I'm impressed! My usb port broke recently due to water damage, I'm able to replace it for 13 euro, 13 euro!! Some people would buy a new phone after something like this
Hi yes, it has water/dust resistant type adhesive on the back which I would assume would protect the phone from casual slashes or dust but nothing really major as far as rubber gaskets around connectors and so forth. Thanks :)
@@PBKreviews Also, have you heard anything about the green tint on screen bug on the Samsung displays when it's at 5~15% brightness? I've seen a lot of people reporting this issue recently and has made me consider if I should get one or not.
@@mateuscampello ive used the phone for a month now, and the brightness was mostly below 20%, i didnt encounter any greent tint issues on my phone, but i think those tint issues mostly happens on samsung flagships ???
Did you notice anything to indicate that it would resist a bit of water? Like any rubber, etc etc. Not asking if it would resist being submerged, but just splashes etc etc. Great video btw.
Thanks, It does have strong adhesive on the back plate and a few rubber gaskets on the charger port board but none on the main board. I would say it should hold up to some splash but I wouldn't dunk it in water.
@@yanikebrown-young4397 I'm not going to waste my life watching a phone that's not water resistant be submerged, in about a month it'll die all the way. Fr.
This man rite here is a legend or this video. Haft way tho as only my volume up stuck in (plus made I worst 😅) but good video mate thanks alot. Lol next it's the switch charge port replacement if ya got a video for that aswell lol be a diamond if did pmsfl
My phone was dropped into a small puddle where the USB c port is. All is fine except the constant message # USB connector connected and disconnected, continuously pops up. No screen going to sleep and draining the battery. From this video I take it needs a new charge port board. Where can I purchase these please. Any help appreciated 🙏 and great video
Hi, the onboard storage is soldered onto the motherboard and you would not be able to take it off to move it to another phone. Requires expert soldering skills etc.
Nowadays i'm thinking to buy this s10 lite. But, i compare this device with ip11, ip12 and 12 mini. Do you have any recommendation to me? Note: OS doesn't matter.
I honestly don't like iphone's at all. They may feel nice but the software and apps annoy me a lot and is very locked down so I personally would not use an iPhone.
I have a non working one needing probably a motherboard. Can you tell me what the top cover is called as mine got damaged during disassembly, also what is the electronic component inside of this?
Hi,may i hope for the Minimum focusing distance of galaxy s10 lite's Macro. Is it the same as the galaxy A71's Macro? i am a mobile phone Macro lover, hope for your answer and thank you very much :)
Instead of using heat on the rear panel, it's better to use a, very thin, pry tool to get up under an edge and go from there. Too much heat can melt/warp the plastic.
Yup, you don't need to use too much just enough to be able to loosen the adhesive a bit, and then use a suction cup tool or something else to gain leverage to get a thin tool in between.
My Samsung s10 lite vibration is not working. I already replace the new vibration motor and still not working. Could you suggest another way to solve this problem? Is there another part that can be damaged to cause this vibration problem?
You're welcome. Once the back plate is removed and the screws on the top plastic cover and the top plastic cover are removed, you need to disconnect the flex cables, and then either apply some isopropyl alcohol around the sides of the battery and let it sit there for 30 seconds to a minute so it eats away at the adhesive underneath the battery making it easier to pry off, or you can use a hair dryer or heat gun to heat up the front of the phone where the screen is to loosen up the adhesive making it a bit easier to pry the battery off. It isn't the hardest thing but not easy either. Just takes some time n patience. Here is a link to the isopropyl alcohol: www.ifixit.com/Store/Tools/iFixit-Adhesive-Remover/IF145-400?o=4
Hi. Do you know where in India Samsung Galaxy S10 Lite spare IC chips of the motherboard would be available ? Desperately need one for my current handset which is under repairs
Please suggest one clear choice to buy between oneplus 7t oneplus 7pro and S10 lite, confusion is because of low price of 7t , beautiful screen 7pro in just 39990 and increased price of s10 lite 42999. Please suggest one phone for practical uses , I mean a complete package phone which I can use for at least next 2 to 3 years. Your suggestion will be a great help. Thanks in advance.😊
Good day PBKreviews, my s10lite got sea water damaged, the soundbox works but the mic does not work, it sounds like a static `sea sound`, the usb port works fine. Do you think its possible to fix the mic using isopropyl alcohol on the usb plate ? Because if its probably not fixable, i will order a new usb plate and replace it instead of trying to clean the current one. And at last, the adhesive is needed to put the back plate back ? If you could help me, i will be forever grateful, thanks.
