Good afternoon, I have a query, I have problems with nc studio of my cnc, all the parameters are placed correctly, but now it is doing the job, but with a smaller size, like 50% of the real size, any suggestions? A week ago everything was fine and it worked perfectly now I don't know what happened but it doesn't work
Is there a way, if I move z to a certain position that incan input what the position is I want it to be? like if I move Z to 0 but I want to tell NC Studio Z is actually -10 is there a way to do that?
hello sir how will i set work piece coordinate with my 3030 china cnc using nc studio, so that it can work at any point on my work piece, for instance my work piece dimension is 20cm by 15cm, how will i know the starting point of the spindle. pls help
I WANT TO INCREASE FEEDRATE WHEN MACHINE GOES TO OTHER OBJECT FOR CUTTING AFTER CUTTING AN OBJECT, MEANS DONT WANT TO INCREASE FEEDRATE DURING CUTTING.
Dear friends, I bought a cnc machine a few years ago, my problem now is that I can not change the rpm values, I only have three values as shown in the attachment, I can not set any other value different from those values and I would like to increase the rpm .Can you help me? Thanks a lot
NC studio is using 7 steps signal for control the spindle speed (rpm). It's like 7 switches. Then you need to set in the percentage in your inverter like 10% 20% 40% 60% 80% and 100%. For example, spindle is 400Hz is 24,000 rpm (100% max) and 200 Hz (50%) is 12000rpm respectively.
Buenas tardes tengo una consulta tengo problemas con nc studio de mi cnc están todos los parámetros colocados correctamente pero ahora está haciendo el trabajo pero con una talla más pequeña como al 50 % del tamaño real alguna sugerencia Hace una semana estaba todo bien y funcionaba perfecto ahora no c que pasó pero no funciona
Good afternoon, I have a query, I have problems with nc studio of my cnc, all the parameters are placed correctly, but now it is doing the job, but with a smaller size, like 50% of the real size, any suggestions?
A week ago everything was fine and it worked perfectly now I don't know what happened but it doesn't work
Is there a way, if I move z to a certain position that incan input what the position is I want it to be? like if I move Z to 0 but I want to tell NC Studio Z is actually -10 is there a way to do that?
Hola donde ubicó la opción parámetros, en mi nc studio no aparece, gracias
The machine say that the icon indicates that the range is out of the mechanichal limits.
What if I change all the parameter and my machine does't move?
what can I do?
Hello i bought a machine lately witch uses cnc studio. But it seems i miss something. Does it require a dog key (dongle)? please can you help me?
AND CAN WE SLOW SIMULATION SPEED IN NCSTUDIO TO CHECK LINE NO.????
hello sir how will i set work piece coordinate with my 3030 china cnc using nc studio, so that it can work at any point on my work piece, for instance my work piece dimension is 20cm by 15cm, how will i know the starting point of the spindle. pls help
I WANT TO INCREASE FEEDRATE WHEN MACHINE GOES TO OTHER OBJECT FOR
CUTTING AFTER CUTTING AN OBJECT, MEANS DONT WANT TO INCREASE FEEDRATE
DURING CUTTING.
come facio si la mia mcachina non taglie il cerchio justo
Hi, please how can i change the units from mm to inches un nc studio? Tanks
Dear friends, I bought a cnc machine a few years ago, my problem now is that I can not change the rpm values, I only have three values as shown in the attachment, I can not set any other value different from those values and I would like to increase the rpm .Can you help me?
Thanks a lot
NC studio is using 7 steps signal for control the spindle speed (rpm). It's like 7 switches. Then you need to set in the percentage in your inverter like 10% 20% 40% 60% 80% and 100%. For example, spindle is 400Hz is 24,000 rpm (100% max) and 200 Hz (50%) is 12000rpm respectively.
I have a manual in Chinese and do not understand that pb000 should I change? Thank You!
Será de pb086 a pb091?
where I can buy nc stodio
can nc studio draw the shape or we need a different software
NC studio is just a controller. You will need different software to do CAD
am using artcam pro 2008. what kind of format i send for my machine
nc file. standard g-code
x y z are not moving in my ncstudio software but spindle is running and simulation is not showing so please help give solution please do the needful
i need to help stop my spindle whay start
I have also this problem ?what will you do?
تزيد مكينتي المقاس بمقدار 1 سم كيف اضبط ءلك
Can me do G0 more than 8000 ?
I need learn CNC engraving machine training
Buenas tardes tengo una consulta tengo problemas con nc studio de mi cnc están todos los parámetros colocados correctamente pero ahora está haciendo el trabajo pero con una talla más pequeña como al 50 % del tamaño real alguna sugerencia
Hace una semana estaba todo bien y funcionaba perfecto ahora no c que pasó pero no funciona
What is causing this problem Choose Bicycle pump tool Head
Hi wlove motor sistem an no problems in of glen plot
Hello sir,
This is very needful
I need learn CNC engraving machine training