The install wasn’t difficult but since they came with Pre drilled holes which were on the wrong spot I had to improvise and drill new holes. Storage capacity is not a lot but perfect for around town only in my opinion. You can a few water bottles, small tool kit and a sweater or hoodie. I got them bc they were heavily discounted and that way it was well worth it to get them.
I’ll do a follow up Video with some more information on them with some storage Test, open close etc.. since I’m planning to take them off for something else or maybe keep it empty as of now.
Dang I got really cheap back then. I got the from their website. They were 50% off with an additional 20% off. I paid like $100 ish. Sweet bags though, perfect for around town.
What set up are you running on your handlebars? I want to get a riser but I’m not sure what length extension I’ll need wire wise. Also are those the stock bars?
I have to correct myself, by riser I meant spacer which go with stock riser. I’ll leave you a link to the spacers. With everything stock my handlebars are now about 12.4 inches tall and still some slag in the brake cable. So up to 13 or 13.5 inch with stock should be fine. www.bungking.com/handlebar-t-bar-lift-kit/
Hey Belal...did you have to relocate lights or mod the viking bag to fit bike? I have the same exact bike and tried to install the Viking bag Loki and there isn't enough clearance to open the bag. Please advise, Thanks!
Hey Tom, I didn’t relocate the turn Signals. The fit is a little tight, but after a while the leather of the top lid gets softer and broken in. Watch my new video which is coming up soon, you’ll see how I open the bags and how it’s positioned. One tip I can give for the install is not to rely on the wholes which are pre Drilled. I had to make new wholes in order it to fit properly.
@@MotoBeardLA Thanks Belal, at the moment I'm about to return it. The bags arrived on Oct. 24th, tried to install it but having the main issue with not enough clearance to open the bag. Barely got my bike, it has 73 miles on it now. Just a quick tip for you if you want black spokes on your bike then search ebay for spoke wraps and get some black ones. It comes in 72 pieces, I'd order 2 packages then wrap your spoke in black...looks awesome and change the way your bike looks for less then $20!!!
@@MotoBeardLA What tuner did you go with for when you did your intake and exhaust? I'm getting vance and hines short shots and arlen ness big suckers with fuel pack 3, then do torque cam too!
If you care about maximum power I wouldn’t get the Vance and Hines short shots. I used the V&H Fuelpak 3 and Autotuned the map. I’m doing a torque cam upgrade soon.
![CRAZY 1000HP Terminator Cobra Whipple Supercharged [4K]](/img/1.gif)
I’d like to see more on the Viking Loki saddle bags. How was the install, storage capacity, view the inside, a good full review.
The install wasn’t difficult but since they came with Pre drilled holes which were on the wrong spot I had to improvise and drill new holes. Storage capacity is not a lot but perfect for around town only in my opinion. You can a few water bottles, small tool kit and a sweater or hoodie. I got them bc they were heavily discounted and that way it was well worth it to get them.
Oh man I looooove my Predator III seat. 🤘🏼🤘🏼
It’s the best bang for the buck. It’s a high quality seat which holds you in place and is comfortable.
Enjoy and ride safe!🤞🏽🤞🏽✌🏽✌🏽
Can you show inside the saddlebags and opening and closing
I’ll do a follow up Video with some more information on them with some storage Test, open close etc.. since I’m planning to take them off for something else or maybe keep it empty as of now.
bike looks awesome!
Thx 🙏🏽 appreciate it
Looks like you got the Michelin commander 3 tires?
woah
Those bags are $280 now. Did you buy them on Viking's website?
Dang I got really cheap back then. I got the from their website. They were 50% off with an additional 20% off. I paid like $100 ish. Sweet bags though, perfect for around town.
What set up are you running on your handlebars? I want to get a riser but I’m not sure what length extension I’ll need wire wise. Also are those the stock bars?
Hi Traye, I’m using stock handlebars with 1.5 inch riser. Are you planning to work with stock clutch and brake cable?
MotoBeardLA which brand riser did you end up getting?
I have to correct myself, by riser I meant spacer which go with stock riser. I’ll leave you a link to the spacers. With everything stock my handlebars are now about 12.4 inches tall and still some slag in the brake cable. So up to 13 or 13.5 inch with stock should be fine.
www.bungking.com/handlebar-t-bar-lift-kit/
MotoBeardLA sweet thank you!
You’re very welcome! Let me know if you ever have any question regards Upgrades.
Who did you use for the license plate relocation
I did not relocate my License Plate. It is where it came from Factory (Left side)
Hey Belal...did you have to relocate lights or mod the viking bag to fit bike? I have the same exact bike and tried to install the Viking bag Loki and there isn't enough clearance to open the bag. Please advise, Thanks!
Hey Tom, I didn’t relocate the turn Signals. The fit is a little tight, but after a while the leather of the top lid gets softer and broken in. Watch my new video which is coming up soon, you’ll see how I open the bags and how it’s positioned.
One tip I can give for the install is not to rely on the wholes which are pre Drilled. I had to make new wholes in order it to fit properly.
@@MotoBeardLA Thanks Belal, at the moment I'm about to return it. The bags arrived on Oct. 24th, tried to install it but having the main issue with not enough clearance to open the bag. Barely got my bike, it has 73 miles on it now. Just a quick tip for you if you want black spokes on your bike then search ebay for spoke wraps and get some black ones. It comes in 72 pieces, I'd order 2 packages then wrap your spoke in black...looks awesome and change the way your bike looks for less then $20!!!
Thanks for the awesome tip, will look into it. Let me know if you have any questions regards the bike.
@@MotoBeardLA What tuner did you go with for when you did your intake and exhaust? I'm getting vance and hines short shots and arlen ness big suckers with fuel pack 3, then do torque cam too!
If you care about maximum power I wouldn’t get the Vance and Hines short shots. I used the V&H Fuelpak 3 and Autotuned the map. I’m doing a torque cam upgrade soon.