Very interesting technique, great results too. You just have to be aware that sharp top edges, say the end of a cube, will still cause deep plunges and may still damage the tool. Guess this is something to be evaluated on a per-job basis.
Great jobs as always Roger. Your video always inspire me. With the MDF what did you do to sand the finished product? It looked like from the machine is had some grooves from the tool head, but what you held up looked like it had been sanded.
Принцип прогрессивной телеразвёртки. При современной элементной базе легко прграммируется, или инфа идёт с чертежа, а так же может копировать с оригинала. Если чертёж без полутонов, то никаких проблем, а с полутонами надо повозиться. Всё это отработано в сканерах и принтерах.
Please post your feeds and speeds, this would really help us. Also there is a big step difference in the piece from when it came off the CNC looking like minecraft/lego art to a nice beautiful smooth finished piece. Did you run an additional pass with 1mm cutter or did you sand it. Please comment on your finishing technique.
You know if you did a roughing pass on the whole piece with a 1/2 inch end mill before you use your smaller tapered ball nose, it would remove a majority of the material first which would end up finishing the piece faster then you would if you just used the smaller tapered ball nose as well as it is easier on your tooling. This is how I have been doing it for the past 10 years and I have never broken a tooling yet.
Ron Hutcheon Yes he is helping people but what took him 4 hours would have only taken 1-2 hours doing it the right way. And to answer your question I'm new to RUclips so I haven't done any videos yet. Plus it doesn't matter if I do or not, but if you're going to help somebody you should help them the proper way not the way that's going to take forever to do a cost you time and money especially if you're trying to do this for a living in making money like most hobbyist do they try and sell stuff if it's going to take you four hours to make a product that probably cost a fortune to sell and nobody's gonna buy it, because you have to charge for the time it took to make that product.
I am surprised by the detail in MDF. I always have trouble with thin sections breaking off while routing. Looks like a neat project. Do you sell these?
if you look closely at the piece when he finished with the 6mm it still had lego ledges/minecraft looking steps in the piece...then he snaps to the finished and all the rounded humps are all nice and smooth. so either he spent 2 hours sanding it or he ran a 1mm cutter.
Pacific Tooling ships worldwide: Email me at: info@pacifictooling.com I will send you information on our new * Lathe * and 4040, 6060, 6090 and 6012 (linear rail model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225 . Pacific Tooling; Australian Inventor Roger Clyde Webb ;-)
Hi, Email me at : info@pacifictooling.com I will send you information on our new Wood Lathe and CNC routers, 4040, 6060, 6090 and 6012 (linear rail model). Pacific Tooling, Australian Inventor Roger Clyde Webb
Hi, Email me at : info@pacifictooling.com I will send you information on our new Wood Lathes and CNC routers, 4040, 6060, 6090 , 6012 , 1212, 1224, 1325 and now CNC 6040, 6090 , 1390 Lasers (linear rail model), and machine tool accessories . Pacific Tooling, Australian Inventor Roger Clyde Webb
Hi, see videos, 230; 231 for CNC routers and 232 for lasers on my RUclips channel, AND OR Pacific Tooling ships worldwide: Email me at info@pacifictooling.com I will send you information on our new * Lathe * and 4040, 6060, 6090 and 6012 (linear rail model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225. USD only!!! Pacific Tooling; Australian Inventor Roger Clyde Webb
Hola buen día como puedo hacer para obtener información sobre la maquina. Como que maderas se pueden trabajar y hasta que dimensiones y lo esencial el precio y la entrega yo le escribo desde el ecuador
Pacific Tooling envía a todo el mundo: envíeme un correo electrónico a info@pacifictooling.com. Le enviaré información sobre nuestro nuevo * Torno * y 4040, 6060, 6090 y 6012 (carril lineal modelo) Routers CNC y láser CNC 6040, 6090, 1390 y 1225. Pacific Tooling; El inventor australiano Roger Clyde Webb
Hi Carlos, Pacific Tooling ships worldwide: Email me at info@pacifictooling.com I will send you information on our new * Lathe * and 4040, 6060, 6090 and 6012 (linear rail model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225. Pacific Tooling; Australian Inventor Roger Clyde Webb
You need to see more of my videos Pacific Tooling ships worldwide: Email me at info@pacifictooling.com I will send you information on our new * Lathe * and 4040, 6040, 6060, 6090 and 6012 (linear rail model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225. Pacific Tooling; Australian Inventor Roger Clyde Webb
Wonderful work!
