.
And like he said, get a high security core and you'll make this lock difficult to pick even for the likes of LPL. No telling that the Ramset won't crack it though.
@@ACogloc yes true, I have some 30/10 euro's to fit, ones a Pfaffenhain, should do nicely. I don't think the Ramset will get in and I don't think he'll try either. Lol
@@two_tier_gary_rumain hehe yeah . I'm always on eBay. Seen these ages ago but they were too darn expensive. I don't have the same spending budget like before though. :/
I put an E60 in my garage door, blimey Harry made it look easy to pick. Took me a few attempts, the warding is rather awkward. Although truth be told the Lock Picking Lawyer is *somewhat* more skilled than I am. I actually used a top of keyway prybar and one of the Sparrows SSDEV hooks in 15 thou.
@@WhiteHatMatt it refers to when the profile of the key way does not form a straight line from top to bottom, through the centre of the lock (which makes picking the lock harder because you have less space to work with) i have a lock for example which i am unable to pick to this day, because the paracentric key way, combined with extremely tight tolerances, makes it so tight that i can't even get my smallest pick in there, i can reach the first pin and that's it.
Apparently, the best way into a container is to bribe the stacker to put a container with a trapdoor base, to which you already have access - on top of the target container. Then all (ALL) you need to do is cut through the roof of the target container and help yourself to the contents. This is best done in a quiet corner of the docks or at sea. You only get to do it once ;))
Makes a lock body that's harder to twist break. Leaves one of the most commonly used screws completely exposed, which can be removed without unlocking the core, holding the shackle in.
A nice beefy lock. Love the rotating body. I think the core being threaded would have made that lock a much more difficult pick. LPL made that look so easy when in fact security pins and devilish warding are fighting you all the way. Great picking LPL
I'm not sure I get this, with the lock closed you use the Allen screw to remove the shackle and the whole lock came apart, why father to pick the lock?
Not really, since the Allen screw in the side is only there to keep the shackle in while the lock is open. When it's locked, the locking lugs hold it on both sides.
Aww I was kinda hoping you'd disassemble the lock body properly. With the core being so readily switchable, I didn't honestly see the value in crackin' it open - the interesting thing about this lock for sure seemed like the spin-a-muh-thing.
Very interesting lock-concept! What I particularly like about it, is the fact, that one could use any standard euro-core inside! Speaking of which - dear lockpicking lawyer - which core would you consider the go-to best choice for pick-proofing your house and garden-shed? I want to have the same key for house-door, shed-door and garage. So I would need a very secure and preferrably non-pickable core. I thought of the EVVA 3KS for a while but to my surprise it has been picked several times on RUclips already. Please up-vote so he sees this comment, since I think his suggestion of a very secure and hard to Pick core might be in the interest of more people then just me.
some of these locks are so beefy I expect to see a cowboy trying to herd them. Though if I had a shipping container full of flat screens id spend the bucks to get the best and beefyist.
I am amazed how quick you can get into locks, obviously though if this was on a shipping container it would be a lot more awkward to pick open, by that time a thief would be caught.
I'm watching your videos because I'm researching the best security to protect my "pressious bullions" and from your videos I understand that locks or safes don't work atoll, possibly the best "SAFE" is outside and away from your home, bury your stuff in a barn or somewhere that will be almost impossible for a thief to find
Damn thing looks like an inverted beer can in your hand while picking... pretty imposing from the outside. If you don't have anything to secure with it, I imagine it would provide a hell of a thump upside a trespasser's head!
@@Hunter_Bidens_Crackpipe_ That's the same thing as saying "just do what an artist does" if you want to be able to paint the same picture as them. It is a skill that requires development. Either way, he wasn't bragging and saying that anyone who was experienced could pick that lock that was in it. He also mentioned that the core of the lock could be replaced with one of way higher security if you so chose.
"Just do the same thing he does and it's easy." You're absolutely correct! However, you're leaving out the part that says 'being able to do the EXACT same thing he does takes a very long time and a lot of hard work." I'm thinking that's probably important. C'mon man.
@@Hunter_Bidens_Crackpipe_ Dude LPL brings locks to the cinema to train during commercials he isn't full of himself he is accuratly reporting on the fact that he has experience picking locks. Don't be jealous because you have no skills in life.
Ive got a few of these Many moons ago,the first one I ever got had a bog standard 5 pin front door key type I kid you not!!! I upgraded to an Assa Twin combi core.
