It’s only a spreadsheet......I wouldn’t mess on too much unless I kinda knew what I was doing. Need to work out how to get the 2 step to work as well at some point.
“People like it, and I’ve no idea why” You took the words right out of my mouth there! Don’t know why anyone thinks pops and bangs are cool. There only cool if you’re in macdonalds car park and you’re a spotty teenager wearing a baseball cap back to front. 😂
I just want my Civic to bang and pop with lunch control that's it. It's a nice party piece, Plus if anyone is driving to close behind you can let them know at the lights to back the F off
😂😂😂 why anyone would want to make it sound like a fiesta is beyond me, better going to buy one 😂😂😂 Good video though what the kpro can do. Glad your putting it back to Honda map 😎
Quick question I’ve taken off my 421 and now have a tegiwa Cat on.. any ideas how to get rid of the pops and bangs don’t wanna damage the cat I’ve got a KPro v4 like yours?
Me again! Did you the vtec operating rpm dropped when you had it mapped? Any idea why hondata don't plug in the input/output cables and pass them through a grommet in the ECU so you can use them without voiding your warranty? Seems strange to me🤔
yeah its dropped to 5200, probably should have gone lower with it really, may alter it although it won't be n/a for much longer. Not sure why they don't have the digital and analogue plugs fitted, seems a bit strange. I have emailed hondata but haven't had a response about the warranty,
Have you heard this before ruclips.net/video/jnj7q8jYdNo/видео.html Having trouble with my ep3.the car works fine etc no issues just when I put key in and turn it to on position,the one before start it makes the noise.sometimes it don’t do it or if it does say I knock into car it will stop then come back.around fuse box battery area
When you planning of restoring the rusty areas, im currently saving to put mine into a dexent Body Shop then I think im guna try push as much power through NA mods
Shaan Rai I think it’s due an mot in September so I will see how it does with that first. Will be making some enquiries on prices to fix it, see if it’s worth paying for it or trying to do it ourselves.
great vid wish i had the balls to mess around with my ecu. If i did it, it wouldn’t sound like fiesta but it would be as slow as one.
It’s only a spreadsheet......I wouldn’t mess on too much unless I kinda knew what I was doing. Need to work out how to get the 2 step to work as well at some point.
Great video thank you i want this on my ep3 but im doing a switch so i can only have it when i want a laugh
Yes I need to look at adding a clutch switch in so I can do flat shifting as well. Haven’t worked out how to do it yet.
“People like it, and I’ve no idea why”
You took the words right out of my mouth there! Don’t know why anyone thinks pops and bangs are cool. There only cool if you’re in macdonalds car park and you’re a spotty teenager wearing a baseball cap back to front. 😂
Took the words right outta my mouth. Engine builders everywhere are shaking their heads.
I just want my Civic to bang and pop with lunch control that's it. It's a nice party piece, Plus if anyone is driving to close behind you can let them know at the lights to back the F off
Nobody can drive close to a civic as no car is as fast as an ep3 😎
Launch control rpm limiter:6100
Fuel and ignition retard:6000
Fuel enrichment:750
Retard ignition:60
😂😂😂 why anyone would want to make it sound like a fiesta is beyond me, better going to buy one 😂😂😂
Good video though what the kpro can do. Glad your putting it back to Honda map 😎
Need to work out how to make it work with a boost solenoid shortly. Seems decent stuff for plug and play anyway.
That was entertaining dude.
Lol. “I want it to pop and bang!” Unhook an ignition coil. 🤣
I must be weird because I like pops and bangs
It ain’t for me 😂
Quick question I’ve taken off my 421 and now have a tegiwa Cat on.. any ideas how to get rid of the pops and bangs don’t wanna damage the cat I’ve got a KPro v4 like yours?
It depends how they have done the pops and bangs really. You may need to take it back to where it was done at.
Me again! Did you the vtec operating rpm dropped when you had it mapped? Any idea why hondata don't plug in the input/output cables and pass them through a grommet in the ECU so you can use them without voiding your warranty? Seems strange to me🤔
yeah its dropped to 5200, probably should have gone lower with it really, may alter it although it won't be n/a for much longer. Not sure why they don't have the digital and analogue plugs fitted, seems a bit strange. I have emailed hondata but haven't had a response about the warranty,
Hi. Who did your kpro and original mapping? Or was it on base map? Thx
Got it from tegiwa, mapped at Jdm dyno kirkbride.
How do I get mine to pop and bang it’s standard with a aftermarket exhaust, typhoon k&n
Not entirely sure you can without it having a mappable ecu but I am not 100% on that. There might be a way
Mine is sports cat, M2 back box and typhoon and it’s pops at about 3/4K when I let off the throttle
What program do you have on your laptop and how do I get it?
K manager from hondata on their website
What exhaust
Solid fabrications 3” system
Are you nic Barnes 👀👀 😏
😱
Have you heard this before ruclips.net/video/jnj7q8jYdNo/видео.html
Having trouble with my ep3.the car works fine etc no issues just when I put key in and turn it to on position,the one before start it makes the noise.sometimes it don’t do it or if it does say I knock into car it will stop then come back.around fuse box battery area
Terry85 T some sort of relay going mental? Very loud though
@@1BlueGhost turned out to be headlight motor
Awesome glad it’s sorted! Sounded wild!!!!
How she running whats next
Running pretty good! Turbo is likely to be next in a month or so
When you planning of restoring the rusty areas, im currently saving to put mine into a dexent Body Shop then I think im guna try push as much power through NA mods
Shaan Rai I think it’s due an mot in September so I will see how it does with that first. Will be making some enquiries on prices to fix it, see if it’s worth paying for it or trying to do it ourselves.
😂
LMAO 🤦🏻♂️