You can adjust the height and then is laser 5cm above the bed.. i try with wood and it works amazing.. you just need to ajdust the intensity ( % ) of laser..
Hi everyone, I have an Anycubic mega S, I'd like to buy, install and use the laser engraving. Is it that possible? Is it enough to change the firmware and is it available to download? Second question in case i can set up my 3d printer to laser engrave. I've installed a different firmware from the original which allowed me to do a manual auto- levelling. Is there any way I can save the set up before to replace the firmware in order to be able in the future to reinstall the actual firmer with the actual commands? Thanks.
I can not find any information on the internet about usig the anycubic laser to engrave on painted brass name tags, using the laser to remove the painted and expose the copper below. do you have any experience. I have written to anycubic and they have replied but not to my question, they asked where i live sent lnk to web site to purschase
The laser is also only connected with 2 cables, and I'm pretty sure that there is a frequency going through to turn the laser on and off, but the fan shouldn't always go on and off, shouldn't it? But it is still a very good printer, it has a good quality and works very well
![mgk - Sun to Me (Zach Bryan Cover) [Live from Cheshire Cottage]](http://i.ytimg.com/vi/_ZnbTEs4O6U/mqdefault.jpg)
Awesome!
I'm getting this 3d printer soon, i'm getting 1 kilogram of Pla (in random) it's already on its way. I'm very excited
Did yoi recieve it?
I have a similar model of this printer.It came with the laser module i didnt realize it could do this as well.
Very nice bhai.
I just bought the anycubic Pro with this laser I'm REALLLYYYYY exited
Good luck !
@@Drxxx ty :)
Mi maquina no se mueve así. No he podido hecharle andar. Algún tip?? Lo agradeceré de corazón.
Can you engrave on wood boxes? Height would change. Is laser aimed at bed or can it be adjusted?
You can adjust the height and then is laser 5cm above the bed.. i try with wood and it works amazing.. you just need to ajdust the intensity ( % ) of laser..
Hi everyone,
I have an Anycubic mega S,
I'd like to buy, install and use the laser engraving. Is it that possible? Is it enough to change the firmware and is it available to download?
Second question in case i can set up my 3d printer to laser engrave.
I've installed a different firmware from the original which allowed me to do a manual auto- levelling. Is there any way I can save the set up before to replace the firmware in order to be able in the future to reinstall the actual firmer with the actual commands?
Thanks.
hi, thanks for making this video :) did you try engraving on 3d printed objects? (pla) :)
Hi, no..
I can’t get my laser to move up with the laser height option do you know how to engrave on a higher level?
You can adjust it.. Z height
nice
Thank you!
I can not find any information on the internet about usig the anycubic laser to engrave on painted brass name tags, using the laser to remove the painted and expose the copper below. do you have any experience. I have written to anycubic and they have replied but not to my question, they asked where i live sent lnk to web site to purschase
Any luck?
can u upgrade the laser on it? like installing neje 30w laser module?
With mosfet i think yes.. only connection between printer and laser are + and - wire.
Can you make a tutorial on how to get it to engrave a picture setting up the files bmp
I made.. it is on the my last video!
This looks like the same connections on my i3 mega would this work on my printer if I update the software ?
It should... you disconnect connector of extruder and connect from laser..
Did you manage it?
The fan isnt blowing on the laser,🤔 can somebody help me. But a great 3d printer👍
Is he connected properly??
yes, maybe it is a temperature sensor and the fan turns on after a while? Does the fan go on with you?
The laser is also only connected with 2 cables, and I'm pretty sure that there is a frequency going through to turn the laser on and off, but the fan shouldn't always go on and off, shouldn't it? But it is still a very good printer, it has a good quality and works very well
@@dreck66666 i think that he recieve PWM signal same as the laser, but can be that he have a capacitor.. did you recieve voltage on the fan?
@@Drxxx it works now, it was just a little to low power, to run the fan 👍 probably a capacitor that drives the fan
Do you need to were laser glasses
Sure! It can be very dangerous!