Very interesting technique, great results too. You just have to be aware that sharp top edges, say the end of a cube, will still cause deep plunges and may still damage the tool. Guess this is something to be evaluated on a per-job basis.
What's your favorite brand of cnc router? All I would like to use it for is wood carving
DATRON
My question is that how you will paint on the MDF
oohw I enjoyed! it was amazing to see how it was made!
is it faster if you make bigger tool first ?
Lovely. How much would you sell a 3D carving done on maple size 6"x9"
Thanks
would you not rough out all deep areas in 1st past to quicking total time and save machine hours.
Great jobs as always Roger. Your video always inspire me.
With the MDF what did you do to sand the finished product? It looked like from the machine is had some grooves from the tool head, but what you held up looked like it had been sanded.
Принцип прогрессивной телеразвёртки. При современной элементной базе легко прграммируется, или инфа идёт с чертежа, а так же может копировать с оригинала. Если чертёж без полутонов, то никаких проблем, а с полутонами надо повозиться. Всё это отработано в сканерах и принтерах.
Amazing. How many of these works the bit can do until it got worn?
Please post your feeds and speeds, this would really help us. Also there is a big step difference in the piece from when it came off the CNC looking like minecraft/lego art to a nice beautiful smooth finished piece. Did you run an additional pass with 1mm cutter or did you sand it. Please comment on your finishing technique.
Robot Bender how much
what kind of wood do you use?
wow this is awesome looking good
where do you get these 3D files?
hi can u plz tell me how to pause the spindle at nc studio for manual tool changing plz plz
hi roger great work how do you setup the 3d pictures (process) before coming to cnc studio software
You know if you did a roughing pass on the whole piece with a 1/2 inch end mill before you use your smaller tapered ball nose, it would remove a majority of the material first which would end up finishing the piece faster then you would if you just used the smaller tapered ball nose as well as it is easier on your tooling. This is how I have been doing it for the past 10 years and I have never broken a tooling yet.
At least he's doing something to help people! How many videos do you have??
Ron Hutcheon Yes he is helping people but what took him 4 hours would have only taken 1-2 hours doing it the right way. And to answer your question I'm new to RUclips so I haven't done any videos yet. Plus it doesn't matter if I do or not, but if you're going to help somebody you should help them the proper way not the way that's going to take forever to do a cost you time and money especially if you're trying to do this for a living in making money like most hobbyist do they try and sell stuff if it's going to take you four hours to make a product that probably cost a fortune to sell and nobody's gonna buy it, because you have to charge for the time it took to make that product.
Did you watch it? He actually discusses roughing cuts!
Yes I did watch it but the way he is doing it does not give you the greatest quality.
What is discussed is the "trenching cut" after which the 3mm bit is used entirely. It is bound to be faster with roughing cuts.
I am surprised by the detail in MDF. I always have trouble with thin sections breaking off while routing. Looks like a neat project. Do you sell these?
Does the aztec calendar that is behind you is machining in your router?, do you have the video?, congrats from México
Hi, yes the video is 150.
Australian Inventor Roger Clyde Webb
I want to turn the coolant on/off only when cutting is being done. How? Help?
Good work, but as per my knowledge I think, it needs to finish with 1mm ball nose cutter after the 3mm cutter.
if you look closely at the piece when he finished with the 6mm it still had lego ledges/minecraft looking steps in the piece...then he snaps to the finished and all the rounded humps are all nice and smooth. so either he spent 2 hours sanding it or he ran a 1mm cutter.
Hello Mr. What do you use the feed rate and Plunge rate.Can i use the mach3 for 3drelief?
