I do a lot of engine repair work as a hobbyist and a straight edge is your friend in situations like this. Use your feeler gauge and a straight edge and you can easily identify low spots in the cylinder/head/block without guessing where the issue is.
UTube is for clout and attention.if a problem comes about I just Fix it . I've done My work. I've forgotten what y'all are trying to learn!! I speak truth!! Real mechanic s read my knowledge and don't mess with me on here bc I agree with them as well!!
joe thanks for the inspiration ,just sucessfully rebuilt rancher and old school king quad.money saving tip...forget expensive wd 40,pb blaster. mix 50 50 acetone and trans fluid.put in old school oil can.spray on everything before disassembly.works great.. fav utuber.keep it up.
If you get any 5 valve Yamaha you wanna keep or that needs intake valves, put stainless valves in place of the Ti ones and you'll never have to adjust them again. I can't understand the push for titanium valves for just that tiny bit of hp gain. My raptor needed valves after like 100hrs. Couldn't believe it. Put stainless cheap ones in it and rode it many years before I sold it. Now at the shop, If I pull a head off a 5v Yamaha, it's getting stainless. I know this doesn't pertain to the coolant leak, but ya get what I'm saying. Best atv and dirt bike repair channel on RUclips hands down. Thanks man!!
Im always amazed by these negotiations. Here in eastern europe you can go down in price maybe 20% max. Not to mention you can only find here either beat up bikes or beat up bikes that look good and are overprized lol.
Great video that guy definitely drained the coolant and topped it off with fresh oil hoping you wouldn't notice I respect when people are just honest from the get go I think your doing the right thing rebuilding the way you are I know it is more expensive but you have peace of mind that way the guy looked after the quad ascetics but I think mechanically was to much for him nice it has new front tyres new front bumper be a nice quad when done is the chain okay on it just needs oiled hard to tell from the video nice to see vinny have a great week super looking forward to part 2 and the first ride have a smashing week Joe & vinny 👊💨
I bet he over heated it after he bought it from you and knew it needed a head gasket and changed the oil before you got there so it wasn't milky when you checked it
@@2vintage too rich won't cause overheating you just won't have good performance and you'll go through plugs if it's running lean then it overheat and even possible blow up
Mate, you are a true inspiration. It amazes me how well you take setbacks and just soldier on to success. Well done, your videos are a pure joy to watch! One of the best channels on RUclips, you deserve 10x the subscribers.
I love watching your videos, you explain stuff well and i learn by watching! One thing tho, get yourself a camera without zoom noise and a little better focus your videos deserve it!
Its a good idea to sand the head and cylinder surface on 600 grit sandpaper wet lying on a piece of flat glass to find the bad spots in the surface. If they arent that bad you can sand them flat without hurting anything. following a figure 8 pattern will make sure you wont create any high spots or low spots.
@1020 dart I think he's seeing his own patch up work is not All that great. he's literally pointing out his own mistakes. What a moron degrading himself is funny 😂😂😂😂
The number one thing I've learned watching ur channel is to be consistent on maintenence if only everyone else would do this there would be so many less basket cases lol dont get me wrong shit happens but maintenance or lack of is usually the culprit I'm talking regularly changing oil and filters greasing fittings also topping off fluids and using quality fluids also washing it with a power washer go a very long way protect ur investment and it will protect ur pocket!
@metoon3092 good point but not necessarily shit does crack and clutches fry out tires wear down go flat shit gets hooped but preventive maintenance goes a long way that's all.
yup alot of people buy quad or motor as toys and dont do any maintenance... you gotta do the same maintenance as you do to a car.. then again i dont maintain my car but do my quads cause i care more for them then my car if my car works its all good, a quad if it runs it will still have problems if you dont keep it running right
Hi joe think the seller knew mate what was wrong with it he sounded a bit iffy to me and the fact the oil looked perfect and clean said something was going down just shows some of these people will do anything to cover their mistakes I remember this quad and was mint when you sold it take care mate great vid as always 👍👌🔧🔧🔧
If it were me...I'd go n pay that guy a visit, get some more money back...then a few punches to his face n make him pick up his teeth...mabe he will think twice next time he wants to scam someone...I don't play games..dude would be in the hospital.
