PAT You will love it, the ease of use, repeatable grinds, the results, and the shavings you'll get with a properly sharpened tool, I struggled before I had this set up. Thanks for watching and commenting Take care Rob
I know this video has been posted awhile ago. But what a find. I have the same grinder and wolverine jig which I just purchased. You made it easy for me😁...thank you. Great video. Sub added.
Congratulations on you new set up Rob. I bought a knock off of that and the purchased the vari grind. Makes a huge differences Take care my friend and do a kindness Mark
it sure does, I could feel the difference in the cutting edge on all of the tools I sharpened in this video, im so happy with this set up Take care Rob
Hi Rob, thanks for the info. I purchased a Wolverine Jig and grinder second hand it came assembled and was mounted on a sheet of 1 inch plywood so it could be moved around. It just did not seem correct, and with no instructions I left it alone, I was never quite happy with it . I am heading down to the workshop to make the ajustments. Thanks again.
Welcome sure good looking and ell look advanced version and i hope hopefully you can add for your Diy projects craftsman work Shop.. happy new year wishes
Nice video Rob. I've been using the wolverine system also and its so easy keeping my tools sharp. I've tried the Yorkshire grit and Hampshire sheen on a few bowls and platters now---wow what a great finish. lol--a little plug for you.
RANDY It's a great set up, glad that you like the Yorkshire grit and Hampshire sheen. Thanks for the plug. 😉 feel free to head over to my website and leave a comment . I plan on doing a demo on tiwax soon.. oh and ebonizing.. Take care Rob.
Good solid how to video Rob. I have to say that I love the Wolverine, and have used it for about 3 years now, after replacing another system, that became very "sloppy" with use. Take care Mike
Good deal. I've had mine quite a few years. I would suggest that every now and then your check the angle your getting on the gouges. Not sure why, but mine seemed to get steeper as time when along. Only takes a second to get them back to the 40, 50 or what ever degree you want. (the settings that is) Enjoy.
Michael Hunter Absolutely, the problem with aluminum oxide wheels is, they wear down and you have to dress them, that will cause this over time, a cbn wheel is on my wish list. Take care Rob
thanks for watching, ive not seen that, i just touch the wheel as it spins, you really don't loose a significant amount of steel by doing that, but that tip may help someone. take care ROB
What is the size of the "V arm"which slides in and out the base for the jig? Its square tube set on its side, is it 1" tube or smaller or bigger than one inch. I figger the bar length is around 25" inches long. Why do I ask? Wood turning was second on my bucket list. Welding was first. I have fabricated my own wolverine jig, works fine. I am currently making other attachments. Right now I am making the veri grind jig. I would send pictures but no idea how to do that on youtube.
Hi Rob... I am in the process of setting up my Wolverine with the regular Vari-grind. Doesn't look like you took the rubber feet off your grinder. My instructions suggest doing that as it's possible for the feet to collapse after time. I took mine off and put them on the bottom of the board the setup is sitting on.
What would be the difference between having the rubber feet on the bottom of the grinder or on the bottom of the board the grinder is mounted on? The rubber feet would have the same weight and maybe compress over time. I have the same grinder and just built a stand for it today, next I guess I'll order the wolverine system as well, I'll get the wolverine jig with the platform and bases first as I won't be doing bowels for awhile so won't need the Vari Grind for a little while.
Great video, I have a question. I just purchased the Wolverine system and I'm ready to set it up. My question is, since the arms adjust front to back, why is it necessary to align the front of the base with the front of the wheel? It seems that all I need to be concerned with is that the horizontal alignment is correct?
Hi Ed Thanks for watching and glad it helped some. I have no complaints with the king grinder at all, had no problems with it so I recommend it Take care Rob
In my humble opinion as a Oneway dealer for 32 years the grinder should never be bolted to a wooden surface. Any inherent vibration in the grinder is transmitted to the board and magnified. The rubber grommets that come with the grinder should be placed under the spacer needed to raise the center measurement to the required height per the instructions. If the grinder does have significant vibration a balancing kit is available from Oneway to mitigate the vibration. When balanced a penny should be able to be placed on the grinder when running at full speed without falling off. The installation of a second platform is not required as the one included with the jig is more robust and easily moves from side to side. You should try to grind at roughly the same height as you turn.