"This is the LockPickingLawyer and I'm here at the docks with Bosnian Bill and our generic henchmen. We've identified these high value shipping containers by their use of the RotaLok I've previously featured. Today we will be profiting right after a click out of two, nothing on three, four is binding, small click out of five, nothing on six... back to one... and it seems we have the shipping container opened. Looks like there are several cases of high priced whiskey, some beer, and oooohhh someone is shipping their Lamborghini! Guess I'm riding home in style. That's all I have for you today. And remember, everyone wear your masks and stay safe out there."
I would love to see a lock where the core itself freely rotates so that it cant be tensioned and when the key is inserted it binds with the outer layer in some way to actuate the locking mechanism
@@AntaresSQ01 so? An idea is still an idea. And I really like your idea, LPL could probably still pick it, but it would be cool to see an actual device like that.
@@moviemaker2011z How does one patent an idea and does it cost anything? haha this is more of a challenge lock idea i'm thinking of rather than a production lock, i'm sure a messed up warding will provide the same results
@@AntaresSQ01 you know, I dont actually know how one would go about making a patent, my assumption is that you would have to find a firm of some sort that would assist with filing for the products patent number but I dont know the essentials. Edit: just looked it up, the idea would have to first be created and you must keep careful notes about every step of the process making it. Be sure it qualifies for patent protection, assess the commercial potential of said product, be sure to make sure your product isnt already on the market or awaiting patent approval, prepare and file with the USPTO where you can get a regular patent application RPA or a provisional patent application PPA. And yes it does cost to file. But hey, I guess it would still be an amazing challenge lock if you found some way to make it, such as 3d printing or computer generated. Hopefully someone sees your idea and will make it for LPL.
I have resisted saying it for a while now but dammit, you sound like my old Dentist Mr Simms who I visited as a kid. You even have the same tone, that cold quiet confidence of getting the job done. Its eerie. 😑🙃
You have some excellent content in here. Can you please make a video on the best locks available in the range of 15-50 Dollars? Would really appreciate if you do so. Thanks.
Interesting key pins. DOM uses them for decades, so ABUS finaly uses them too. I wonder a bit about the ABUS core, it's a snapped euro cylinder like made by an amateur :)
I would request a further explanation of the various pin designs and their intended purposes. Thanks as always.
I too would like to know what the purpose of the different pins does.
All of the designs try to achive the same thing: catch and lock itself so the guy trying to pick can't decide if he got it or nah. Mushroom pins catch when you push them too much, serrated pins catch if you move then around too much while pushing etc.
EDIT:T pins catch when you are trying to push them up and rotated the cylinder too much
I guess most viewers know and we are left out. We could however, research the thing; but what best than to get the info directly from the LPL himself.
lockwiki.com/index.php/Security_pin
Agreed. I'd love a few videos where he educates. Maybe the differences between picks, etc.
Normally I dislike reading comments, but this community is fascinating. A large chunk of people, myself included, are amazed by his skill, and also enjoy his very straight forward narration. And another large group are professions and hobbyists who have technical questions or requests for videos expanding on various lock mechanics. It's really cool.
Nice to find a community that isn't toxic, right?
@@cameronjadewallace Just wanted to say nice pfp :3
@@Roxxofoxxo thanks, it's my Furcadia avatar that I edited
@@cameronjadewallace Yeah! It's np!
Excellent lock for the Transportation industry
the ability to swap out cores is a bonus great picking as always.
"Very tricky to open" high praise from LPL
Love that no matter what lock he is up against, his voice never wavers with ANY sign of stress .🇺🇸
I never realized how big that lock was until you gripped it. Big Boi Lock.
Alonna Frazier I was thinking that as I was shooting the thumbnail. Pictures of the lock alone don’t do it justice.
@@lockpickinglawyer maybe one could put something like one of those sample credit cards they put in new wallets next to your locks so your viewers can instantly recognize how big or small it is.
8 minute video. That's like a feature film for TLPL!
Thats what I was thinking as well!
Extended version.
I dont know who tlpl is
@@cookiemonster-ky9ru That's strange. We did. It's not rocket surgery to figure out.
filing account Well, I try to keep them short, but I also make a habit of disassembling anything that can be non-destructively taken down... that’s always going to take a little longer.