I'd replace the water pump impeller & key way.,or moon key way.,or just order in A new water pump for it to. That is the main issues that caused that to happen to that engine overheated from A bad water pump. Those engines are known for doing that Joe. Seriously if you replace part it'll run right again for you with no problems afterwards to.
KOR racing is where I'd send the head. Ken O'Connor racing. Best in the business. You also need a surfacing stone. I'm sure your aware of Michael sabo. His latest video talks about his surfacing table. It's a requirement imo
I totally thought the same thing, Michael was doing blaster cases, as much as Joe does he definitely needs one, plus a parts washer would be a good investment also, I watch time machines also and everything is cleaned spotless before being put back together.
Any real Mechanic would have fixed it the 1st time 😂 joe seen he just said screw it.its money for me in The Future rebuilds.its a no (brainer 😂) get it no brainer 😂😂 sad world of non genuine ppl sad I say
UTube is the only thing he's built.sure isn't anything else correctly!! He probably boosted his watch Time and viewers in the the beginning to get monitized. 😂
@@ofnaguycarlwatts8602 I would agree. I just went back to watch the first video he had on this Quad and the same exact problems are still there 1 year later. Pitted head and stripped cam shaft bolt. If he is decent man, he would give back all the money he sold it for to this guy he bought back from because the that guy only rode it 3 times. Hellva scam. I'm surprised he had the balls to post this video show of the same quad with the exact same problems Unsubscribed.
@@MAJorgy70 you said it Best. I will agree with everything you said. If ppl had the knowledge I do they would see right through his stupidity. I have now went onto modify ING my Ñitro engines.hell I have no successfully made my own connecting rods. I have just recently made my own tools to do repinching of the sleeve's for my Engine's. I have yet to see this Guy tune an engine properly and they are always noisy in the Top end.i watch for a good laugh!! It should title his stream's of how Not to do things and then it would make perfect.i have been some type of engine since the age of 13 and now 49. Glad someone is Smart enough to see it like I do. He should pay someone to fix it and Carry it back to the Guy.you can tell the guy was needing money and Joe Joe took advantage of him 2 times.its sad Bro sad!!
@@ofnaguycarlwatts8602 I see that he is naïve on things but I didn't think he was deceptive. This should be a wake call to everyone when buying from a private party. I guess that is why he brags about low balling sellers. 🤣 I watch Michael Sabo @ Basket Case Garage, he shows a lot of detail.
@@MAJorgy70 True man. He knew exactly 💯 percent of what he was doing in the very beginning.but to tell someone it's the crankshaft to get it cheaper. To scam him 2xs then to say that he got bamboozled.does he really think that we are that stupid?? He knew the head gasket was blown notice how Joe kept saying that the oil wasn't miilllllkkkkyyyy.key words.then have the balls to make another video of the same 4wheeler.i five it to him about work ethics and ambitious about working.but that's it . watch he want fix the stripped cam bolt he'll patch it sell it and probably buy it back again. He's only hurting himself. I will expose him.if he blocks me I'll come back again !!
Bummer that you didn't resurface the head the first time around. The pitting was present in the previous videos. Might have save the other guy the need to sell it back
It's like watching Deja vu of this same Quad he posted a year ago and the same problem that cause the blown head gasket. Also the same stripped out bolt for the cam shaft bearing is still there a year later.
@@reggiexp69 It's one thing if someone half assed fix something and to keep it for yourself and keep fixing that same problem again and again. It's entirely different when someone has the intentions to flip it, replace a part that may not need to be fixed, just to say they did something and COMPLETELY ignore the actual problem.
This is why my garage is full of 2-smokes!! Gunner to ride and low maintenance. We rip em all wkend, wash em, and put em back 44:08 in the trailer so they all are ready for our next ride
Yes the gasket on the carburetor.,or exhaust leak to. I think it's the water pump impeller.& Loosened up rockers from the initial break in reasons alone. It's A known fact that they can loosen up from those reasons.
