Creating A Strong And Sharp Short Knife From A Pile Of Normal Nails!
HTML-код
- Опубликовано: 17 апр 2023
- Creating a Strong and Sharp Short Knife from a Pile of Normal Nails!
My Other Knife Videos:
Incredible Custom-made Knife That I Made In 1 Day: • Incredible Custom-made...
Mega Sharp Dagger Made Of Damascus Steel: • Mega Sharp Dagger Made...
Created an Incredible Dagger with a Brass Handle from an Ordinary Piece of Metal: • Created an Incredible ...
Creating an Unrealistically Sharp Knife from a Piece of Metal and Bamboo: • Creating an Unrealisti...
I Made An Incredibly Sharp Knife Out Of An Ordinary Piece Of Metal: • I Made An Incredibly S...
#knife #sharp #metal 
Хобби
oh those are powder actuated concrete nails. that's good steel right there 😎👍
HE IS FINALLY WEARING A MASK!!! AM SOO HAPPY ❤☺ but please wear it while using the grinder or cutting metal to protect your lungs from metal dust! And also eye protection.
Iii
Finally, someone who knows how to use the damn flux. 👌
Those were some pretty hard nails to begin with, I noticed the sharpened tips of the nails did not flatten or bend when you drove the washers off with a hammer.
Жарайсын шебер жігіт, қолың дерт көрмесіне .
how do you grind a perfect bevel with an angle grinder. great work man, keep up the work :)
Попробуй в следующий раз расковать не в полосу а в квадрат,закрутить по часовой стрелке, после разрезать,сложить, расковать в квадрат и закрутить против часовой стрелки. После этого разрезать,расковать в полосу и делать нож. Уверяю тебя рисунок будет гораздо красивее... Да...работы прибавится,но это того стоит. С твоим парком станков это будет не сложно.
Хорошо буду пробовать
нож из гвоздей?да даже того что он сделал-уже много.это просто железяка,не нож.там нету углерода.только бананы и резать таким ножом.и еще,если даже сделать все,о чем ты пишешь,все равно ничего не выйдет.получиться однородное железо.для рисунка надо использовать разные сорта стали в пакете.там и углеродка и железо и хром и никель.тогда и только можно получить красивый и яркий ресунок.
AWWWWW SNAP!! LOOKS GREAT!!!
Nice video!
ผงที่ประสานเหล๊กคืออะไรครับ
amazing video #greatskills
This is why I LOVE❤ watching your videos. You take shit like these thick steel Rivets and make knives 🔪 out of them, just like you would if you were living in an “Walking Dead” type Situation. It also doesn’t matter how much flux you use, as long as you get proper results in your project, as seen clearly here. It’s kinda hard to believe that they were Steel Rivet’s at the end of this video. Keep up your amazing work man🔪🔪💪💪🔥🔥💯💯💯💯
Expensive knife with time and matterial
Nice!
Mr Borax ^^ he should have put the piece in the middle perpendicular and close with the other two pieces in length
The knives you make are works of art, beautiful. Still would love to add one to my collection. Do you ever sell them?
Как у него еще пальцы и глаза сохранились с такой техникой безопасности 🫣
У настоящих мастеров не нуждается в этом техникУ безопасности
👏👏👍👍
People complain about how much flux he uses so he opens the video with the billet covered in flux. Boss move.
It also doesn’t matter how much you use, as long as you get proper results in your project, as seen clearly here. It’s kinda hard to believe that they were Steel Rivet’s at the end of this video
What a beutiful knife! 👍🏼
You should have worn that mask a long time ago.
buen video! una pregunta , que es ese polvo blanco que le ponen a la hora de ir forjando?
Obviously he has made a few knives in his time. I can't believe he isn't wearing glasses or a mask.
That is rather unique charcoal you’re using. Do you make your own charcoal?
바늘로 칼 만드는거 보여주세요
holy flux batman
do you guys think he just has one piece of rebar that he uses over and over in every video?
YOU ARE KEEPING THE STEEL A LITTLE TOO LONG IN THE FIRNACE, I CAN SEE THE STEEL IS STARTING TO CATCH ON FIRE 🔥.
Is that Flux he keeps adding?
😊😊😊
I just wonder !! What kind of power is it?
Have you made a khukri, a ghurka blade?
what name for powder?
What is that powder he puts on the hot metal?
Flux (borax) when it oxidizes it sucks the air out from between the nails making for a better weld
@@richq11 very Kool! Thank you!
Get Safety Glasses to wear around the shop..
Очень красиво
А из валов от ксероксов и принтеров будет дамасск?
Дамаск можно делать из всего.даже сталь с медью.