> This lock is used by military and high value cargo
> Picks lock in 1 minute
wtf mate
I think it was less than that 😂😂
You haven't seen his other videos yet I guess :-)
If my eyes didn't deceive me, I think he took the shackle out with an Allen wrench.!!!!?
Because he is an expert lock picker?
@@scottpreston5074 That only works if it isn't locked. If it's closed, any force would be applied to the ball bearings, so you can't get it open if if you just removed that screw
I couldn't pick a simple lock. I have no interest in locks but I find your channel amazing! There is something deeply satisfying about your videos. It autoplayed the whole way through the other night and every video I just kept saying "one more", "oh this looks interesting, I'll go to sleep after this lock". I was up till 8am! Love it haha.
Dude, you are the lockpicking master. Seriously. WOW.
" here's all the security pins , let me just pick this shit in 10 seconds flat " haha , always
Its not rocket science to pick locks legally as hobby when get hang of it. Once got the hang of how different locks work. Everything becomes easier to pick
My favorite thing about this channel is that LPL uploads very frequently, and his usually-short videos mean I don't have to worry about finding free time to watch them-- I can watch as soon as I get the notification. Outstanding work as always LPL
I'm loving your content, I started lockpicking thanks to you (I wanted to do so for a long time but needed a great teacher ^^)
I didn't want, but start to learn, because these videos look so satisfying for some reason
@@x0r1k Yes it is :)
That is funny, that is me also. I had always wanted to get into it. I had heard from another person that the picking of locks would destroy it. So I never did. Then started to watch LPL and found out how non destructive it is. He is a really good teacher.....
@@pagedeveloper You must still be careful and follow the rule of thumb, never pick a lock that is in use or that you rely upon. It can cause mechanisms to malfunction in unexpected ways, sometimes.
I keep watching these videos hoping to one day find a lock that doesn't just fall apart when you glance at it from across the room, so that I know what decent lock to buy when I need one. You make picking these things look way too easy.
My first thought when I saw the length of the video was " FFS , lpl and BB have been drinking again " haha
That exposed screw seems like a rather massive design oversight, but, when locked, the shackle is still held in by the locking mechanism. I do like the ability to use literally any euro profile lock.
Sure looks that way doesn't it?! I would replace the core and then squirt a few drops of crazy glue and a small ball bearing over the screw.
Great video as always, lots of information.
I'd like to see you rebuild a lock that you have gutted, I'm assuming you do put them back together, I get the impression that it's a lot more tricky than taking them apart.
Tom Simpson not tricky at all... I’ve shown a few before. But I’ll consider mixing more in. 👍
In an old job I had to break through hundreds of container locks-------this was one of the better smaller ones
A video about pin types and how does it prevent/make harder different attacks
Yes. I'm not really sure why having two steel pins and the rest brass makes a difference.
@@shawnheidingsfelder8179 if they're hardened it would make drilling more of a pain, they can dull or chip a drill bit, and could also make it skate off course
The chatter between the different types of materials will bust drill bits being spun too fast.
(Hardened) Steel is more drill/tool-resistant than brass is... hence the employment of hardened steel pins & anti-drill inserts to thwart or frustrate attempts at destructive forcible entry attacks by drilling out the cylinder & it's guts, thus exposing the securing mechanism that could then be manipulated with a common-point or slotted screwdriver.
A vast majority of higher-end higher-security lock designs employ this security feature to effectively make their end-product more secure against physical attack.
ruclips.net/video/NI4JeCvS2u0/видео.html
Thank you for all your content. I picked my first lock today. I bought one of the lock pick sets from Banggood you reviewed. This one came with the acrylic padlock which probably opens if you glare at it too hard but with bottom of the key way tension and a hook of unknown size I was able to get it open. And I'm able to get it open reliably now without looking at the mechanism. Thanks again. I would have never thought about lock picking without your videos.
hey LPL, I have an idea: see if you can get a suction-cup microphone and attach it to locks as you pick them. metal carries sound very well, so maybe you could discover even faster picking methods. Audio feedback may allow you to distinguish binding pins from false sets, etc. Plus if you amplify and mix the audio well, it should come through in the video for all of your viewers.
With that Halloween style font on his pinning tray, it's like the grave of many locks!
Great video. I really like videos like this where you take a lock apart and show what's inside.
Your videos inspired me to take up locksport. Unfortunately, this happened right before I left for study abroad, so it was a decision I was unable to act on.