Yeah bad head gaskets or cracked/microcracked cylinders and heads doesn't always mean coolant will mix into the oil or oil into the coolant. Funny you had it before and didn't realize it, go through so many vehicles & motos I've been waiting for/wondering if or when that'll to happen to me too lol. 🤙
Right guys. This one was clearly burning the coolant in the combustion chamber. There may be a leak at the water pump letting coolant into the oil. Joe should rebuild it and give it back for free!
feels like what our yfz450 has... no cooling in oil but coolant leaking on the out side of the engine... cause different head and we didnt resurface it...
Y’all are crazy… he had this thing it looks like 11 months ago. If you think it’s only been rode for a total of 15 minutes since then, I have some nice beach front property I’ll sell ya cheap here in WV.
I suspect the guy road it more than 15min, but I saw the videos 11 months ago. There is no way that quad should have been sent on down the road as a “fresh rebuild”. The head and water pump were just as trashed when he sold it as it is now.
Wasn't sure at first, but have come across in example of when motor turned off after running presumably hot then when turn off motor at first temp rises a little before cooling down had coolant leaking into 1 of cylinders then lose bit of coolant into cylinder but not mixing with oil, then start next day get a misfire on cold start, turn motor off then re start misfire goes away, never come across this before....
Dude probably overheated it and knew it, but on a side note, you rebuild enough stuff to get your moneys worth out of a surfacing stone. That would remove any doubts on the mating surfaces from now on.
@@ofnaguycarlwatts8602 dude, fuck off with your punk ass bullshit. you haven't done shit but run your cock holster since you showed up. On here acting like you know it all, but proving that you don't know shit. Lol What happened? Did Joe bone your girl or something?
Seems the seller was ok letting you analyze the problem without disclosure…he may have felt you had sold him a lemon…which may have been the case….anyhow..am sure you will spend whatever’s necessary…
I don't want to come off as a hater but you sold that guy a defective quad. This quad had the exact same problem as the first time you fixed it and all the comments told you to resurface the head but you didn't. He got 3 rides and it failed, at least it looked like you learned and are doing it properly this time plus your putting it on video which most people would not do. Still a great channel with good work overall.
Its a head gasket Im out 35:17.loooooooooooooooooooooooool watching from Parkdale Toronto Canada 1:30 Sunday afternoon having a beer. I am Canadian.. have you seen the Justin Trudeau Tampon commercial super accurate ..have a laugh...really enjoy your vids fellow brother in arms. My first bike was a MX 80 1979, age 14 I took it apart and put it back together just because ....
Those new style 4-stroke engines are all throwaways, from quads to MX bikes. A shame because it's an otherwise nice machine. Thanks for the cool video!
Joe there is always someone lying about something when they are trying to sell a bad quad or bike plus you could definitely tell in his voice that he was lying about something when you would ask him questions about stuff!!! I’m pretty sure he did say that he did change the oil in it though and if you listen in the video when you was asking him questions I don’t no about you but I could tell that he was lying about something!!! Why do people have to lye about something when they are selling something???? It definitely happens every day though!!!! Awesome video and I definitely can’t weight to see it put back together when you get all the new parts!!! So you was saying that it had a new rod in it was that done before you had owned it the first time or sometime when that guy had it???
Maybe check the height of the aftermarket rod, you noticed the piston looked high compared to the top of the cylinder. These engines are ready to pumped up and made too light weight for longevity. The Cylinder wall is too thin. Maybe look into detune it. (Lowering compression) ? And resurface the head!
That must have been awkward buying a quad from a guy that bought it and only ridden it 3 times then it broke down already. I bet he took a big lose at least a grand or 1500
@@reggiexp69 stepping stones of going broke in the end.nad karma want ever go away.lose everything you got and family suffers from dumbass mistakes like your comment!!