The rubber grommets are still under the grinder this eliminating vibration to an extent, it has now been several years and im very happy still with the resulting grind/ edge that this setup gives my gouges.
Nice video, thanks! Setting mine up today. Couple of questions though - Doesn't the changing length of the tool (as it gets repeatedly sharpened) negate the usefulness of marking the bar? Also isn't the 2" measurement dependent on the angle of the grind? It seems to me there is an infinite combinations of bar setting and exposed tool length that would give the same angle.
Hi Yes the angle will slowly change due to the aluminum oxide wheel wearing down, that is the reason I replaced it with a CBN wheel, well worth the money, and you get a much better and sharper grind. You’ll enjoy using it. The 2” is standard watch other videos for others input 👍 Thanks for watching Rob
Hi the grinder cane with 180/320 grit aluminum oxide wheels, I have since changed to CBN wheels and what a difference, costly but worth the expense in my opinion.
Hey Rob! Thank you for this video. I have a question though. At 4:24 you mention that 'the grinder is flush with the front face of the bench' but at 4:56 you say 'the front edge of the base needs to be flush with the front edge of the grinding wheel'' ( hence the 1/4 of an inch gap bw the front of the bench & the wheel). Please help me sort this out !
I just purchased the same grinder and the Wolverine. I see the video was posted 5 years ago. Is there anything you'd do differently if you were setting it up today?
Hi Jim, its still essentially set up the same although i did move it over to the side of the bench so my drill press can share the same bench, space is limited, main important thing is that you have room to swing the tool from left to right, i put wheels on this bench so i can move it around if needed.
@@jimhyslop also highly recommend the 80 grit CBN wheel, its steel with diamonds so it doesn’t wear down, your grind is more easily repeatable and the cutting edge you achieve is superior imo
Now, if you want to take things to a higher level make the leap to the CBN grinding wheels. This will mean that you will never have to adjust the jig due to the stones changing in diameter due to wheel dressing. I love the Wolverine grinding jig!
Found you video - nicely done. I bought a lathe recently and have a set of 1950ish "Marple" made in England turning tools my Dad gave me - they were my grandpa's. Looking into sharpening options. In Canada that King 1/2 hp slow speed grinder is the lowest cost option for slow speed grinders - Rikon has a 1/2 hp for about 50% more than the King - and Busy Bee has a full horse unit for $100 more than the King. Rikon full horse model is more than twice the price of the King. Amazon sells a Wen but not keen on amazon tools. Has that King worked out for you over the past five years since you made this video? Any regrets on not getting a full horse model? I'm leaning towards the Wolverine Jig but looking at a few other similar options. Wolverine seems to be the most popular by far and only a little more than the others. I did watch a more recent video of your shop tour - and noticed the King grinder is still in service - with a CBN wheel. Is the 1/2hr adequate for that wheel - I've seen comments that it can't manage an 8" CBN. Not that I have a CBN but maybe when those original whites ware out I'd get one too. I'm in Alberta otherwise I'd stop in and see that fine set up.
@@WoodsleeSummercraftwoodturning Perfect - will likely pick one up soon - ordered the Wolverine Jig . Debated on the Craftex 1 HP for $100 more but could put that $100 towards a CBN wheel. I understand that it is OK to run one CBN wheel and the other side use an aluminum oxide grinding wheel.
@@DavidBealeakaFKD i dont use the other wheel at all to be honest The cbn does it all for me, im only touching up tools with it but it gives a great edge, superior to the aluminum oxide wheel
@@WoodsleeSummercraftwoodturning Did get the King 1/2HP Also picked up a Lee Valley CBN wheel (180) and left the 120 on the other side. The outside shield will not fit over the CBN wheel so will need to be careful. I thought I could post a picture in a reply on RUclips but don't see that as an option.
@@DavidBealeakaFKD ive been using my king regularly and its still going strong, the side does have to be removed to accommodate the CBN, i havent had any issue with that. Check out my website for woodturning finishes etc www.woodsleesummercraft.ca
The problem with scoring your bar, is after a few grinds of your tool ... to sharpen it, you are taking away material and in-essence shortening your gouge. That means the angle ... +length will be off by that much. The score will be off.