However, my kit is already waiting for me (Sparrows Tuxedo Night School, because my stepmother went way overboard) and I've got three weeks until I can start practicing. I cannot wait to get into this. I'm a naturally fidgety person, so having something so precise to do with my hands should help me a lot with focusing, as well as just being fun.
That's also why I started picking locks... It's the sort of thing you can practice while working on something else at the same time :)))
I hope you have fun with it , don't get put off if you don't succeed straight away , practice makes perfect
No comb pick will work in that lock with those super long pins!!! That’s a great lock!!! Great pick and gut LPL!!
It wouldn't fit the keyway anyway.
Ahh, what a beauty, I dream of the day I can have one of these in my collection..
Just make sure that you keep your lock collection safe and secure behind a lock ;)
@@VulpesVulpes42 And then lock that lock.
I always enjoy your videos LPL, thank you for making them
😍 Love them both but super expensive. Surprisingly super fast to pick... for you. I still should buy it, not many pick like you.👍🏻😎
And like he said, get a high security core and you'll make this lock difficult to pick even for the likes of LPL. No telling that the Ramset won't crack it though.
@@ACogloc yes true, I have some 30/10 euro's to fit, ones a Pfaffenhain, should do nicely. I don't think the Ramset will get in and I don't think he'll try either. Lol
Off to eBay again, Don?
@@ACogloc It only took LPL a minute with all the security pins.
@@two_tier_gary_rumain hehe yeah . I'm always on eBay. Seen these ages ago but they were too darn expensive. I don't have the same spending budget like before though. :/
these are just so rough tough and chunky looking , gotta love them.
I think that's a lock that'd actually survive the Ramset. Might not spin so well after though.
LPL should try this
Those lower pins look like bombs that would be dropped from a plane.
a airfix plane ?
If it were up to me, they'd be called torpedo pins
Aesthetically pleasing cylindrical design
Your metal tray looks so much better than these cheap plastic trays.
I'd love one of these! Just got another grail the 10 lever Ingersoll
The quality of this lock is amazing
I don’t know anything about locks but this is satisfying
Lock: **exists**
LPL: I'm about to end this man's whole career.
I would love to watch you put these locks back together!
can you do a video drilling out some cores, with and with out anti drill pins?
what would you need a video of that for? get some carbide drill bits, and have a ball.
It's really interesting to watch these new videos after binging on your old videos and seeing the improvement of skill since then.
Very interesting lock expert picking as usual.
I put an E60 in my garage door, blimey Harry made it look easy to pick. Took me a few attempts, the warding is rather awkward.
Although truth be told the Lock Picking Lawyer is *somewhat* more skilled than I am. I actually used a top of keyway prybar and one of the Sparrows SSDEV hooks in 15 thou.
Informative and concise. Thank you!
"Paracentric". I enjoy my new lexicon. Thank you.
Jay Mudie yeah but what does it mean?
@@WhiteHatMatt
it refers to when the profile of the key way does not form a straight line from top to bottom, through the centre of the lock (which makes picking the lock harder because you have less space to work with)
i have a lock for example which i am unable to pick to this day, because the paracentric key way, combined with extremely tight tolerances, makes it so tight that i can't even get my smallest pick in there, i can reach the first pin and that's it.
Apparently, the best way into a container is to bribe the stacker to put a container with a trapdoor base, to which you already have access - on top of the target container. Then all (ALL) you need to do is cut through the roof of the target container and help yourself to the contents. This is best done in a quiet corner of the docks or at sea. You only get to do it once ;))
Beautiful lock. Very cool pinning. But of course you spanked it again. Great pick!
Makes a lock body that's harder to twist break.
Leaves one of the most commonly used screws completely exposed, which can be removed without unlocking the core, holding the shackle in.
Loving the new camera set up, much clearer.
A nice beefy lock. Love the rotating body. I think the core being threaded would have made that lock a much more difficult pick. LPL made that look so easy when in fact security pins and devilish warding are fighting you all the way.
Great picking LPL
My work has one of these on a shipping container, but has an M1 keyway. Not exactly the best pairing. (It's cross-keyed, too!)
Nothing a few stern looks can't open
Beautiful lock my friend would love to own one .😎
I'm not sure I get this, with the lock closed you use the Allen screw to remove the shackle and the whole lock came apart, why father to pick the lock?