@@arthurpinchykov6118 это был не вопрос а спрос когда будут валы от принтеров
dökülen şey i merak ettim tuz mu
Salam sifariş qebul edirsiz?
I hate to be negative, but if you can drill the holes for the pins that easily, then the blade isn't properly hardened... That steel may require a water quench, if it can hardened at all. There may not be much carbon left after all those sparks
That's right, this iron is not suitable for making a knife, and all the carbon was burned out when overheated.
What does the flux do??
Or powdered metals?
La poudre blanche quoi ?
Making handel to thin for my liking😊
do you sell what you make to viewers?
No but maybe he sells it in his local area
@@vcommandarv5916 so what you are saying ...is yes.
@@papashakeshake6268 is no, he doesn't sell them to subscribers specifically
@@vcommandarv5916 you know this how? do you always speak for him?
@@papashakeshake6268 because there is no link to buy what he made, and I don't think he would waste resources and fuel to make a knife that he won't either sell or keep or give as gift to friends and family
I assume that he doesn't sell to subscribers because he doesn't provide a link to what he is made in the description or during the video which his subscribers will see
Dude you should really wear eye protection when using the cutting wheel
Next challenge would be drill bits than?
Usta turkmusun
Salutare Nenicule.
What is the powder used at 2:30?
It's blacksmith flux, usually made of borax. It's a substance that prevents oxidation during the welding and reduces the necessary temperature of impurities to melt.
❤❤❤❤❤❤💋💋💋💋💋💋👍👍👍👍👍👍
atılan beyaz toz nedir ?
Borax?
Nasîl sin çocuğum benim?iyi misin?
@@danipopescu2205 borax
Мда. Железо сжег знатно. что же ты его так перегреваешь? Уже на моменте отрезания шляпок гвоздей без защиты глаз хотел выключить это видео (ибо мастер, который не знает технику безопасности это не мастер), но любопытство пересилило и не зря, уже несколько видео как "мастер" просто портит материал.
100% мартышкин труд
а то,что нож полностью из гвоздей,без стали вообще,тебя не смущает?😂😂😂
@@arthurpinchykov6118 эти гвозди в бетон забивать, там минимум 0.6-0.8% углерода, при цементации можно поднять выше.
@@Drsollo ок,попробуй,закали и потом расскажешь сколько там углерода🤣еще и 0.6-0.8 захотел🤣🤣🤣
@@arthurpinchykov6118 да даже пытаться не буду.
not nails those are shot pins
nails are a type of iron that is so soft, you can't make the best knife out of a nail. I once thinned a nail without burning it. the nail iron was too soft
The nails he uses are power driven concrete nails. They are very strong high quality steel. Expensive nails
They're MUCH harder than your average framing nail.
Gas to meld it is free.? 😮 respect but I want to drive my car 😂
Masonry nails have been heat treated for hardness, but they are still low carbon, they can't reach a high level of hardness. Plus they've been coated for corrosion.
It's cheap material, not ideal for blades. Just for show.
And, with all that equipment, how about investing in a pair of safety googles?
Real naiuls arent made like those...those are Ramset Nails or something similar. metal is much harder.
Nóż z paznokci , no to komuś tłumaczenie nie wyszło.
Tj wlasine takie bezmysle uzywanie traslatora.
Crap grade steel (nails) =crap grade steel(blade)
Great skills but your metalergy leaves something to be desired.... 🙂
Clean your metal! You're getting zinc in the steel, and your lungs. I cringe every time i watch this guy weld dirty, rusted metal together. Btw, he should do a crucible project with his cutoffs.
Старинной ложкой посыпаешь буру, другой ложки не нашлось что-ли?
Если бы только в ложке проблема была))
@@Drsollo да проблемы нет вообще никакой.
@@user-lm1lb9hy5e проблем,как раз таки,через край.мартышкин труд.
Это не инструмент. Это мусор с узорами. Сталь плохая, для ножей не подходит совсем.
YOU HAVE NEVER BEEN TOLD TO WEAR SAFETY GLASSES,GO PUT A PAIR ON NOW..
I came here for this comment lol the guy doesn't care to wear anything lol
işçilik çok kötü
Nub😢
Це не цв'яхи а дюбеля!а вони забиваються в бетон,залізо і тд!тому це не простий метал
обычное железо с добавкой хрома.углеродом там и не пахнет.
@@arthurpinchykov6118 ну я не робив хімічний аналіз,тільки забивав !тому зробив такий висновок що це не прості цв'яхи
Xfds você quero e u. " CAT 86 PRO "
me dá um aí rico encubado 😅