@@reggiexp69 honest money goes further than dirty money from crapping ppl out of their money. If you make a bad name for yourself with customers but wanna make yourself look good on UTube that's fine!!
I just went back to watch the first video he had on this Quad and the same exact problems are still there 1 year later. Pitted head and stripped cam shaft bolt. If he is decent man, he would give back all the money he sold it for to this guy he bought back from because the that guy only rode it 3 times. Hellva scam. I'm surprised he had the balls to post this video show of the same quad with the exact same problems Unsubscribed.
Awesome new gloves joe! What is your opinion on the grease monkey gloves? I definitely like them but soon as you get oil or water on em they get slick.
I would definitely resurface the head. But I'd say it was the head gasket for sure. And I had 2 of them heads and sold 1 a few months ago now I'm wishing i would have kept it
Ho Lee Chit Miss Molly. How bizarre that you owned it and sold it to him. You didn’t mention the timing sight covers that were overheated needing replaced in your estimate of parts where that magnet 🧲 went on the one. I’m following this one anxiously.
The water pump is what caused those issues with that four wheeler Joe. The impeller is worn out.,or there is A missing key way.,or moon key.,or the pump bearing is just shot out inside of that water pump altogether. Most likely it was the original one on it from the factory when it was sold new to.,or A replacement one that went bad over time to either one. It happens a lot on those types of engines though from Yamaha.& Suzuki & Honda & Polaris to all of them do it.
hey, just wondering if somebody could answer my question. at 21:39 , the reserve gaz was blue , but at 21:59 , the ON position gaz was like yellow... why ???
I wish I had the same negotiating skills that you do lol. I'm afraid to ask too low because a lot of people where I am are just rude. Its like well you don't know until you ask🤷♂️
Joe, you should create brand and mark in same local always for all your fix projects and let no know it's about the machine so if ever you come across your mark you might log and chart the fix 😉 so to never be bamboozled again. You do really good work Joe.
Bamboozled himself.told The guy it was the crank bad to get it cheaper.come to find out it was his own mistakes bit him in his arse!! But it wasn't a mistake he knew it was like the 1st time 😂😂😂 a real Mechanic can see Joe is scammer himself!!
love you man! keep the perfect work! you don't have anyone who works with a lathe in your area/country? I have in Portugal if you want but it would take long to arrive, fix and send back to you.
I think you should patch this Quad up Again. Bring it back to the Guy .Give 2k back to him so he can ride it again for 15min breaks down AGAIN! Then he can take it to a real certified Mechanic and get it fixed properly and get some enjoyment out of it for once!! That way it'll make him forget about that pain his Butt is feeling right now.then after he enjoys it and then gets tired of it. You can give 4k for it and have great running Quad that you can enjoy Riding without having to work on it again.mahahaha.only way you going to get a good running Quad that doesn't break down after 15 minutes. After it blows head gasket you can fix it by jetting it again. But oh I forgot it's got a bad crankshaft that's what said to the Guy 😂😂😂
Hey V2 what did you sell it to him for? And how much did you originally pay, plus what u put in to it before you sold it to him.I'm just wondering how much depreciation really happens because I'm new at this? And I don't want taken advantage of.
Seems to be he was trying to take someone for their money by changing oil and removing most of the coolant. I did that once on my camaro with blown head gasket because it wouldn't start with antifreeze in the cylinder. I didn't do it to fool a buyer though just to get it 1/2 mile home. That sucks but I know you'll fix it.
I thought copper coat would have worked. I have used it before. they say a sheet of glass and sandpaper is a flat surface. Years ago, I used to 100 percent. Copper head gaskets on an over milled two stroke head and doubled the head gaskets up. It ran great for many years with high octane fuel.
@@mark8111xx yeah for 15 minutes or so.i would fix them! Not patch them. He's scammed this guy for sure. I hate scammer's. Be honest at what you and it goes a long ways.joe don't realize what he's doing to himself.its called self distruction !! He don't see it at the moment. He's a hard working ambitious guy.so why not do it right the 1st time. Repetitive customer's is what you want not busting ppls wallets and their heads. 1 day he'll wind up with only UTube as employment no benefits to fall back on!! Watch and see!!