Crap! I looked away for like 8 seconds and missed the whole picking!😂😂
I would love to see this lock put back together
Very nicely picked my friend, Great video
I love that he continues with the video after it is demonstrated that you can defeat the lock with an Allen wrench set, sae or imperial not stated
Not really, since the Allen screw in the side is only there to keep the shackle in while the lock is open. When it's locked, the locking lugs hold it on both sides.
"This is the Lockpicking Lawyer and nothing gets in my way as usual".
Should be the title of every video.
You should make a how to video for beginner lockpickers. Just the basics and maybe even a quick tool tutorial on what kind of tools to use. Thanks!
He can only put out so much information or else He becomes a training channel for crooks.
Aww I was kinda hoping you'd disassemble the lock body properly. With the core being so readily switchable, I didn't honestly see the value in crackin' it open - the interesting thing about this lock for sure seemed like the spin-a-muh-thing.
this is the nosed picking layer it amazing how easy these noses are to pick
Lol I imagine you make a lot of people mad with those skills.
#toocoolforskool great picking, was expecting standard pins as you made it look so easy👍
Cheeses man! The lock manufacturers must love you!
Very interesting lock-concept!
What I particularly like about it, is the fact, that one could use any standard euro-core inside!
Speaking of which - dear lockpicking lawyer - which core would you consider the go-to best choice for pick-proofing your house and garden-shed?
I want to have the same key for house-door, shed-door and garage.
So I would need a very secure and preferrably non-pickable core.
I thought of the EVVA 3KS for a while but to my surprise it has been picked several times on RUclips already.
Please up-vote so he sees this comment, since I think his suggestion of a very secure and hard to Pick core might be in the interest of more people then just me.
Wait. Tha't a door lock cut in half in there.
Is that BosnianBill's Rotalock?
UnnamedSeeker No... that’s a really common way to set them up.
some of these locks are so beefy I expect to see a cowboy trying to herd them. Though if I had a shipping container full of flat screens id spend the bucks to get the best and beefyist.
i can picture bored sailors trying to break into containers during their off time for fun and treasure
Sounds like customs workers.
Watching these videos make me want to become a locksmith.
I am amazed how quick you can get into locks, obviously though if this was on a shipping container it would be a lot more awkward to pick open, by that time a thief would be caught.
Was about to say rotalok is a valve used on A/C systems (I'm a qualified A/C technician) but the valve is rotalock
It's Bill's pinning tray, yay!
Niiiice lock. Could use one of those on my sheet-metal tool shed.
If this guys voice wasn’t as smooth as velvet I wouldn’t give a fuck about the rotalock.
I'm watching your videos because I'm researching the best security to protect my "pressious bullions" and from your videos I understand that locks or safes don't work atoll, possibly the best "SAFE" is outside and away from your home, bury your stuff in a barn or somewhere that will be almost impossible for a thief to find
Damn thing looks like an inverted beer can in your hand while picking... pretty imposing from the outside. If you don't have anything to secure with it, I imagine it would provide a hell of a thump upside a trespasser's head!
Notice that he said an experienced picker. Our LPL just makes it look easy, it's not.
Just do the same thing he does and it's easy. He is full of himself.
@@Hunter_Bidens_Crackpipe_ That's the same thing as saying "just do what an artist does" if you want to be able to paint the same picture as them. It is a skill that requires development. Either way, he wasn't bragging and saying that anyone who was experienced could pick that lock that was in it. He also mentioned that the core of the lock could be replaced with one of way higher security if you so chose.
@@CyberianFaux , Thank you, I'm glad somebody understood.
"Just do the same thing he does and it's easy."
You're absolutely correct! However, you're leaving out the part that says 'being able to do the EXACT same thing he does takes a very long time and a lot of hard work." I'm thinking that's probably important.
C'mon man.
@@Hunter_Bidens_Crackpipe_ Dude LPL brings locks to the cinema to train during commercials he isn't full of himself he is accuratly reporting on the fact that he has experience picking locks.
Don't be jealous because you have no skills in life.
You never fail to amaze me, way to go.
Ive got a few of these Many moons ago,the first one I ever got had a bog standard 5 pin front door key type I kid you not!!! I upgraded to an Assa Twin combi core.