Mount whole system to a piece of 3/4 ply screw ply down to workbench. If you ever need to move the system unscrew ply with system move to new location re screw down. One time deal
You can do that too, no big deal, its been 4 years and im still happy with its location, personally I haven’t had to move it but others might. Thanks for watching
juan ideally you want the grinder on low speed to reduce the possibility of loosing the hardness of the steel, at high speeds the steel will heat up quicker, turn blue and loose its edge, you need to keep the steel cool when sharpening, you can cool with water. take care Rob
Sorry Rob !! but when I watch your vids I have to FF at lest 1-1/2 minutes to get pass the intros [ not just yours ] .. thanks for sharing , usable information ,,.Regards Alf
You made a good investment! Move over to the 120 side when you get all your tools conformed to the system, consider a Robo Rest (see Mike Waldt's review) for the flat rest on the other side when you get flush, and *dress those wheels*. I hear a lota chatter in them right now. ruclips.net/video/c_Zs8p4P1HQ/видео.html Mike Waldt ruclips.net/video/UQ7w6yFhw4c/видео.html Reed Gray www.robohippy.net/store/robo-rest-ow-oneway-compatible All the best, Rob, -- Joe
Joseph I must say I'm pretty excited to have it, I plan on buying the oneway diamond tip dresser soon, it came with a hand held one, and yes I guess they'll be sharper at the 120 grit wheel, thanks and take care Rob
Хобби
Nice update Rob! It's a solid sharpening setup. 👌 Thanks for sharing!
Heath Knuckles
I'm excited to finally have it.
Take care
Rob
Great video, Thanks. I am headed out to setup a new system and this was a good refresher on how to do ir right.
Turning Round
Thanks for watching and your comments, I hope you got yours set up and you're enjoying it as much as I do
Take care
Rob
Great video , just purchased that system yesterday. looking forward to using it for sharper tools . Thanks
PAT
You will love it, the ease of use, repeatable grinds, the results, and the shavings you'll get with a properly sharpened tool, I struggled before I had this set up.
Thanks for watching and commenting
Take care
Rob
Well done thanks for taking the time to show us!
its a great setup with the wolverine jig, i dont know how well id do without it.
thanks for watching
Rob
Very nice video. This was exactly what I was looking for!
billy19461
I hope it helped, I've seen so many how too videos that have helped me so it feels good to give back and hopefully help
Take care
Rob
After seeing this I realize I should have read the instructions. Mine is so wrong. Guess I know what I'll be doing this weekend. Great tutorial.
thanks for watching and you'll love the wolverine system
take care
Rob
Very helpful! Exactly what I was looking for to help with set up!! Thanks -
Just what I needed...I unboxed my wolverine jig yesterday! Thanks for such an easy and informative tutorial.
glad this helped Roger.
thanks for watching
take care
Rob
I bought one yesterday! Thanks for the info👍
You’ll like the easily repeatable grind
Take care
I just got the One Way Wolverine setup and started using it. What a difference it makes. Great video. Thanks.
Thanks for watching and yes its an awesome jig. The CBN wheel too really makes a difference
Thank you very much for exactly what I needed.
Glad it helped
Take care
Rob
Great video Rob. Cheers mate
Thanks for watching
I know this video has been posted awhile ago. But what a find. I have the same grinder and wolverine jig which I just purchased. You made it easy for me😁...thank you. Great video. Sub added.
bobjons7
Glad this video helped, thanks for watching and thanks for the sub
Take care
Rob
Congratulations on you new set up Rob. I bought a knock off of that and the purchased the vari grind. Makes a huge differences
Take care my friend and do a kindness
Mark
it sure does, I could feel the difference in the cutting edge on all of the tools I sharpened in this video, im so happy with this set up
Take care
Rob
Hi Rob, thanks for the info. I purchased a Wolverine Jig and grinder second hand it came assembled and was mounted on a sheet of 1 inch plywood so it could be moved around. It just did not seem correct, and with no instructions I left it alone, I was never quite happy with it . I am heading down to the workshop to make the ajustments. Thanks again.
glad the video helped, I've been wanting this set up for so long, its hard to turn wood if your tools aren't properly sharpened.