@@ofnaguycarlwatts8602 you still dint say what you would do differently, if it needs new valves he renews them, if it need new head he renews it, if it needs new cylinder he renews it, he replaces oil, coolant! Checked timing.. what would you do??
@@mark8111xx if it had stripped bolt or lose bolt. That's what caused even surfaces allowing it blow head gasket.watch video it speaks for itself. More to fixing something than just replacing parts. My 7 yr old can turn a bolt. but does that fix it. No. You're talking to a Guy that has bored his own engine's before here many many times.if it has blown head gasket you check all surface's for un even spots.if you pull a head off to replace piston You check everything. Be Bullet proof at what you do and you want shit ppl out of their money!!!! Joe did it 2 times.said it was a crankshaft problem.that has nothing to do with the head LMBO.scammed the guy.joe knew it 1st Time 😂😂😂 idiot's don't know nothing these Days!!
That damage to the cylinder head does not look like pitting it looks like mechanical like something got crunched in there it with a hammer some of that nature.
Have you ever thought that the water pump is bad on that four wheeler they do go out on them to Joe. It's not A normal thing though. Although they do go out.
I have not watched all of the video yet, but I just had to stop about 8 minutes in to remind you, just because there is no water on the oil doesn’t mean the head gasket is not blown
Thats sad dude knew it was 🍼🥛🥛 an didn't man up an just let u no I knew u would figure it out one way or another when u asked him about the oil he like yea I changed it but forgot to say it's Milky keep up the great work like what u do an learn something everytime I watch
R U for real. Joe knew exactly what was wrong with it.he built engine before duh.but no it was crankshaft bad causing head to leak. Joe took advantage of that Guy.rhey both are idiots for lying to each other.jow ripped him off not 1 time but twice.parhwric is what that is on Joe's part!! Karma is a B.... Watch and see what happens to this guy
Well, when Vinny came out into the garage, the first place he went was to the door. I think that by doing this he was indicating where his bathroom is, which is also known as “the head”. Vinny does it again!!! 😂
If I bought a quad from you and it ran forn15 min and blew up and you came to buy it I would have bashed the hell out of you and called you a cheat and all . He was way to nice he knows he did it
Did you put that head gasket in before??couldn't remember for sure but thought you rebuilt that top endwhen you had it initially. Got crap head gasket. Had a bad run on them a while back to.
I just bought a 2016 yzf450r, I went to change the oil and the oil has a slight silver sheen to it. Is that normal? The previous owner says he uses T6 Rotella oil. Bike runs fines and sounds fine.
I do a lot of engine repair work as a hobbyist and a straight edge is your friend in situations like this. Use your feeler gauge and a straight edge and you can easily identify low spots in the cylinder/head/block without guessing where the issue is.
Bro you wasting your time trying to explain that to a parts changer.thats mechanic terms you're using in here.
@OFNA GUY, Where is your youtube channel?
UTube is for clout and attention.if a problem comes about I just Fix it . I've done My work. I've forgotten what y'all are trying to learn!! I speak truth!! Real mechanic s read my knowledge and don't mess with me on here bc I agree with them as well!!
@@rustrenegade8191 lmao this dudes just an overconfident clown.
@@shanewilliams8768 also wonder why he would be watching us mere mortals, since he clearly has seen and done it all 😂
Hey Joe I noticed a loose exhaust clamp moving around on the throttle side when you first started it. Good luck man, love the vids!
joe thanks for the inspiration ,just sucessfully rebuilt rancher and old school king quad.money saving tip...forget expensive wd 40,pb blaster. mix 50 50 acetone and trans fluid.put in old school oil can.spray on everything before disassembly.works great.. fav utuber.keep it up.
If the guy got to ride it for 15 minutes,it couldn’t have been THAT solid 🤦🏻 you got balls,I’ll give ya that!