Hi, you can try, and if it doesn't work then order a replacement sub board. Here is a link for some replacement precut adhesive to put the back plate back on. www.ebay.com/itm/174413751622?hash=item289bdea546:g:gRcAAOSwCh5fSibP
Klasse Video...nur leider vollkommen falsche Ansätze. Hier wird weder auf ESD Rücksicht genommen, noch auf allgemeine Verfahrensweisen! ESD Handschuhe sind Pflicht. Metallwerkzeug zum entfernen von Connectoren und Coax Kabeln - dafür gibt es ESD Werkzeuge! Wenn das Gerät danach noch funktioniert hat man wohl echt viel Glück...
I've done hundreds if not thousands of devices without any ESD gloves or tools and every single device worked afterwards. The risk is not that high, only if your in a very static environment.
Usually mobiledefenders.com has OEM parts but checked, they don't for your model phone. Just check online for EB-BA907ABY or EB-BA907ABYL and find a trusted seller with good feedback that states its OEM or original genuine.
Thank you, its probably due to them cutting down costs etc. Usually they incorporate those types of things in higher end models which they price tag is higher due to them adding additional cooling and so forth. Also processors and such are on higher end and may require more cooling on higher end devices.
@@GGBGameplays I would think the one in the Samsung would be better since it has more surface area to both absorb and transfer heat. But again factors like processor type and so forth make a difference in how much heat is produced and how much cooling is needed.
@@PBKreviews thanks for the fast reply. I ask because my S10 Lite gets very hot running heavy games, and Samsung has agressive software thermal throttling, the GPU barely runs over its minimum clock speed of 257MHz when it's hot. I didn't know it has a cooling system, I thought it didn't. I see some Poco F1 running games with stable clock speed with custom kernels, but they generally allow battery to get higher temperatures, my phone's battery keeps 36-38ºC running games, but CPU and GPU achive up to 80ºC (according to the softwares). Where I live is pretty hot the whole year though.
@@GGBGameplays Not sure, I know both the screen being on generates a lot of heat, as well as the processor running and if its an online game, the phone using the internet generates heat as well on top of the battery so there is a lot of heat. Some people also leave their phone plugged into charge which also adds a bunch of heat there. If you have any sort of case that can also retain heat instead of letting it dissipate.
@@PBKreviews alrite, wished Samsung added water resistant like mesh for a piece of mind since i am using this phone. Is it possible to test like putting a drop of water on the mesh and pushing it, seeing if the water goes through the speaker?
@@PBKreviews thank you sir, recently took electrical engineering and fond of mobiles, thank you for this video, planning to watch more of your vids for learning 😀
Hi i have an issue with my s10 lite. When i plug in the usb c cable it wont charge and a popup comes out saying that the temperature of the battery is too low. I tried installing an app to check the battery status and it says that my battery is at -20° C. What could be the problem? When i push in the back, a little under the cameras it returns to ~25-30° C but just for a few seconds. Anyways, nice video and explanations. And thanks to anyone that could help me as well.
Hi, it can be the charger port/sub board which needs to be replaced, the battery, or the wireless charging coil if the phone has one which the s10 lite doesn't. You would need to check those parts one by one and see which one is the faulty one.
hi. this phone's splashproof have much difference of galaxy s10's waterproof? in this video, i saw rubber gasket and i think it is sign of splashproof or waterproof. am i right? sorry for my bad english :)
No problem, yes the phone is splash proof from the looks of it, has water resistant adhesive so would help against small amounts of water not getting in. But not sure exactly how resistant it will be. :) hope this helps.
@@rolly5888 I personally would not risk it. Most likely that phone would have charger port issues down the line or mic/speaker issues. Its possible the phone can make it through some water but the chances of parts like cameras, speakers and mics not working properly afterward or the phone down the line not working at all once the water seeps onto the main board is high. Based off the teardown, I didn't see too much in the way of water resistant features so I would believe it would be best not to take it in a pool or anything like that. Being in the bathroom while someone showers, that should be fine but ya I would not take the phone into the water with me.
My phone went black screen last night and I tried force restart but it didn't work. Whenever I try force restart it vibrates a little bit and then nothing. Can you tell me what's wrong with my phone.