Take care
Rob
your video is what I was looking for....... thank you
hope it helped thanks for watching
Rob
awesome instruction. I bought both items for Xmas, actually my wife did..
its a great bit of kit, add the cbn wheel for an even better edge
Welcome sure good looking and ell look advanced version and i hope hopefully you can add for your Diy projects craftsman work Shop.. happy new year wishes
Thankyou for watching
Great tutorial! I'm heading to Lee Valley tomorrow. Lolz
Glen Nicholson
That's where I bought mine from, I just love that store.
Take care
Rob
I'll tell them to throw some commish your way. 😁
Excellent video, thank you!
glad it helped
Nice video Rob. I've been using the wolverine system also and its so easy keeping my tools sharp. I've tried the Yorkshire grit and Hampshire sheen on a few bowls and platters now---wow what a great finish. lol--a little plug for you.
RANDY
It's a great set up, glad that you like the Yorkshire grit and Hampshire sheen. Thanks for the plug. 😉 feel free to head over to my website and leave a comment .
I plan on doing a demo on tiwax soon..
oh and ebonizing..
Take care
Rob.
I epoxied an L-block on my bench ya ... super useful.
Good solid how to video Rob. I have to say that I love the Wolverine, and have used it for about 3 years now, after replacing another system, that became very "sloppy" with use.
Take care
Mike
Mike Waldt
I can see why you are happy with it.
I had no idea what I was missing out on
Cheers
Rob
Good deal. I've had mine quite a few years. I would suggest that every now and then your check the angle your getting on the gouges. Not sure why, but mine seemed to get steeper as time when along. Only takes a second to get them back to the 40, 50 or what ever degree you want. (the settings that is) Enjoy.
Michael Hunter
Absolutely, the problem with aluminum oxide wheels is, they wear down and you have to dress them, that will cause this over time, a cbn wheel is on my wish list.
Take care
Rob
Well done sir! Thank you for sharing your time and talent!
Thanks for watching, I recently upgraded to CBN wheels also
Hey pal great video. Whats the song at the end?
Great video! I'd like to point out that when I've seen people do the sharpie trick they don't turn on the grinder but instead rotate the wheel by hand
thanks for watching, ive not seen that, i just touch the wheel as it spins, you really don't loose a significant amount of steel by doing that, but that tip may help someone.
take care
ROB
What is the size of the "V arm"which slides in and out the base for the jig? Its square tube set on its side, is it 1" tube or smaller or bigger than one inch. I figger the bar length is around 25" inches long. Why do I ask? Wood turning was second on my bucket list. Welding was first. I have fabricated my own wolverine jig, works fine. I am currently making other attachments. Right now I am making the veri grind jig. I would send pictures but no idea how to do that on youtube.
Nice video sir 👍
Thanks for watching
Hi Rob... I am in the process of setting up my Wolverine with the regular Vari-grind. Doesn't look like you took the rubber feet off your grinder. My instructions suggest doing that as it's possible for the feet to collapse after time. I took mine off and put them on the bottom of the board the setup is sitting on.
i must have missed that but i can see that would be very possible.
thanks for your comment
cheers
Rob
What would be the difference between having the rubber feet on the bottom of the grinder or on the bottom of the board the grinder is mounted on? The rubber feet would have the same weight and maybe compress over time. I have the same grinder and just built a stand for it today, next I guess I'll order the wolverine system as well, I'll get the wolverine jig with the platform and bases first as I won't be doing bowels for awhile so won't need the Vari Grind for a little while.
Great video, I have a question. I just purchased the Wolverine system and I'm ready to set it up. My question is, since the arms adjust front to back, why is it necessary to align the front of the base with the front of the wheel? It seems that all I need to be concerned with is that the horizontal alignment is correct?
hi
thanks for watching,read the instructions it will tell you to do this.
take care
Rob
enjoy your wolverine jig, it works great
I’m looking at a low speed grinder. How has the king been standing up? I’m installing a Wolverine jig this week and your video was informative.
