This actually helped me realize I was a disgusting human being and needed to clean my toilet. Thanks tushy for helping me face and conquer my own demons
I just wipe mine down every week or so. It’s not gross, takes literally two minutes. Nice to not have to put it off, have a dirty toilet and then have to do a nasty deep clean later 😂
Just installed mine using this video and only had to pause twice. Soo happy it was so easy to install. Looking forward to using it, I literally ate a fiber bar v
You'll need Plumber's/Pipe tap and possibly a couple of rubber washers also please use a wrench or pliers. Hand tight won't work for most water pressure regions. Otherwise its a very good product. Just installed our 3 Tushy for the house.
For those watching: take into account that your toilet might be right up against your wall!! That makes unscrewing/screwing pieces really challenging! So be as patient with yourself as possible 😂
Yeap! Spent over 2 hours trying to unscrew a stuck bolt and watching RUclips videos for that prior to installing my toushy. Thank goodness I was already planning to replace my toilet seat and had new one available as I have to cut the plastic holding the bolt in order to get it out.
The video is informative and helpful, but not all toilets are as Tushy friendly (or any other bidet). I had to go to the hardware store to 3 times to buy different pliers, and new toilet connector. It was a nightmare, but finally got it installed.
I’m pretty handy but your pretty awesome so I wanted to make sure I followed all the Rt steps. This will be my second tushy installation. This time it’s for a family member whom was curious about my portable tushy. 🙂👍🏼😎 Thanks Carrie joe from California
Great video except my toilet doesn't have a flexible hose that leads from the tank to the wall. It's a rigid pipe that doesn't bend. So I can't connect the tushy adapter to the hose, then to my tank. Tushy or anyone, can you help?
Hi KimberWarrior! We can place an order for a flexible hose that you can use to replace the one you have now-our treat! All you need to do is take care of the $4.99 shipping cost. Here's a helpful video on how to install that: ruclips.net/video/I2ZWN8p5cqo/видео.html. Can you kindly shoot us an email at install@hellotushy.com and provide your order number and shipping address, so we can you a flexible hose!
I have been medically diagnosed with the intelligence of a bird and had no problem installing this. Thank you for the video. All should go well as long as you follow directions!!! If you must know, I tried it soon after installing it without having gone number two, chunks of residue appeared in the bowl; it was disgusting!
I'd recommend taking the whole thing off the toilet every couple of months, and wiping it down with a gentle natural cleanser. The nozzle itself is self cleaning, so you don't have to worry about that :)
How long of a bolt will I need to attach my new Tushy to my Kohler Cimarron toilet seat? The current bolts are only long enough for the toilet seat by itself (approx. 1-3/8").
@@HelloTUSHY I'm referring to the 2 bolts that hold the Tushy between the toilet seat and the toilet bowl. The current 2 bolts are just long enough to hold the toilet seat to the toilet bowl after screwing on the nut. If I try to attach the Tushy then the screw is not long enough. In your installation video you say to "check out the video on needing longer screws." Where would I find that video? Thanks!
We haven't published that just yet, but it should be available very soon! If you need any help installing the Flushometer Kit, you can always email us at Install@hellotushy.com :)
Was easy to install. However, the main water valve stem now has a very slight drip which I didn’t have before. Tried to find the sweet spot where it would completely stop but the best I could do is open fully and then back off slightly but still leaks.
@@blatherskitenoir plumbing tape doesn’t help with this type of thread. There is a small rubber gasket that this fitting uses to seal the fitting. It’s possible they got some debris in the gasket, it fell out, or they put two gaskets onto the fitting. The old gasket might also be old and hardened so it wont seal very easily. That would require replacement. One more possibility, like mentioned in the video, is a cross threaded or misaligned thread on the fitting. Sometimes that is hard to notice.
Ok looks easy. But I have a skirted toilet with a connection that's almost on the floor, and it's on the LEFT side of the toilet, not right, as all these videos show. So the deal is, do you make TUSHY with with the facing up buttons on the LEFT SIDE? There's no way I can get the water pipe over to the right side to make this work!
This was an easy install. If not for some cleaning, some distractions, and a little caution with each step, it would be an under ten minute job. Thanks I did not even bother with the booklet.
I wish that I knew about this VIDEO ??? Why is NOT noted to view within the Instruction package ? It certainly would have made my installation easy ! ! !
The Spa connects to your sink's hot water line. A pedestal sink is simply the example we had here. The Classic doesn't need a sink connection for installation though :)
Hi there! Thanks so much for reaching out about this! If it's a flushometer toilet, that's no problem! You will just need to use your sink's plumbing instead. We don't have a video installation of the Flushometer kit, yet. But don't worry! For installation, can you kindly send us an email at install@hellotushy.com? So we can send you the instructions on how to install it.