Its possible you have a defective screen or the backlight stopped working or something similar. Maybe there is a hairline crack preventing the screen from working. It can be many things so not sure exactly. You can try taking it apart and disconnecting the battery cable and reconnecting it to see if it helps but I don't think that would be the issue, seems more like a display issue.
@@xgallium2625 Its not really a seal like glued down, more like to have all the sound aimed at going out the speaker vent and not bouncing around the phone I would say. I would say the phone is probably splash resistant (minor splash of water) but not if it were to be dunked into water.
sometimes its possible as long as the connector is the same but in most cases not because usually the software has to be compatible with the hardware as well. Usually only works between very close model phones which have almost identical hardware say if an S10 had the same layout motherboard as an S10 plus and the s10 plus front facing camera was better than the S10, you might be able to swap them as long as the connector and everything was the same.
@@PBKreviews Thanx. I'll have to look into that. I figured it wasnt possible. I probably won't bother opening the phone like that though. Too risky. Thank you anyways
Totally normal, all phones ive owned with the processor on the top could heat up when using. If its get really hot maybe something wrong but then the phone says it overheatm otherwise totally nothing to worry
Yes, if you take apart the phone, the warranty is deemed void if the manufacture knows about it. Some phones have a sticker over one or two of the screws so if its removed they know it's been tampered with.
First make sure your sim is not the problem, then make sure your APN settings are correct. And then if its hardware, you need to make sure the top and bottom plastic covers are screwed down in place properly since those have antenna lines drawn through them. Also you need to make sure the wire cables running from the main board to the sub board on bottom are connected properly.
Just go to sleep. The smartphone has a premium look thanks to aluminium frame. It has a flat screen that is an intelligent choice. Bigger battery than s10plus. 1080p display, and plastic back. My unique complaint about it it's the absence of the headphone jack.
Pop out the Batterie connector...
In my mind: Like a little Lego"
Very good video ^^
lol, same 😂😂, Jerry's voice is all over the mind 😂😂
Very good tutorial. Very educative and informative.loved watching it. Thanks for the video. Watched it from my s10 lite. 🙂👌👍
Thank you, and you're welcome
Are you facing any green tint at low brightness on your device... Many people are complaining about this issue....
How can I repair my S10 lite camera
How can I contact ?
I'm impressed! My usb port broke recently due to water damage, I'm able to replace it for 13 euro, 13 euro!! Some people would buy a new phone after something like this
But you would lose the fingerprint option
@@nnnnnnnnn8888 no?
Watching this on my s10 lite. dose it protect from dust ? Other wise thanx for your video
Hi yes, it has water/dust resistant type adhesive on the back which I would assume would protect the phone from casual slashes or dust but nothing really major as far as rubber gaskets around connectors and so forth. Thanks :)
@Ahijit Paul aluminium
Just watching out of curiosity since I've been wanting to buy one of these, but great video buddy, really well done.
Thank you, I appreciate it.
@@PBKreviews Also, have you heard anything about the green tint on screen bug on the Samsung displays when it's at 5~15% brightness? I've seen a lot of people reporting this issue recently and has made me consider if I should get one or not.
@@mateuscampello no I haven't herd about it, haven't followed up too much with this device
@@mateuscampello ive used the phone for a month now, and the brightness was mostly below 20%, i didnt encounter any greent tint issues on my phone, but i think those tint issues mostly happens on samsung flagships ???
Wow, I finally the video that I had been looking for. Sir which color looks the best, white or black. Pleae tell as I want to order it.
I prefer black because with white, it tends to get dirty quick, any small scratches and dings tend to show up a lot more. Hope this helps :)
Glad to see the USB port is MODULAR!!! Unlike his S10 counterparts with awful USB welded to the motherboard
Did you notice anything to indicate that it would resist a bit of water? Like any rubber, etc etc. Not asking if it would resist being submerged, but just splashes etc etc.
Great video btw.
Thanks, It does have strong adhesive on the back plate and a few rubber gaskets on the charger port board but none on the main board. I would say it should hold up to some splash but I wouldn't dunk it in water.
@@yanikebrown-young4397 lol wtf.
That's like saying "Hey, I wanna skydive with a parachute bag full of nails, will the nails turn into a chute?"
@@yanikebrown-young4397 I'm not going to waste my life watching a phone that's not water resistant be submerged, in about a month it'll die all the way. Fr.
wow 👏 😮 you really professional
Thank you!