Probably ex-military 🙂
@@anononomous Ha-Ha Nice 1 :-)))
"This is the LockPickingLawyer and I'm here at the docks with Bosnian Bill and our generic henchmen. We've identified these high value shipping containers by their use of the RotaLok I've previously featured. Today we will be profiting right after a click out of two, nothing on three, four is binding, small click out of five, nothing on six... back to one... and it seems we have the shipping container opened. Looks like there are several cases of high priced whiskey, some beer, and oooohhh someone is shipping their Lamborghini! Guess I'm riding home in style. That's all I have for you today. And remember, everyone wear your masks and stay safe out there."
I would love to see a lock where the core itself freely rotates so that it cant be tensioned and when the key is inserted it binds with the outer layer in some way to actuate the locking mechanism
What you're talking about sounds like a patent number waiting to be filled so you best hurry it up.
@@moviemaker2011z I'm automotive engineer not a locksmith lol
@@AntaresSQ01 so? An idea is still an idea. And I really like your idea, LPL could probably still pick it, but it would be cool to see an actual device like that.
@@moviemaker2011z How does one patent an idea and does it cost anything? haha this is more of a challenge lock idea i'm thinking of rather than a production lock, i'm sure a messed up warding will provide the same results
@@AntaresSQ01 you know, I dont actually know how one would go about making a patent, my assumption is that you would have to find a firm of some sort that would assist with filing for the products patent number but I dont know the essentials.
Edit: just looked it up, the idea would have to first be created and you must keep careful notes about every step of the process making it. Be sure it qualifies for patent protection, assess the commercial potential of said product, be sure to make sure your product isnt already on the market or awaiting patent approval, prepare and file with the USPTO where you can get a regular patent application RPA or a provisional patent application PPA. And yes it does cost to file. But hey, I guess it would still be an amazing challenge lock if you found some way to make it, such as 3d printing or computer generated. Hopefully someone sees your idea and will make it for LPL.
Yes, a nice variety of different security pins in that lock - still had little effect on LPL!
Imagine you need to lock pick out of a danger room.The lockpicking lawyer has escaped as you were reaching the lock.
Great picking as always brother and thanks for the review!
Got to love the longer videos. 🥰
Great new video, first time I've seen your personalised tray, then again, I am new to your channel, it looks good!
"Let's open this new one up" tosses keys to the side...
I have resisted saying it for a while now but dammit, you sound like my old Dentist Mr Simms who I visited as a kid. You even have the same tone, that cold quiet confidence of getting the job done. Its eerie. 😑🙃
Beautiful padlock!
Since the alan slot is exposed, couldnt you just take the shackle off and not even worry about picking it?
The other side would still be locked, so you can not pull it out
@@DerEineIch Actually, both sides will be locked. The pin behind the allen screw is just to keep the shackle in place while the lock is open.
absulutly amazing I don't know how u do it skill and a lot of practising I suppose any way keep up the good work thanks stiglocks..r..
You have some excellent content in here. Can you please make a video on the best locks available in the range of 15-50 Dollars? Would really appreciate if you do so. Thanks.
Master No3
Bosnianbill did a great video explaining the best padlocks at various price points. ruclips.net/video/nsJZ_kKjXcE/видео.html
Herbert Wingfield I know right?
@Herbert Wingfield
Its really not a bad lock. Its tougher than 99% of what anyone will put it on.
Very satisfying to hear those pins click out...
Lock picking lawyer I see no videos of you picking abloy padlocks, please have a video of abloy someday. You are the best picker in the world.
I have seen this lock used here in Australia on a few utility cabinets and such.
Interesting key pins. DOM uses them for decades, so ABUS finaly uses them too. I wonder a bit about the ABUS core, it's a snapped euro cylinder like made by an amateur :)
Keymaster It’s REALLY common for people to snap cylinders to set these up.
So, someone could just remove that hex head screw and the entire shackle comes off?
Not while it is locked, I suspect.
I was thinking the same thing. I may be wrong but it seems locked when he unscrewed it
Rewatched and it does seem he leaves it unlocked so like weretyu said that might be the reason
Very impressive pin tray there!
You are the best of the best .
Waited for this ever since the beefiest locks video!
Scariest movie ever.
“The maniac can’t get me in this safe room!!!”
From outside the door…”nothing on 1 a click out of 2”
I love that the follower is green ;D
It's kind of fitting for these vids that in the UK an Allen Wrench is called an Allen Key! 😊
Well, then at least he has one useful key
One concern I have is that it takes only a few seconds with the Allen tench to open it up and how it is accessed seems fairly easy to get to.