Hi Ed
Thanks for watching and glad it helped some.
I have no complaints with the king grinder at all, had no problems with it so I recommend it
Take care
Rob
Kind Sir 🙇♂️
In my humble opinion as a Oneway dealer for 32 years the grinder should never be bolted to a wooden surface. Any inherent vibration in the grinder is transmitted to the board and magnified. The rubber grommets that come with the grinder should be placed under the spacer needed to raise the center measurement to the required height per the instructions. If the grinder does have significant vibration a balancing kit is available from Oneway to mitigate the vibration. When balanced a penny should be able to be placed on the grinder when running at full speed without falling off. The installation of a second platform is not required as the one included with the jig is more robust and easily moves from side to side. You should try to grind at roughly the same height as you turn.
The rubber grommets are still under the grinder this eliminating vibration to an extent, it has now been several years and im very happy still with the resulting grind/ edge that this setup gives my gouges.
Nice video, thanks! Setting mine up today. Couple of questions though - Doesn't the changing length of the tool (as it gets repeatedly sharpened) negate the usefulness of marking the bar? Also isn't the 2" measurement dependent on the angle of the grind? It seems to me there is an infinite combinations of bar setting and exposed tool length that would give the same angle.
Hi
Yes the angle will slowly change due to the aluminum oxide wheel wearing down, that is the reason I replaced it with a CBN wheel, well worth the money, and you get a much better and sharper grind.
You’ll enjoy using it. The 2” is standard watch other videos for others input 👍
Thanks for watching
Rob
Woodslee Summercraft I was more concerned with the length of the tool. Thanks for the reply
Hi great vid. ,,,, question what grade or type is that grinding wheel ?
Hi the grinder cane with 180/320 grit aluminum oxide wheels, I have since changed to CBN wheels and what a difference, costly but worth the expense in my opinion.
Love the video and the jig
Do you have the link for the jig?
Thanks
www.leevalley.com/en-ca/shop/tools/sharpening/jigs-mounts-and-rests/52372-wolverine-basic-sharpening-jig?item=66B0440
How many times did it take to sharpen that skew?
James Kephart
A few, it was in rough shape until I got this set up
Hey Rob! Thank you for this video. I have a question though. At 4:24 you mention that 'the grinder is flush with the front face of the bench' but at 4:56 you say 'the front edge of the base needs to be flush with the front edge of the grinding wheel'' ( hence the 1/4 of an inch gap bw the front of the bench & the wheel). Please help me sort this out !
I just purchased the same grinder and the Wolverine. I see the video was posted 5 years ago. Is there anything you'd do differently if you were setting it up today?
Hi Jim, its still essentially set up the same although i did move it over to the side of the bench so my drill press can share the same bench, space is limited, main important thing is that you have room to swing the tool from left to right, i put wheels on this bench so i can move it around if needed.
@@WoodsleeSummercraftwoodturning thanks for the tips.
@@jimhyslop also highly recommend the 80 grit CBN wheel, its steel with diamonds so it doesn’t wear down, your grind is more easily repeatable and the cutting edge you achieve is superior imo
@@WoodsleeSummercraftwoodturning CBN wheels are in the wish list. Saving my pennies...
Now, if you want to take things to a higher level make the leap to the CBN grinding wheels. This will mean that you will never have to adjust the jig due to the stones changing in diameter due to wheel dressing. I love the Wolverine grinding jig!
James Stanlake
It's on the list.
Thanks for watching
Take care
Rob
Found you video - nicely done. I bought a lathe recently and have a set of 1950ish "Marple" made in England turning tools my Dad gave me - they were my grandpa's. Looking into sharpening options. In Canada that King 1/2 hp slow speed grinder is the lowest cost option for slow speed grinders - Rikon has a 1/2 hp for about 50% more than the King - and Busy Bee has a full horse unit for $100 more than the King. Rikon full horse model is more than twice the price of the King. Amazon sells a Wen but not keen on amazon tools. Has that King worked out for you over the past five years since you made this video? Any regrets on not getting a full horse model? I'm leaning towards the Wolverine Jig but looking at a few other similar options. Wolverine seems to be the most popular by far and only a little more than the others. I did watch a more recent video of your shop tour - and noticed the King grinder is still in service - with a CBN wheel. Is the 1/2hr adequate for that wheel - I've seen comments that it can't manage an 8" CBN. Not that I have a CBN but maybe when those original whites ware out I'd get one too. I'm in Alberta otherwise I'd stop in and see that fine set up.