Best video ever
👍
This man rite here is a legend or this video. Haft way tho as only my volume up stuck in (plus made I worst 😅) but good video mate thanks alot. Lol next it's the switch charge port replacement if ya got a video for that aswell lol be a diamond if did pmsfl
Thanks :)
Lol Samsung wanted £58 for the back screen and £185 for the volume UP button as stuck in. (just on that now lol
Love the video, guess a transparent back mod would be easy to do on this device then?
Thanks, and yea shouldn't be too difficult.
If i replace the logic board & motherboard from a broken screen to one with a good screen, would that suffice ?
Excellent video
My phone was dropped into a small puddle where the USB c port is. All is fine except the constant message # USB connector connected and disconnected, continuously pops up. No screen going to sleep and draining the battery.
From this video I take it needs a new charge port board. Where can I purchase these please. Any help appreciated 🙏 and great video
Hi, thank you and here is a link: amzn.to/3fxSu07
Samsung galaxy s10 lite, here's teardown look more forward out phone love smartphone 🎀💓💓💓🎀🇰🇷📱🇰🇷📱
Thank you
Does it have water protection gasket and mesh in the speaker and ports?
Yeah. For splash protection. It isn't water resistant though.
The S10 lite was 'lite' on a few of the better options of the S10.
Which part of the phone hold its storage? Can i dissemble it from a broken s10lite and put it in a new replacement s10lite?
Hi, the onboard storage is soldered onto the motherboard and you would not be able to take it off to move it to another phone. Requires expert soldering skills etc.
Would you please disassembly the camera modules frame parts I wonder know the camera's FPC shape thank you.
Nowadays i'm thinking to buy this s10 lite. But, i compare this device with ip11, ip12 and 12 mini. Do you have any recommendation to me? Note: OS doesn't matter.
I honestly don't like iphone's at all. They may feel nice but the software and apps annoy me a lot and is very locked down so I personally would not use an iPhone.
Beautiful
Does Samsung S10 Lite has liquid cooling????? Plz answer....
equal to jerry . respect👌👌👌
I have a non working one needing probably a motherboard. Can you tell me what the top cover is called as mine got damaged during disassembly, also what is the electronic component inside of this?
are you referring to that black plastic cover that's screwed down?
Do you need to reapply adhesive after fixing the prob? Or is that to try to keep prying fingers out?
Yes you would need to re-apply the adhesive. You would need this part www.ebay.com/itm/373557943272?hash=item56f9c9dbe8:g:RrwAAOSw5jVgiG0i
Hi,may i hope for the Minimum focusing distance of galaxy s10 lite's Macro. Is it the same as the galaxy A71's Macro? i am a mobile phone Macro lover, hope for your answer and thank you very much :)
Instead of using heat on the rear panel, it's better to use a, very thin, pry tool to get up under an edge and go from there. Too much heat can melt/warp the plastic.
Yup, you don't need to use too much just enough to be able to loosen the adhesive a bit, and then use a suction cup tool or something else to gain leverage to get a thin tool in between.
My Samsung s10 lite vibration is not working. I already replace the new vibration motor and still not working. Could you suggest another way to solve this problem? Is there another part that can be damaged to cause this vibration problem?
I am using this mobile, but they didn't provide any IP rating, but is this water proof?
Thank you. Is it easy to replace the battery?
You're welcome. Once the back plate is removed and the screws on the top plastic cover and the top plastic cover are removed, you need to disconnect the flex cables, and then either apply some isopropyl alcohol around the sides of the battery and let it sit there for 30 seconds to a minute so it eats away at the adhesive underneath the battery making it easier to pry off, or you can use a hair dryer or heat gun to heat up the front of the phone where the screen is to loosen up the adhesive making it a bit easier to pry the battery off. It isn't the hardest thing but not easy either. Just takes some time n patience. Here is a link to the isopropyl alcohol: www.ifixit.com/Store/Tools/iFixit-Adhesive-Remover/IF145-400?o=4
What is the function of the blue and red wire on the right of the battery? When I got the phone, the back cover was open because of their part.
Those are usually antenna cables which connect the antenna contacts from the sub board to the main board.
What's inside that massive Super OIS Camera?
Hi. Do you know where in India Samsung Galaxy S10 Lite spare IC chips of the motherboard would be available ? Desperately need one for my current handset which is under repairs
Sorry not sure.
Does s10 lite have gorilla glass protection ??
Official site also doesn't provide this info...!!
Has Gorilla Glass 3+
@@PBKreviews thanks 4 the info !!