Hi , see my videos from 153 to 159.
Australian Inventor Roger Clyde Webb ;-)
Toby Parkes s
You do some great work, I would love to get in to this but have very limited funds.
what make and model of CNC router do you use for this, if you don't mind me asking?
Pacific Tooling ships worldwide: Email me at: info@pacifictooling.com I will send you
information on our new * Lathe * and 4040, 6060, 6090 and 6012 (linear rail
model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225 . Pacific
Tooling; Australian Inventor Roger Clyde Webb ;-)
excellent
why?? if the range of velocity under the range of steps per unit in motor tuning the motor jerking and shifting the dimensions
What software do you use? Great work.
Hi, ArtCAM.
Australian Inventor Roger Clyde Webb
Rodger, Love the videos!! One suggestion, please upgrade your audio mike.
Great videos keep it up :)
Roger, what software do you use? and is it G Code compatible?
See videos, 169, 193, to 196. ArtCAM and yes G Code.
Pacific Tooling; Australian Inventor Roger Clyde Webb ;-)
how to know line number?
help me make direct Gcode for such operations
u have to fix the vacuum-cleaner
on the drilling-machine
i want this machine & training how to use..............
Hi, Email me at : info@pacifictooling.com I will send you information on our new Wood Lathe
and CNC routers, 4040, 6060, 6090 and 6012 (linear rail model).
Pacific Tooling, Australian Inventor Roger Clyde Webb
sir were do I buy a cnc
Hi, Email me at : info@pacifictooling.com I will send you information on our new Wood Lathes
and CNC routers, 4040, 6060, 6090 , 6012 , 1212, 1224, 1325 and now CNC 6040, 6090 , 1390 Lasers (linear rail model), and machine tool accessories . Pacific Tooling,
Australian Inventor Roger Clyde Webb
They are not flamingos. They are cranes.
price of the machine please...
Hi, see videos, 230; 231 for CNC routers and 232 for lasers on my RUclips channel, AND OR
Pacific Tooling ships worldwide: Email me at info@pacifictooling.com I will send you
information on our new * Lathe * and 4040, 6060, 6090 and 6012 (linear rail
model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225. USD only!!!
Pacific Tooling;
Australian Inventor Roger Clyde Webb
Sir Roger Webb, sir how much that kind of machine her in 🇵🇭. Thank you sir
Sir Roger Webb, sir how much that kind of machine her in 🇵🇭. Thank you sir
ur computer is reaaaallly 000OO00oooold
Hola buen día como puedo hacer para obtener información sobre la maquina. Como que maderas se pueden trabajar y hasta que dimensiones y lo esencial el precio y la entrega yo le escribo desde el ecuador
Pacific Tooling envía a todo el mundo: envíeme un correo electrónico a info@pacifictooling.com. Le enviaré
información sobre nuestro nuevo * Torno * y 4040, 6060, 6090 y 6012 (carril lineal
modelo) Routers CNC y láser CNC 6040, 6090, 1390 y 1225.
Pacific Tooling;
El inventor australiano Roger Clyde Webb
Hi Carlos,
Pacific Tooling ships worldwide: Email me at info@pacifictooling.com I will send you
information on our new * Lathe * and 4040, 6060, 6090 and 6012 (linear rail
model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225.
Pacific Tooling;
Australian Inventor Roger Clyde Webb
roger cool video.
Hi Roger, Good job. I'm french so my English is not very good, but I want to know the parameter of your CNC and the diameter of your Tools.
thanks
Hey Roger, Hope you use a face mask with that MDF its nasty stuff for your lungs :) gr8 video.
Lisa Lefteye 13155.mp4
the machine control software is from China right？ the name is维宏 hehehehehehe
the machine IS made ni china ???
You need to see more of my videos
Pacific Tooling ships worldwide: Email me at info@pacifictooling.com I will send you
information on our new * Lathe * and 4040, 6040, 6060, 6090 and 6012 (linear rail
model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225.
Pacific Tooling;
Australian Inventor Roger Clyde Webb