Hi David
Thanks for watching, im still using the king grinder with the 80 grit CBN wheel and the Wolverine jig, with no regrets at all.
@@WoodsleeSummercraftwoodturning Perfect - will likely pick one up soon - ordered the Wolverine Jig . Debated on the Craftex 1 HP for $100 more but could put that $100 towards a CBN wheel. I understand that it is OK to run one CBN wheel and the other side use an aluminum oxide grinding wheel.
@@DavidBealeakaFKD i dont use the other wheel at all to be honest
The cbn does it all for me, im only touching up tools with it but it gives a great edge, superior to the aluminum oxide wheel
@@WoodsleeSummercraftwoodturning Did get the King 1/2HP Also picked up a Lee Valley CBN wheel (180) and left the 120 on the other side. The outside shield will not fit over the CBN wheel so will need to be careful. I thought I could post a picture in a reply on RUclips but don't see that as an option.
@@DavidBealeakaFKD ive been using my king regularly and its still going strong, the side does have to be removed to accommodate the CBN, i havent had any issue with that. Check out my website for woodturning finishes etc www.woodsleesummercraft.ca
Looks like a great set up . But I bet it's not cheap .
Glen mckelvey
It cost a fair bit, but it's so worth it.
Cheers
Rob
The problem with scoring your bar, is after a few grinds of your tool ... to sharpen it, you are taking away material and in-essence shortening your gouge. That means the angle ... +length will be off by that much. The score will be off.
pinkeye00
Yep I soon realized this, so CBN wheels is the way to go 🙂
Mount whole system to a piece of 3/4 ply screw ply down to workbench. If you ever need to move the system unscrew ply with system move to new location re screw down. One time deal
You can do that too, no big deal, its been 4 years and im still happy with its location, personally I haven’t had to move it but others might.
Thanks for watching
That works as long as your distance from the 3/4 plywood is the correct distance to the center of the grinding wheel.
Is it mandatory to have a low speed grinder ?
juan
ideally you want the grinder on low speed to reduce the possibility of loosing the hardness of the steel, at high speeds the steel will heat up quicker, turn blue and loose its edge, you need to keep the steel cool when sharpening, you can cool with water.
take care
Rob
Sorry Rob !! but when I watch your vids I have to FF at lest 1-1/2 minutes to get pass the intros [ not just yours ] .. thanks for sharing , usable information ,,.Regards Alf
I hear you, i have since shortened my intro on all of my new videos, i hope that you continue to watch,thanks for watching
take care
Rob
You made a good investment!
Move over to the 120 side when you get all your tools conformed to the system, consider a Robo Rest (see Mike Waldt's review) for the flat rest on the other side when you get flush, and *dress those wheels*. I hear a lota chatter in them right now.
ruclips.net/video/c_Zs8p4P1HQ/видео.html Mike Waldt
ruclips.net/video/UQ7w6yFhw4c/видео.html Reed Gray
www.robohippy.net/store/robo-rest-ow-oneway-compatible
All the best, Rob,
-- Joe
Joseph
I must say I'm pretty excited to have it, I plan on buying the oneway diamond tip dresser soon, it came with a hand held one, and yes I guess they'll be sharper at the 120 grit wheel, thanks and take care
Rob
I added some links on my previous comment to Mike's review, Reed's demonstration, and Reed's store.
See ya,
-- Joe
Ü
Alberto Castrillon V.
Nice smile
Thanks
And the one thing I needed, you skipped over.....assembling the work platform!!
How to attach the tightening arm? I'll have to go elsewhere.....
i hope you figured it out, sorry, it was easy enough
I was going to watch this video but after the 30 boring seconds of the opening l will go to another video that is to the point
Ok sounds like you missed out
Cheers troll
I bought plans from woodprix and I made it very fast.