2 momths ago I was surfing on RUclips and came across your channel. Since then u have never disappointed me with any of your projects. "By the way I'm from India". U inspired me to learn more about 3d printing. My dad met an accident on 8 June. I lost my dad on 14 June 18. I had totally lost my track. . I've started learning programs Fusion 360, SketchUp, Maya 3d animation n so on. I just want to thank u for giving me a new direction to learn new things. Keep up with your work 🤗 🤗
I will be trying my own 3D printed lure soon. I was surprised to see you like Fishing. I found your channel a while back for my 3D print projects. When you feel the strike, maybe set the hook more, that will drive it in and hold better.
Looks like Construction Foam for insulating concrete floors. Basically 300mm thick stacked twice with a wooden frame around. EDIT; On another angle, I suspect there might be more than that.
I'm going to mirror another comment on here and say how impressed I am with all of your videos. I truly enjoy watching everything you produce. Welcome to the world of fishing. It's 90% frustration just waiting on that 10% of pure joy!
Love the video!!! I think you would have a lot more luck if you were "setting the hook" so when you initially get a fish on most of the time it is just the lure going in to the fishes mouth or the initial bite, but to get the hook to set into their mouth you need to give the rod a good pull upwards. So when you feel the rod move, say it moves to the right, then grab the rod and pull it hard to the left (opposite direction) and this will set the hook into the fishes mouth. I think you will have better luck with actually getting the fish on. Much love man!
For a pike you have to give him some time, because they grab the fish by the back and then they go down in the deep to swallow them. So you have to give them some time.
The scenery reminds me so much of where I grew up, in western Washington state in the US. My grandpa Einer was from Norway and I can see why he liked it here so much. Nice Helly Hanson life jacket too! Thanks for the video.
Well done Buddy, would love to see more stuff like this, maybe print some rod holders. Please please make yourself a waterproof case for that DSLR. Or even a fixed mounting place for your tripod so it don't accidentally take a plunge.
Would be cool to design a mold where you could inject a rubbery plastic. Would also be cool because you could add your hooks before injecting and have them linked through the bait with fishing line. This way if a fish really got after it, it couldn't rip out a hook. I've been dreaming on molding my own baits but i want to make something biodegradable. I hate the thought of tossing more plastic in the water that'll never go away.
There are companies that make biodegradable soft plastics. You can also switch out your lead weights with tungsten, or even make your own out of stones.
🐟Nice!! I make my own lures some times also...make that same swim bait with a chartreuse yellowish green day glow tail and one with a white tail and try em out! I would also do a day glow orange tail and also make the whole lure in chartreuse color and in day glow orange and try those out also! I bet the pikes would hammer em then!
Very nice! Just a tip, most hooks aren’t very sharp from the factory. If you give them a little attention on a hone, you could increase your hookups. Got to try these baits on my printer. 👍🏻
Hi, Great channel & love your work... Just a tip the reason why you are loosing fish is because you do not set the hook properly. When you get a bite you have to strike hard on the rod to set the hook. Strike = hard yank backwards on rod. Hope this helps. Good luck and keep up the good work.
My misses family live on the French/Swiss border and I think that is a beautiful part of the world. Where you live is just breathtaking. Another excellent video and some beautiful looking Perch and Pike you caught there. Well done
Dude, you’re a master of b-footage. Beautiful videos and it’s clear you understand the true nature of fishing. Positive attitude, relaxation and admiration of a clean catch. Well done all around!
man! I never thought about 3D printing fishing tackle! that is AWESOME! pike are hard to get a good hook set on either way. i have watched a lot of your RC car videos somehow i never saw this one until today. very cool!
You most definitely need better/sharper hooks I think. Hooks and the sharpness of them are a very under rated part of lures and fishing. Pike have hard mouths so they need the hook set good and sticky sharp hooks. Just a suggestion, they could have just not bitten the lure in the best way, but it looked to me like the hooks could be part of the issue.