Joe sold it to the guy lmaooo
If you get any 5 valve Yamaha you wanna keep or that needs intake valves, put stainless valves in place of the Ti ones and you'll never have to adjust them again. I can't understand the push for titanium valves for just that tiny bit of hp gain. My raptor needed valves after like 100hrs. Couldn't believe it. Put stainless cheap ones in it and rode it many years before I sold it. Now at the shop, If I pull a head off a 5v Yamaha, it's getting stainless. I know this doesn't pertain to the coolant leak, but ya get what I'm saying. Best atv and dirt bike repair channel on RUclips hands down. Thanks man!!
Im always amazed by these negotiations. Here in eastern europe you can go down in price maybe 20% max. Not to mention you can only find here either beat up bikes or beat up bikes that look good and are overprized lol.
Resurface the head and cylinder on a flat surface using sandpaper. Color the surface with a marker to see low spots.
Great video that guy definitely drained the coolant and topped it off with fresh oil hoping you wouldn't notice I respect when people are just honest from the get go I think your doing the right thing rebuilding the way you are I know it is more expensive but you have peace of mind that way the guy looked after the quad ascetics but I think mechanically was to much for him nice it has new front tyres new front bumper be a nice quad when done is the chain okay on it just needs oiled hard to tell from the video nice to see vinny have a great week super looking forward to part 2 and the first ride have a smashing week Joe & vinny 👊💨
I bet he over heated it after he bought it from you and knew it needed a head gasket and changed the oil before you got there so it wasn't milky when you checked it
I was thinking the same thing
Over heated it bc this guy had the jetting off as he said in a video
@@theyzoomers jetting was rich actually
@@2vintage too rich won't cause overheating you just won't have good performance and you'll go through plugs if it's running lean then it overheat and even possible blow up
2vintage Duncan racing does great machining and port work possibly head repair get up with them hope this helps 🤟
Mate, you are a true inspiration. It amazes me how well you take setbacks and just soldier on to success. Well done, your videos are a pure joy to watch! One of the best channels on RUclips, you deserve 10x the subscribers.
I started making videos working on my quads. This dude really inspired me to do that learned so much
I love watching your videos, you explain stuff well and i learn by watching! One thing tho, get yourself a camera without zoom noise and a little better focus your videos deserve it!
Its a good idea to sand the head and cylinder surface on 600 grit sandpaper wet lying on a piece of flat glass to find the bad spots in the surface. If they arent that bad you can sand them flat without hurting anything. following a figure 8 pattern will make sure you wont create any high spots or low spots.
Drinking game for this video: Take a shot every time Joe says milky
I'm from Louisiana and can drink like a whale, but be real bro........................ I'm 10 hrs late how many died of alcohol poisoning?
Or huh…
I know I was wanting to yell threw the screen he changed the damn oil it's not gonna be milky its fresh and hasn't ran since
@@ALDA2479 grasshopper's can't see lie's bc they tell them themselves.they believe lie's bc they creating alongside of them 😂😆😂😂😂
@1020 dart I think he's seeing his own patch up work is not All that great. he's literally pointing out his own mistakes. What a moron degrading himself is funny 😂😂😂😂
The number one thing I've learned watching ur channel is to be consistent on maintenence if only everyone else would do this there would be so many less basket cases lol dont get me wrong shit happens but maintenance or lack of is usually the culprit I'm talking regularly changing oil and filters greasing fittings also topping off fluids and using quality fluids also washing it with a power washer go a very long way protect ur investment and it will protect ur pocket!
If they maintained it, we wouldn't see this video!
@metoon3092 good point but not necessarily shit does crack and clutches fry out tires wear down go flat shit gets hooped but preventive maintenance goes a long way that's all.
yup alot of people buy quad or motor as toys and dont do any maintenance... you gotta do the same maintenance as you do to a car..
then again i dont maintain my car but do my quads cause i care more for them then my car if my car works its all good, a quad if it runs it will still have problems if you dont keep it running right
Hi joe think the seller knew mate what was wrong with it he sounded a bit iffy to me and the fact the oil looked perfect and clean said something was going down just shows some of these people will do anything to cover their mistakes I remember this quad and was mint when you sold it take care mate great vid as always 👍👌🔧🔧🔧
If it were me...I'd go n pay that guy a visit, get some more money back...then a few punches to his face n make him pick up his teeth...mabe he will think twice next time he wants to scam someone...I don't play games..dude would be in the hospital.