Please suggest one clear choice to buy between oneplus 7t oneplus 7pro and S10 lite, confusion is because of low price of 7t , beautiful screen 7pro in just 39990 and increased price of s10 lite 42999. Please suggest one phone for practical uses , I mean a complete package phone which I can use for at least next 2 to 3 years. Your suggestion will be a great help. Thanks in advance.😊
S10 lite
Does it have any water protection of any sort?
Good day PBKreviews, my s10lite got sea water damaged, the soundbox works but the mic does not work, it sounds like a static `sea sound`, the usb port works fine.
Do you think its possible to fix the mic using isopropyl alcohol on the usb plate ?
Because if its probably not fixable, i will order a new usb plate and replace it instead of trying to clean the current one.
And at last, the adhesive is needed to put the back plate back ?
If you could help me, i will be forever grateful, thanks.
Hi, you can try, and if it doesn't work then order a replacement sub board. Here is a link for some replacement precut adhesive to put the back plate back on. www.ebay.com/itm/174413751622?hash=item289bdea546:g:gRcAAOSwCh5fSibP
@@PBKreviews Thank you, really appreciated!
@@PBKreviews Tried cleaning with alcohol but no success, I guess it got short circuited. Then I replaced The usb board, mic is back! Thanks
Klasse Video...nur leider vollkommen falsche Ansätze. Hier wird weder auf ESD Rücksicht genommen, noch auf allgemeine Verfahrensweisen! ESD Handschuhe sind Pflicht. Metallwerkzeug zum entfernen von Connectoren und Coax Kabeln - dafür gibt es ESD Werkzeuge!
Wenn das Gerät danach noch funktioniert hat man wohl echt viel Glück...
I've done hundreds if not thousands of devices without any ESD gloves or tools and every single device worked afterwards. The risk is not that high, only if your in a very static environment.
Any idea where I can find an OEM replacement battery that isn't fake?
Usually mobiledefenders.com has OEM parts but checked, they don't for your model phone. Just check online for EB-BA907ABY or EB-BA907ABYL and find a trusted seller with good feedback that states its OEM or original genuine.
Can I order blue colour please dear reply me
The frame is metal or metal just bumper outside?
frame is metal
@@PBKreviews thank you
@@vadimberd3460 you're welcome
Great video
I wonder why the A series don't have the copper stuff for cooling the processor
Do you know why?
Thank you, its probably due to them cutting down costs etc. Usually they incorporate those types of things in higher end models which they price tag is higher due to them adding additional cooling and so forth. Also processors and such are on higher end and may require more cooling on higher end devices.
@@PBKreviews is that cooling system better or worse when compared to those found in Poco F1, for example?
@@GGBGameplays I would think the one in the Samsung would be better since it has more surface area to both absorb and transfer heat. But again factors like processor type and so forth make a difference in how much heat is produced and how much cooling is needed.
@@PBKreviews thanks for the fast reply. I ask because my S10 Lite gets very hot running heavy games, and Samsung has agressive software thermal throttling, the GPU barely runs over its minimum clock speed of 257MHz when it's hot. I didn't know it has a cooling system, I thought it didn't. I see some Poco F1 running games with stable clock speed with custom kernels, but they generally allow battery to get higher temperatures, my phone's battery keeps 36-38ºC running games, but CPU and GPU achive up to 80ºC (according to the softwares). Where I live is pretty hot the whole year though.
@@GGBGameplays Not sure, I know both the screen being on generates a lot of heat, as well as the processor running and if its an online game, the phone using the internet generates heat as well on top of the battery so there is a lot of heat. Some people also leave their phone plugged into charge which also adds a bunch of heat there. If you have any sort of case that can also retain heat instead of letting it dissipate.
is top microphone is changeable?
its not clear i can't see it disassembled!
its soldered onto the main board, its not user replaceable.
does the phone have any water resistant mesh like the speaker or the earpiece? even though the phone isn't IP Rated
Not from what I could tell
@@PBKreviews alrite, wished Samsung added water resistant like mesh for a piece of mind since i am using this phone. Is it possible to test like putting a drop of water on the mesh and pushing it, seeing if the water goes through the speaker?
Watching on my s10 lite.. does it comes with pre installed screen protector? I have seen scratches on my screen just within a week...worried
Yes this one did, but not sure if its the same for every carrier/model
Will the insides of s10 lite strong against impacts if u accidentally dropped it from your hands?