Has anyone had to use plumbers tape? I don't want to overtighten and I feel that it's tight enough, but leaking from the toilet tank valve. I'm going to try it
If you’re hand-strength challenged, I do recommend gently using a wrench once you are absolutely sure it’s threaded right. I had a very difficult time with the front attachment hose to the bidet because I couldn’t see how it was lining up because it’s such a tight fit between my sink cabinet and the toilet. So I removed the hoses and attached that the bidet hose piece FIRST before attaching it to the toilet and that finally worked without leaking 😂 All in all this was quite doable, even for a senior.
Easy as could be, except that the connection from the wall to my tank was so tight, I had to go to the hardware store to get slip pliers and vice grip locking pliers (I'm at a friend's house and she has no tools except a screwdriver). After that it was easy until I sat on it to test it and it was spraying up my butt crack and nowhere near my butthole. That's when I realized what those slit s are for around the Tushy where you put the toilet seat screws. I aligned them parallel to the toilet seat and was able to pull the whole Tushy towards the front, which put the spray jet in just the right place. I think that could have been covered a little bit more in the video, how to adjust properly. In my case I had to pull the Tushy allllll the way forward to get it in the right place. I tightened the screws at the very end of the slits. Other than that, great video and easy install.
after about an hour of literally laying under my toilet trying to thread and rethread this cheap plastic fitting I gave up- the other fittings are metal and this plastic fitting is useless...what a waste of time and $-now I have a toilet that does not work at all because I cant get get the plastic off! Very disappointed and hopeless!
Well. Your plastic three way adaptor is shite. Almost impossible to connect flexible metal hose that connects the bidet with the water source. Had to wet down the plastic. Would have preferred all metal parts but then perhaps that would've cut into your profits. Annoyed by the process
THIS IS NOT AT ALL SIMPLE TO INSTALL! Not as simple as she makes out. I had trouble removing the flex hose and will now probably have to pay plumber $200 bucks to fix the problem.
Hi there! We're so sorry you're having trouble installing your TUSHY! Please shoot us an email at install@hellotushy.com and our install experts will definitely help you out!
Not an easy install. Most people buy it because it’s advertised that way, but definitely not easy. The provided parts are very cheap and crack easily, causing leaks. The portion that attaches to the seat is too thick either causing the seat to constantly pop off, causing the seat to slide left and right or causing the seat to not lay flat when it’s down. It’s definitely not compatible with many toilet seats.
Got it today. Had the plastic washer she mentioned as apposed to metal. Did not fit with anything and toilet water went EVERYWHERE in my new house. The disclaimers were not applicable at all. Right now its 2 am here and I just got an emergency plumber because of this mess. He said its not latching on. I'm so disgusted I will never do a these influencer bidets again! (Ive installed bidets in 5 places before this both seat and nozzle ones). So upset
This actually helped me realize I was a disgusting human being and needed to clean my toilet. Thanks tushy for helping me face and conquer my own demons
I just did this on someone else's toilet and realized how disgusting her toilet was! Ew!
Same mine was revolting but with a little hydrogen peroxide it was all ready
I just wipe mine down every week or so. It’s not gross, takes literally two minutes. Nice to not have to put it off, have a dirty toilet and then have to do a nasty deep clean later 😂
Just installed mine using this video and only had to pause twice. Soo happy it was so easy to install. Looking forward to using it, I literally ate a fiber bar v
You'll need Plumber's/Pipe tap and possibly a couple of rubber washers also please use a wrench or pliers. Hand tight won't work for most water pressure regions.
Otherwise its a very good product.
Just installed our 3 Tushy for the house.
For those watching: take into account that your toilet might be right up against your wall!! That makes unscrewing/screwing pieces really challenging! So be as patient with yourself as possible 😂
Yeap! Spent over 2 hours trying to unscrew a stuck bolt and watching RUclips videos for that prior to installing my toushy. Thank goodness I was already planning to replace my toilet seat and had new one available as I have to cut the plastic holding the bolt in order to get it out.
The video is informative and helpful, but not all toilets are as Tushy friendly (or any other bidet). I had to go to the hardware store to 3 times to buy different pliers, and new toilet connector. It was a nightmare, but finally got it installed.
I’m pretty handy but your pretty awesome so I wanted to make sure I followed all the Rt steps. This will be my second tushy installation. This time it’s for a family member whom was curious about my portable tushy. 🙂👍🏼😎
Thanks Carrie joe from California
Let us know if you need any help!
@@HelloTUSHY I got it installed thanks !
Will this work with caroma caravelle toilet?
you changed my life, thank you. This is a brilliant product 🙌
Can you do anything about the gap between the bowl and the lid that’s created by the Tushy?