I'd hate to see you lose a rod, or even that DSLR. Set up some rod holders and camera mounts. Anchor down a crate or 2 as well. Keep up the good work. Your content is the reason why I've made my first 3D printer purchase. :)
oh my gosh! you are my favorite RUclipsr. I'm Sam . and come from Taiwan. Also in my Taiwanese Laboratory project is produce 3D Printing Robot Fish .So glad can seen this video related my project. It's Fantastic ! Please do more related this project Video. And I think we can exchange for the idea . It's amazing ! Hope you have a nice day! Sam(Hsieh,Chang-Hsuan)
If your making a part two, I think it would be helpful to make the lures more shiny and reflective, maybe some metallic paint would work, you have to catch the attention of the fish 👍
you should get some PVC pipe and make some rod holders at an angle or even just flat.I used to do the same thing onm my kayak(holding them with my feet) and the i put some pvc pipe on them and it helped out a lot.You dont have to worry about your rods falling in.
You're losing the fish because you have to set the hook. Once you feel the fish on, grab your rod and yank it back above and to left or right of your head depending on which way you're comfortable doing it and you should be able to reel it in with no problems, unless your line brakes that is. Another GREAT video!! 👍👍
I dont know about fishing but would it be a factor if the tail was very bright, neon color and a bit smaller over all? thanks. I really love the the scerry part of your videos. They are amaszing.
Lost a lot of bass myself, smart fish, the nearest lake to me is 2 hours away :( i'm jealous. But i'm sure they will work in salt water if i print them bigger. Thank you for always releasing great content.
Simon wow i love the way you make your videos you inspire me a lot to make stuff on a 3D printer i make rick sanchez and Baby Groot i hope i can meet you at meet and greets thanks for inspiring me so much happy printing greetings
Hi Simon. And now I'm interested about that dual extruder :) Could you show us in future how it works, some details etc , please? What about Pallete + which you have bought some time ago? Any success or rather avalanche of failures?
"Där satt den" = GOT ONE
For you non-Swedish speaking viewers. 👍
Nice dude 😁
RCLifeOn hey I know you said not to comment but the only thing you were doing wrong is on the pike you did not set your hook
Thought you were saying "There's somethin" 😂
Vad tror du om guld tuben?
I thought it was a 4-letter word...
OH MY GOD! You made a video about my swimbait! Thats so awesome!
It's a great design, nicely done!
Thanks alot!
Nice work dude! Just might be what pushes me over the edge to finally getting myself a 3d printer!
@@Binaryfarto You can order a 3d printed part from companies rather than buying a printer unless you fish often and lose a lot of lures.
@@pjanoo6973 Where?? SHOW MEEEEE need more jerkbaits
2 momths ago I was surfing on RUclips and came across your channel. Since then u have never disappointed me with any of your projects. "By the way I'm from India". U inspired me to learn more about 3d printing. My dad met an accident on 8 June. I lost my dad on 14 June 18. I had totally lost my track. . I've started learning programs Fusion 360, SketchUp, Maya 3d animation n so on. I just want to thank u for giving me a new direction to learn new things. Keep up with your work 🤗 🤗
When the fish bites you need to pull back on the rod and “set the hook” I think that would help you land more fish 🎣
That and also id recommend keeping the rod tip down to avoid any jumping
@@OfficialZurg Actually loosen up a little when they jump. Too much line pressure pops the hook.
I will be trying my own 3D printed lure soon. I was surprised to see you like Fishing. I found your channel a while back for my 3D print projects. When you feel the strike, maybe set the hook more, that will drive it in and hold better.
Hey andy didnt know id see u on here haha. Thinking about printing some as well
Dude, your drone footage of your stunning country always has the wow factor. Spectacular!
I wanna know more about this boat that you've made . Looks interesting .
ME TOO
ME TOOO
ME TOO
Looks like Construction Foam for insulating concrete floors. Basically 300mm thick stacked twice with a wooden frame around.
EDIT; On another angle, I suspect there might be more than that.
It's a Viking Secret.
3D print a Rod holder Please!!!
That was my thought to make a pole holder.
That’s the same I thought. Maybe one that has a small bell attached to it.
I like these lures. They look like real fish swimming under water.
I'm going to mirror another comment on here and say how impressed I am with all of your videos. I truly enjoy watching everything you produce.
Welcome to the world of fishing. It's 90% frustration just waiting on that 10% of pure joy!
Dude! That is so f'n cool! I'm so impressed!
Well done to you and to the designer of that swimbait!
Love the video!!! I think you would have a lot more luck if you were "setting the hook" so when you initially get a fish on most of the time it is just the lure going in to the fishes mouth or the initial bite, but to get the hook to set into their mouth you need to give the rod a good pull upwards. So when you feel the rod move, say it moves to the right, then grab the rod and pull it hard to the left (opposite direction) and this will set the hook into the fishes mouth. I think you will have better luck with actually getting the fish on. Much love man!