It should hold well, its a well built device
@@PBKreviews thank you sir, recently took electrical engineering and fond of mobiles, thank you for this video, planning to watch more of your vids for learning 😀
Hi i have an issue with my s10 lite. When i plug in the usb c cable it wont charge and a popup comes out saying that the temperature of the battery is too low. I tried installing an app to check the battery status and it says that my battery is at -20° C. What could be the problem? When i push in the back, a little under the cameras it returns to ~25-30° C but just for a few seconds. Anyways, nice video and explanations. And thanks to anyone that could help me as well.
Hi, it can be the charger port/sub board which needs to be replaced, the battery, or the wireless charging coil if the phone has one which the s10 lite doesn't. You would need to check those parts one by one and see which one is the faulty one.
@@PBKreviewsOk I got it thank you so much for replaying even tho this video is 1 y o.
In which part of the phone is locate the 4g antenna?
not sure exactly which one of the antenna is for 4G
Can you tell me how to solve display no lights in Samsung s10 lite
Not sure, it can be a defective screen or a problem on the motherboard with the display chip or one of the chips controlling the back light.
Sabes cual es el test point de ese modelo
i am unable to find the adhesive for the back cover
www.ebay.com/itm/402776860610?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=402776860610&targetid=1496860770852&device=c&mktype=pla&googleloc=9031131&poi=&campaignid=18275482793&mkgroupid=143777601809&rlsatarget=aud-1480434320588:pla-1496860770852&abcId=9301711&merchantid=101500817&gclid=CjwKCAjwvsqZBhAlEiwAqAHElZ_62weKSirH14IcbzyNTutTmf_SHOCJtcdBzEyYFkf26Wes4ZAiZRoCbxoQAvD_BwE
Nice video
Thank you
Is there any cooling technology in samsung s10 lite??
3:35
My phone is fallen in water, how can I make him dry inside?
Anyone knows how to fix the no mobile issue on s10 lite? The wifi and nfc is still working
hi. this phone's splashproof have much difference of galaxy s10's waterproof?
in this video, i saw rubber gasket and i think it is sign of splashproof or waterproof. am i right?
sorry for my bad english :)
No problem, yes the phone is splash proof from the looks of it, has water resistant adhesive so would help against small amounts of water not getting in. But not sure exactly how resistant it will be. :) hope this helps.
@@PBKreviews it's so helpful to me. thanks lol
good day
@@user-gs6jq8rl3t you're welcome :)
Your pry tool looks like a guitar plectrum haha
ya lol pretty much the same thing
Hi! Tell me please, is this smartphone waterproof? Some people says, that it protected, but others not. Can i wash it in pool? Thanks 🙃
No its not rated to be water proof. It might take a small splash of water but I don't think it would survive being placed inside water.
@@PBKreviews ruclips.net/video/aeTHpfBs_w0/видео.html
But in this video smart looks like it waterproof 😅
But, anyway, thank you :)
@@rolly5888 I personally would not risk it. Most likely that phone would have charger port issues down the line or mic/speaker issues. Its possible the phone can make it through some water but the chances of parts like cameras, speakers and mics not working properly afterward or the phone down the line not working at all once the water seeps onto the main board is high. Based off the teardown, I didn't see too much in the way of water resistant features so I would believe it would be best not to take it in a pool or anything like that. Being in the bathroom while someone showers, that should be fine but ya I would not take the phone into the water with me.
It's not waterproof, my phone was fallen totally in water, it's not wirking((
@@dinarim7163 s10 lite?
Does it have any kindaa Gorilla glass protection on screen?
Yes
my 2nd sim not working they said to change motherboard... is this correct??
What is the code number ic charging s10lite?thx
I'm not sure
Why u stopped at the hardest part? Remove the screen then?
Once you take the phone apart, all that is left is to heat up the screen and pry it off so no point in damaging a working screen to just pry it off.
When this phone has better cooling system than the note 20 series😂
lol ya.
Thats why its so smooothhh
@@XxNoMercyNL not necessarily smoother than the 120 hz though that's on a different level😷
Hello, how about repair ZTE Blade 20 Smart?
Will look into doing it
My phone went black screen last night and I tried force restart but it didn't work. Whenever I try force restart it vibrates a little bit and then nothing. Can you tell me what's wrong with my phone.