I'd replace the water pump impeller & key way.,or moon key way.,or just order in A new water pump for it to. That is the main issues that caused that to happen to that engine overheated from A bad water pump. Those engines are known for doing that Joe. Seriously if you replace part it'll run right again for you with no problems afterwards to.
KOR racing is where I'd send the head. Ken O'Connor racing. Best in the business. You also need a surfacing stone. I'm sure your aware of Michael sabo. His latest video talks about his surfacing table. It's a requirement imo
I totally thought the same thing, Michael was doing blaster cases, as much as Joe does he definitely needs one, plus a parts washer would be a good investment also, I watch time machines also and everything is cleaned spotless before being put back together.
Any machine shop should be able to repair that head. They'll just weld in that gap and resurface it. Call around local to you.
Any real Mechanic would have fixed it the 1st time 😂 joe seen he just said screw it.its money for me in The Future rebuilds.its a no (brainer 😂) get it no brainer 😂😂 sad world of non genuine ppl sad I say
@@ofnaguycarlwatts8602 my god.. give it a rest. If you dint like him why do you subscribe??
You should be really proud of what you've built here on YT! 👍
UTube is the only thing he's built.sure isn't anything else correctly!! He probably boosted his watch Time and viewers in the the beginning to get monitized. 😂
@@ofnaguycarlwatts8602 I would agree. I just went back to watch the first video he had on this Quad and the same exact problems are still there 1 year later. Pitted head and stripped cam shaft bolt.
If he is decent man, he would give back all the money he sold it for to this guy he bought back from because the that guy only rode it 3 times.
Hellva scam. I'm surprised he had the balls to post this video show of the same quad with the exact same problems
Unsubscribed.
@@MAJorgy70 you said it Best. I will agree with everything you said. If ppl had the knowledge I do they would see right through his stupidity. I have now went onto modify ING my Ñitro engines.hell I have no successfully made my own connecting rods. I have just recently made my own tools to do repinching of the sleeve's for my Engine's. I have yet to see this Guy tune an engine properly and they are always noisy in the Top end.i watch for a good laugh!! It should title his stream's of how Not to do things and then it would make perfect.i have been some type of engine since the age of 13 and now 49. Glad someone is Smart enough to see it like I do. He should pay someone to fix it and Carry it back to the Guy.you can tell the guy was needing money and Joe Joe took advantage of him 2 times.its sad Bro sad!!
@@ofnaguycarlwatts8602 I see that he is naïve on things but I didn't think he was deceptive.
This should be a wake call to everyone when buying from a private party.
I guess that is why he brags about low balling sellers. 🤣
I watch Michael Sabo @ Basket Case Garage, he shows a lot of detail.
@@MAJorgy70 True man. He knew exactly 💯 percent of what he was doing in the very beginning.but to tell someone it's the crankshaft to get it cheaper. To scam him 2xs then to say that he got bamboozled.does he really think that we are that stupid?? He knew the head gasket was blown notice how Joe kept saying that the oil wasn't miilllllkkkkyyyy.key words.then have the balls to make another video of the same 4wheeler.i five it to him about work ethics and ambitious about working.but that's it . watch he want fix the stripped cam bolt he'll patch it sell it and probably buy it back again. He's only hurting himself. I will expose him.if he blocks me I'll come back again !!
Bummer that you didn't resurface the head the first time around. The pitting was present in the previous videos. Might have save the other guy the need to sell it back
I got a 2006 yfz450 special edition for 13 that needed a valve job. Definitely my best purchase
You'r videos are so good man keep up the good work!👏👏
I’m currently at 6:02, I predict the seller replaced the oil when it was milky based on the way he responded. Didn’t sound very convincing
It's like watching Deja vu of this same Quad he posted a year ago and the same problem that cause the blown head gasket. Also the same stripped out bolt for the cam shaft bearing is still there a year later.
i guess some quads are just a lemon..
