Amazing work the detail is spectacular. I wish the videos would show the products that were used. What primer to get that body finish? What metallics on the suspension? What glue to hold the glass? I have so many questions.
How do you get the paint so smooth and glossy? I see it appears you use Tamiya compound? What else? I suffer from orange peel on my cars and need this info to further my skills
Thank you for watching and leaving a message~ After I spray the clear paint, I will sand it again with 3000# sandpaper. In this step, be careful not to over sand~ This will solve the orange peel problem and then use it in order. Medium-fine abrasive can become very smooth It's roughly like this. Next time I have a chance, I will shoot a polishing video~
Depending on how bad your orange peel is it could be because you arent letting the previous layer dry long enough. The layer under your clear will still be outgassing and cause orange peel in your clear due to it, so maybe leave it out for a few days between base coat to clear if the issue persists
Masterpiece ! It’s a time machine bring me back to the SWC old crazy time. Thank you.
Thank you~
Very nice build!! You got a new subscriber:)
I would love to see you adding the paint (colors) to the video as a text overlay.
Thank you for your support~
perfect timing as I just got this kit Great build thanks for sharing your work
Beautiful build! I'm glad I found your channel!
Thank you for your support~ The new video will be on the shelves soon~
Very good word. This Kit is one of my desires....
Amazing work the detail is spectacular. I wish the videos would show the products that were used.
What primer to get that body finish? What metallics on the suspension? What glue to hold the glass?
I have so many questions.
The primer is tamiya fine Grey surface primer, and he used kiva silver for body paint, he probably used chrome silver for the suspension
And mod podge for glass
Mica silver*
Just starting mine.
Wish you all the best
Very nice build, subscribed
Excellent build. Thanks for sharing.
My favorite car! #thumbsup
Beautiful build.
Thank you😄
How do you get the paint so smooth and glossy? I see it appears you use Tamiya compound? What else? I suffer from orange peel on my cars and need this info to further my skills
Thank you for watching and leaving a message~ After I spray the clear paint, I will sand it again with 3000# sandpaper. In this step, be careful not to over sand~ This will solve the orange peel problem and then use it in order.
Medium-fine abrasive can become very smooth
It's roughly like this. Next time I have a chance, I will shoot a polishing video~
Depending on how bad your orange peel is it could be because you arent letting the previous layer dry long enough. The layer under your clear will still be outgassing and cause orange peel in your clear due to it, so maybe leave it out for a few days between base coat to clear if the issue persists
Suuuuuperb!
Awesome build. What was the body paint you used on it?
thank you ~
I have a description in the video ruclips.net/video/RwkzY_P199w/видео.html
您好~
想跟您請問~
1. 前擋風玻璃使用所覆的遮蔽膠帶是如何精準對位的? 我貼了半小時還是沒辦法讓左右兩邊對稱會一直歪掉
2. 前擋風玻璃是用消基漆噴塗嗎? 如果是的話，那怎麼解決若噴進遮蔽膠帶與當風玻璃的空隙?(比如毛邊或滲漆)我試過用田宮消基漆溶劑清潔但發現它會咬塑膠件(整個透明變霧化)
以上想向您請教~盼覆~
您好 我也是對很久才對上的～還有一個方式，是把膠帶裁ㄧ半，然後分兩次貼 ，有接縫的部分再自行補上膠帶。希望對你有幫助👍
感謝您對於1.的回答，我今晚就來試
另外2.不知您有無高見可以指導我一下🙏
@@郭馬可-i5q 您好～關於第二問題 我是用硝基漆噴的～噴漆之前的遮蔽膠袋一定要再三壓好 不然真的溢漆,就很難救了～ 不然就是你用法瑯漆 田宮法瑯漆 應該會比硝基漆好擦 我印象中好像也不會影響透明件～但是要注意不要用太多 塑料容易脆化～ 所以我最終建議 遮蔽膠帶確實壓好才是正解～
@@le091888 謝謝您的回答及提醒，抱歉兩天 後才回復你，琺瑯漆我也用過，但經驗不是很好，也是傷害到透明件，但有可能是我棉花棒沾了太多x-20 ，我先前是使用田宮水性漆x-1直接筆塗處理，捨棄田宮原本的遮蔽膠帶重新按四邊割四條弧型對應，但總覺得這方法很笨，看完你的回覆後我的對位精準度也上升了~! 我的c9也接近完成了，再次感謝你的影片及回復，讓我受益良多!
@@郭馬可-i5q 您客氣了～大家互相研究交流,希望您的c9一切順利～
Did you clearcoat before decals?
I first apply the water sticker, then spray the protective paint, and then perform the polishing operation
can i know the exact glue u used
Which part of the glue?
問個問題噴車殼是用0.5mm的噴比嗎? 感謝
我是用0.4mm的
;)