Its possible you have a defective screen or the backlight stopped working or something similar. Maybe there is a hairline crack preventing the screen from working. It can be many things so not sure exactly. You can try taking it apart and disconnecting the battery cable and reconnecting it to see if it helps but I don't think that would be the issue, seems more like a display issue.
At 4:17, what are those gray things on the speaker assembly ?
Just a rubber seal around the speaker
@@PBKreviews whats the purpose of those rubber like seal on the speaker assembly? the phone should be able to handle some abuse like light raining?
@@xgallium2625 Its not really a seal like glued down, more like to have all the sound aimed at going out the speaker vent and not bouncing around the phone I would say. I would say the phone is probably splash resistant (minor splash of water) but not if it were to be dunked into water.
@@PBKreviews so abit of rain will be fine? especially the earpiece area
the sim card tray also appears to have a rubber seal when i took it out.
Can't the front facing camera be exchanged for a better cam? It sucks
sometimes its possible as long as the connector is the same but in most cases not because usually the software has to be compatible with the hardware as well. Usually only works between very close model phones which have almost identical hardware say if an S10 had the same layout motherboard as an S10 plus and the s10 plus front facing camera was better than the S10, you might be able to swap them as long as the connector and everything was the same.
@@PBKreviews Thanx. I'll have to look into that. I figured it wasnt possible. I probably won't bother opening the phone like that though. Too risky. Thank you anyways
@@anthonymathon1552 no problem
My s10 lite back panel has some tiny scratches is there any way to remove it
Are you facing any green tint on grey background at low brightness on your device... Many people are complaining about this issue....
@@ashwynfernandes722 yes I am facing it
someone sold me a phone he didnt tell me the volume down button dont work, i hope i can replace the volume flex cable
Yes the volume button and power button with flex cable is replaceable
Does support wireless charging?
Hi, no wireless charging support.
Is it normal for my S10 Lite to heat up at the free space next to the camera?
Yes, there is components there both of the mother board and camera's so should be normal if being used to heat up.
Totally normal, all phones ive owned with the processor on the top could heat up when using. If its get really hot maybe something wrong but then the phone says it overheatm otherwise totally nothing to worry
Please do note 10 lite.
Should have the Note 10 Lite done within a week or so
@@PBKreviews ohhh I'm pumped now
it supports wireless charger???
no wireless charger
Pleas i want namber ic charger
Is the frame plastic ?
metal
The teardown of any smartphone affects its warranty????
Yes, if you take apart the phone, the warranty is deemed void if the manufacture knows about it. Some phones have a sticker over one or two of the screws so if its removed they know it's been tampered with.
does it have liquid cooling system for games?
ya it does😁
@@Rahul-pq4sd its weird tho, it heats up alot when i play sky children of the light...can u explain pls im new to this stuff
@@bananajoe4220 it kinda also dependes the brightness of your phone and also the frame rate
@@Rahul-pq4sd oh see...so i guess this phone isnt meant for heavy gaming
@@bananajoe4220 yea but it isbpretty good tho
mainframe metal or plastic?
metal
The back is plastic, the frame is metal/alluminium
How can I fix network connection?
First make sure your sim is not the problem, then make sure your APN settings are correct. And then if its hardware, you need to make sure the top and bottom plastic covers are screwed down in place properly since those have antenna lines drawn through them. Also you need to make sure the wire cables running from the main board to the sub board on bottom are connected properly.
What’s about “note 10 lite” ?
working on it
Lenovo Z6 lite
L38111
Por Favor
Trying to get my hands on one, will do it as soon as I get it, stay tuned :)
Is there an official IP rating?
No
لماذا لا يوجد ترجمه بالعربي
Not sure, I don't put the captions its automatically provided from RUclips
@@PBKreviews 🤔🤔🤔
Is this Device is water resistant????
Yes
Please tear down moto one macro
Ok will look into getting the phone and doing the video.
Atleast this device is splashproof, am I right?
Yes, correct.
Horrible construction. The phone looks like a cheap Chinese phone like Ulephone, Leagoo, Bluboo, etc. Just horrible! Nothing is premium about it.
Just go to sleep. The smartphone has a premium look thanks to aluminium frame. It has a flat screen that is an intelligent choice. Bigger battery than s10plus. 1080p display, and plastic back. My unique complaint about it it's the absence of the headphone jack.
"Dont judge a book by its cover"
XDD
This is where the premium hides itself XDD
I think you're those kind of people that thinks "the better the looks the premium and faster the device would be"
Nice video
Thanks!