For a pike you have to give him some time, because they grab the fish by the back and then they go down in the deep to swallow them. So you have to give them some time.
Swedish Nature loving is not a myth. Congrats to both fishes who played their roles so well.
The scenery reminds me so much of where I grew up, in western Washington state in the US. My grandpa Einer was from Norway and I can see why he liked it here so much. Nice Helly Hanson life jacket too! Thanks for the video.
Well done Buddy, would love to see more stuff like this, maybe print some rod holders.
Please please make yourself a waterproof case for that DSLR.
Or even a fixed mounting place for your tripod so it don't accidentally take a plunge.
Next on the printing list ! fishing rod holders lol
4:06 „We have o-fish-ially started“ 😂
Would be cool to design a mold where you could inject a rubbery plastic. Would also be cool because you could add your hooks before injecting and have them linked through the bait with fishing line. This way if a fish really got after it, it couldn't rip out a hook. I've been dreaming on molding my own baits but i want to make something biodegradable. I hate the thought of tossing more plastic in the water that'll never go away.
There are companies that make biodegradable soft plastics. You can also switch out your lead weights with tungsten, or even make your own out of stones.
3D printing and fishing! 10/10 absolutely brilliant!
Your videos got me into 3D printing and it is really inspiring that you push the boundaries of 3D printing
🐟Nice!! I make my own lures some times also...make that same swim bait with a chartreuse yellowish green day glow tail and one with a white tail and try em out! I would also do a day glow orange tail and also make the whole lure in chartreuse color and in day glow orange and try those out also! I bet the pikes would hammer em then!
Beautiful land. Good job Simon.
These things swim really nice, super realisitic! Added to my list.
Very nice! Just a tip, most hooks aren’t very sharp from the factory. If you give them a little attention on a hone, you could increase your hookups. Got to try these baits on my printer. 👍🏻
Hi, Great channel & love your work... Just a tip the reason why you are loosing fish is because you do not set the hook properly. When you get a bite you have to strike hard on the rod to set the hook. Strike = hard yank backwards on rod. Hope this helps. Good luck and keep up the good work.
My misses family live on the French/Swiss border and I think that is a beautiful part of the world. Where you live is just breathtaking. Another excellent video and some beautiful looking Perch and Pike you caught there. Well done
You bring such joy in the world by your activities. Thank you so much for sharing it!
Dude, you’re a master of b-footage. Beautiful videos and it’s clear you understand the true nature of fishing. Positive attitude, relaxation and admiration of a clean catch. Well done all around!
man! I never thought about 3D printing fishing tackle! that is AWESOME! pike are hard to get a good hook set on either way. i have watched a lot of your RC car videos somehow i never saw this one until today. very cool!
Please keep doing these
I really enjoy your channel , I love that you take us outside the shop when you try out your creations, you're a very inspiring young man
Nice. Surprising durability of those printed lures. Great job!
You most definitely need better/sharper hooks I think.
Hooks and the sharpness of them are a very under rated part of lures and fishing.
Pike have hard mouths so they need the hook set good and sticky sharp hooks. Just a suggestion, they could have just not bitten the lure in the best way, but it looked to me like the hooks could be part of the issue.
Make a RC submarine!
Please make more videos cuz i love ur vids .
If you're a good enough angler to hook a pike, you are good enough in my book.
I'd hate to see you lose a rod, or even that DSLR. Set up some rod holders and camera mounts. Anchor down a crate or 2 as well. Keep up the good work. Your content is the reason why I've made my first 3D printer purchase. :)
Right when you get a bite pull the line really quick with a jolt to set the hook in its mouth then reel
subbed; I have been watching your videos, but id love to see a part two of this one!
Very well swimming lure.
I always look forward to watch your Videos!
This is Quality Content!
everything is bait! love this idea!!!, and oh man, those dual color prints!!!!!