Shoot us an email at Install@hellotushy.com! We can help you out :)
@@HelloTUSHYYou should just answer that here. It’s a very common and discouraging problem.
Great video except my toilet doesn't have a flexible hose that leads from the tank to the wall. It's a rigid pipe that doesn't bend. So I can't connect the tushy adapter to the hose, then to my tank. Tushy or anyone, can you help?
Hi KimberWarrior! We can place an order for a flexible hose that you can use to replace the one you have now-our treat! All you need to do is take care of the $4.99 shipping cost. Here's a helpful video on how to install that: ruclips.net/video/I2ZWN8p5cqo/видео.html. Can you kindly shoot us an email at install@hellotushy.com and provide your order number and shipping address, so we can you a flexible hose!
This video has a metal / brass connector but mine came with plastic - how can I order the brass one from Tushy?
Right… because the one provided is a very cheap plastic one that cracks easily.
I have been medically diagnosed with the intelligence of a bird and had no problem installing this.
Thank you for the video. All should go well as long as you follow directions!!!
If you must know, I tried it soon after installing it without having gone number two, chunks of residue appeared in the bowl; it was disgusting!
Loving my Tushy bidet! Would you have recommendations for how to clean it, and how often?
I'd recommend taking the whole thing off the toilet every couple of months, and wiping it down with a gentle natural cleanser. The nozzle itself is self cleaning, so you don't have to worry about that :)
How long of a bolt will I need to attach my new Tushy to my Kohler Cimarron toilet seat? The current bolts are only long enough for the toilet seat by itself (approx. 1-3/8").
Hi Janna! Are you referring to your flexible toilet hose?
@@HelloTUSHY I'm referring to the 2 bolts that hold the Tushy between the toilet seat and the toilet bowl. The current 2 bolts are just long enough to hold the toilet seat to the toilet bowl after screwing on the nut. If I try to attach the Tushy then the screw is not long enough. In your installation video you say to "check out the video on needing longer screws." Where would I find that video? Thanks!
Gotcha! Please send us an email at install@hellotushy.com and we will send you a pair of Universal screws and the instructions on how to use them.
@@HelloTUSHY Thank you so much! 🙂
This video made install insanely easy for me who is handy-challenged
Amazing! That's what we love to hear 💕
Hello, you mentioned a video about installing the Flushometer Installation Kit but I can't seem to find it. Can you provide a link? Thank you!
We haven't published that just yet, but it should be available very soon! If you need any help installing the Flushometer Kit, you can always email us at Install@hellotushy.com :)
Orders of 2 and more need to come with a complimentary "ask me about my butthole" tee 🤭
They would be sued. That’s trademarked.
Was easy to install. However, the main water valve stem now has a very slight drip which I didn’t have before. Tried to find the sweet spot where it would completely stop but the best I could do is open fully and then back off slightly but still leaks.
Shoot us an email with some photos at Install@hellotushy.com, and we can help with that!
Maybe try some plumbing tape
@@blatherskitenoir plumbing tape doesn’t help with this type of thread. There is a small rubber gasket that this fitting uses to seal the fitting. It’s possible they got some debris in the gasket, it fell out, or they put two gaskets onto the fitting. The old gasket might also be old and hardened so it wont seal very easily. That would require replacement. One more possibility, like mentioned in the video, is a cross threaded or misaligned thread on the fitting. Sometimes that is hard to notice.
Do you have a video for the heated model?
Ok looks easy. But I have a skirted toilet with a connection that's almost on the floor, and it's on the LEFT side of the toilet, not right, as all these videos show. So the deal is, do you make TUSHY with with the facing up buttons on the LEFT SIDE? There's no way I can get the water pipe over to the right side to make this work!
"Ask me about my butthole"
"Finger tight is right"
This was an easy install. If not for some cleaning, some distractions, and a little caution with each step, it would be an under ten minute job. Thanks I did not even bother with the booklet.
Before I install will the tushy water be warm or pipe ice cold?
This video made it so easy!!!
What is new with the 3.0
New mounting mechanism, a slimmer design, and shmutz shield to keep it clean!
Will we need to buy seat bumpers to make it straight? Will you guys include some?
Yup
What if my toilet doesn’t have a flexible hose?? My toilet just has a pipe for the water connection
Shoot us an email at Install@hellotushy.com, and we can help you out!
Easy installation, thanks!!!
I watched this video sitting on my toilet for the LAST time without a Tushy! 🙌🏼
How do we get the shirt!?
Where do I get one of those t shirts ?
Where can I get a metal mega adapter?
Maybe I didn’t install it correctly but the water spout is off centered - so I have to adjust my butt to get the cleaning done.
I can't find the flushometer install video.
Hose that goes from my tank to the pipe isn't flexible so the adapter's size makes it impossible to get to the connector under the tank.
Go to the hardware store and buy a flexible pipe then...
This didn't warn about the possible 30 years of dried urine caked into the toilet seat connection
Improve your aim!
@@angeliabrantley3919 hint...im younger than 30 😬
😂
Sit down to pee!
I wish that I knew about this VIDEO ??? Why is NOT noted to view within the Instruction package ? It certainly would have made my installation easy ! ! !
So the 3.0 only works if you have a pedestal sink?
The Spa connects to your sink's hot water line. A pedestal sink is simply the example we had here. The Classic doesn't need a sink connection for installation though :)
Where is the video on how to install for a flushometer toilet?? I can't find
Hi there! Thanks so much for reaching out about this! If it's a flushometer toilet, that's no problem! You will just need to use your sink's plumbing instead. We don't have a video installation of the Flushometer kit, yet. But don't worry! For installation, can you kindly send us an email at install@hellotushy.com? So we can send you the instructions on how to install it.
Has anyone had to use plumbers tape? I don't want to overtighten and I feel that it's tight enough, but leaking from the toilet tank valve. I'm going to try it
How you keep water from going through the gap on the front of the toilet seat?
The water hits your butt then falls straight down into the bowl :)
I'm gonna buy it right now .-. that's a great cheaper way to have a bidet ^-^
Great step by step video
If you’re hand-strength challenged, I do recommend gently using a wrench once you are absolutely sure it’s threaded right. I had a very difficult time with the front attachment hose to the bidet because I couldn’t see how it was lining up because it’s such a tight fit between my sink cabinet and the toilet. So I removed the hoses and attached that the bidet hose piece FIRST before attaching it to the toilet and that finally worked without leaking 😂
All in all this was quite doable, even for a senior.
Easy as could be, except that the connection from the wall to my tank was so tight, I had to go to the hardware store to get slip pliers and vice grip locking pliers (I'm at a friend's house and she has no tools except a screwdriver). After that it was easy until I sat on it to test it and it was spraying up my butt crack and nowhere near my butthole. That's when I realized what those slit s are for around the Tushy where you put the toilet seat screws. I aligned them parallel to the toilet seat and was able to pull the whole Tushy towards the front, which put the spray jet in just the right place. I think that could have been covered a little bit more in the video, how to adjust properly. In my case I had to pull the Tushy allllll the way forward to get it in the right place. I tightened the screws at the very end of the slits. Other than that, great video and easy install.
Gross!
after about an hour of literally laying under my toilet trying to thread and rethread this cheap plastic fitting I gave up- the other fittings are metal and this plastic fitting is useless...what a waste of time and $-now I have a toilet that does not work at all because I cant get get the plastic off! Very disappointed and hopeless!
Well. Your plastic three way adaptor is shite. Almost impossible to connect flexible metal hose that connects the bidet with the water source. Had to wet down the plastic. Would have preferred all metal parts but then perhaps that would've cut into your profits. Annoyed by the process
You went past the bowl alignment too quickly.
Review: Flooded my entire bathroom.
So the water is ice cold?
No, it's generally room temp, but TUSHY Spa connects to your sink for temperature control!
Hi I installed, the water goes to the tushy but not the toliet. Help!
Hi there! Please send us an email at install@hellotushy.com and we will definitely help you out!
Where’s the Flushometer toilet guide
THIS IS NOT AT ALL SIMPLE TO INSTALL! Not as simple as she makes out. I had trouble removing the flex hose and will now probably have to pay plumber $200 bucks to fix the problem.
Hi there! We're so sorry you're having trouble installing your TUSHY! Please shoot us an email at install@hellotushy.com and our install experts will definitely help you out!
Not an easy install. Most people buy it because it’s advertised that way, but definitely not easy. The provided parts are very cheap and crack easily, causing leaks. The portion that attaches to the seat is too thick either causing the seat to constantly pop off, causing the seat to slide left and right or causing the seat to not lay flat when it’s down. It’s definitely not compatible with many toilet seats.
Got it today. Had the plastic washer she mentioned as apposed to metal. Did not fit with anything and toilet water went EVERYWHERE in my new house. The disclaimers were not applicable at all. Right now its 2 am here and I just got an emergency plumber because of this mess. He said its not latching on. I'm so disgusted I will never do a these influencer bidets again! (Ive installed bidets in 5 places before this both seat and nozzle ones). So upset
How can you connect with the warm water
You can see the Spa Version installation here - ruclips.net/video/wqpjw5YUy-k/видео.html&ab_channel=HelloTUSHY
This last is way too much. Please make a regular video.
i wonder if she wears that shirt out in public lol.
This video makes it easy! It's so easy a woman can do it...
Are you implying women are dumb?
Very immoral shirt.
being lewd is not humorous.
Once you push past the embarassing millenial marketing the thing isnt bad at all.