Bro using that Ugky stik that’s awesome I have 2 GX2’s and 1 Elite all medium action 2 piece rods freaking killer
I'm happy I found your channel
oh my gosh! you are my favorite RUclipsr. I'm Sam . and come from Taiwan. Also in my Taiwanese Laboratory project is produce 3D Printing Robot Fish .So glad can seen this video related my project. It's Fantastic ! Please do more related this project Video. And I think we can exchange for the idea . It's amazing ! Hope you have a nice day! Sam(Hsieh,Chang-Hsuan)
Nice tour👍😀
Thanks for sharing👍😀
If your making a part two, I think it would be helpful to make the lures more shiny and reflective, maybe some metallic paint would work, you have to catch the attention of the fish 👍
very nice!! you got some good big ones there! (better than i could ever do with a worm)
you should get some PVC pipe and make some rod holders at an angle or even just flat.I used to do the same thing onm my kayak(holding them with my feet) and the i put some pvc pipe on them and it helped out a lot.You dont have to worry about your rods falling in.
Amazing brother
Nicely done sir! This is right up my alley!
You're losing the fish because you have to set the hook. Once you feel the fish on, grab your rod and yank it back above and to left or right of your head depending on which way you're comfortable doing it and you should be able to reel it in with no problems, unless your line brakes that is. Another GREAT video!! 👍👍
Hey, cool lure. Add bigger treble hooks. the hooks should be able to touch each other on any crankbait or swimbait. :) better luck next time.
one you feel a bite pull directly up to set the the treble hook.
awesome, I will give it a go. Thanks
Nice video!! You should try larger hooks, looks a bit small for a pike.
You would land more if you had printed it a wee smaller.
To stop them from falling off when they jump, keep the rod more straight in the vertical.
Tack för att du släppte tillbaka dem. Då kan du fånga en till gång senare och andra orsaker.
nice video.
and heres a Tip. remeber to strike (pull hard back) when your fighting pike. there many teeth in there mouth makes it hard to hook it. ;)
Beautiful place
Good to have you back
Ah man, I love to fish as well, I fly fish and make my own flies! Cool vid!
very beautiful place !!!
The inspiring content keeps rolling, absolutely brilliant, keep it up
I dont know about fishing but would it be a factor if the tail was very bright, neon color and a bit smaller over all? thanks. I really love the the scerry part of your videos. They are amaszing.
I'd be worried about that DSLR going over the side. Nice lures though.
Dude I love your videos. They are so creative and inspire me to makes stuff. Also the humor is incredible. But here’s a tip: buy an ND filter.
You should try to yank it to get the hook hooked, you need to do it at the right time or you will loose them.
just keep your rod tip down and keep line tension. nice catch. keep the great vids rolling. : ]
Oh Man, what a lovely place, no wonder you always have a great idea for your content
HAHAHA nice helicopter 😂👌
fish with the drone , nice video btw
Give this guy a thumbs up,
Can your RC bout pull your raft? You'll have a fast raft then. That would be awesome :D Very cool video, like always bro.
I think a two sizes bigger trebles on those swim bairs and you'd probably land them
Lost a lot of bass myself, smart fish, the nearest lake to me is 2 hours away :( i'm jealous. But i'm sure they will work in salt water if i print them bigger. Thank you for always releasing great content.
Excellent video
Print some rod holders, that would make trolling a lot easier and great video man!
Great video, please do more videos of projects that you build something mechanical or electrical.
Simon wow i love the way you make your videos you inspire me a lot to make stuff on a 3D printer i make rick sanchez and Baby Groot i hope i can meet you at meet and greets thanks for inspiring me so much happy printing
greetings
Fresh trim
Make an rc boat that will carry your line out and then release it!!! You're awesome btw
Keep up the good work, you are doing an amazing job.
Cool lure, but u should put rod holder's on ur boat, ur will fly off , if u get a big fish
A slightly bigger hook may help,... the hooks look a little too small for that size lure and limiting the size of fish you can land.
Please make video how to make any 3d printer quiet an build soundproof enclousure
This video saved me from boredom 😁
Hi Simon. And now I'm interested about that dual extruder :) Could you show us in future how it works, some details etc , please? What about Pallete + which you have bought some time ago? Any success or rather avalanche of failures?
Mabye you should make a 3d printed fishing rod stand with an alarm when you catch a fich
Great work, dude! 😃
Dude, set the hook!!!!! RUclips it!!!! Your better at 3D printing than fishing. :)
Cool videos
yes a new video
Svenskar är alltid bra på att fiska
It’s god dam beautiful where you live! No wonder you’re so happy 👍🏻
In Russia this pike's jump called "candle" and it's a cheat-like trick...
Great Video i would love to see more videos like this well done!!
8:03... Wow.. that's a whopper... about the size of the lure...
You gotta set the hook when the fish bites. Just pull hard.