@@reggiexp69 It's one thing if someone half assed fix something and to keep it for yourself and keep fixing that same problem again and again.
It's entirely different when someone has the intentions to flip it, replace a part that may not need to be fixed, just to say they did something and COMPLETELY ignore the actual problem.
@@MAJorgy70 yup...
This is why my garage is full of 2-smokes!! Gunner to ride and low maintenance. We rip em all wkend, wash em, and put em back 44:08 in the trailer so they all are ready for our next ride
Yes the gasket on the carburetor.,or exhaust leak to. I think it's the water pump impeller.& Loosened up rockers from the initial break in reasons alone. It's A known fact that they can loosen up from those reasons.
Yeah bad head gaskets or cracked/microcracked cylinders and heads doesn't always mean coolant will mix into the oil or oil into the coolant. Funny you had it before and didn't realize it, go through so many vehicles & motos I've been waiting for/wondering if or when that'll to happen to me too lol. 🤙
head gaskets have an exhaust side and the coolant side I have seen many head gaskets blow without putting coolant in oil 💯💯
Right guys. This one was clearly burning the coolant in the combustion chamber. There may be a leak at the water pump letting coolant into the oil. Joe should rebuild it and give it back for free!
feels like what our yfz450 has... no cooling in oil but coolant leaking on the out side of the engine... cause different head and we didnt resurface it...
Millennium Technologies is a good place to send you’re heads off to. They did great work for me with a yz 250 head
You put a bad gasket on head when you built it last time you had it... happens, no issues.
Check the Chain Sprocket on the Axle. When starting the machine it was moving like its loose.
If U let the Quad down from the right, you can control the decent with the front brake. : )
Y’all are crazy… he had this thing it looks like 11 months ago. If you think it’s only been rode for a total of 15 minutes since then, I have some nice beach front property I’ll sell ya cheap here in WV.
I got some in Arizona.😁
I suspect the guy road it more than 15min, but I saw the videos 11 months ago. There is no way that quad should have been sent on down the road as a “fresh rebuild”. The head and water pump were just as trashed when he sold it as it is now.
@@billd.akaevylaz754 Joe doesn't realize what he is doing to himself Brother Man!!
Love the channel, Top Dollar - better not need a thing. I hate discussing repairs with you? "Uh, I put in a spark plug, and changed the oil."
I think you should fix it and give it back to the guy you had over the first time.
thats what i was thinking. poor guy probly bout it off him for about 4500.
I second that
Its up for sale again!!
The guy said he only rode it 3 times in a year for a total of 15 minutes bs
Give it back? He'll no, the guy ran it into the ground, then put fresh oil into before Joe got there!
Joe is nobody's fool.
Stripped bolts inside the engine that was you 😂😂
good one
Sabo has a surfacing block. They arent too expensive. Be worth having one around the shop.
Love the channel, Wow great quad. The hardest-working man in Wisconsin, except for Aaron Rodgers
Do the head yourself..wet and dry paper 800s on a piece of glass so it's flat and bit by bit sand it flat..easy
Wasn't sure at first, but have come across in example of when motor turned off after running presumably hot then when turn off motor at first temp rises a little before cooling down had coolant leaking into 1 of cylinders then lose bit of coolant into cylinder but not mixing with oil, then start next day get a misfire on cold start, turn motor off then re start misfire goes away, never come across this before....
Dude probably overheated it and knew it, but on a side note, you rebuild enough stuff to get your moneys worth out of a surfacing stone. That would remove any doubts on the mating surfaces from now on.
He's too stupid to use it bro!!
@@ofnaguycarlwatts8602 dude, fuck off with your punk ass bullshit. you haven't done shit but run your cock holster since you showed up. On here acting like you know it all, but proving that you don't know shit. Lol
What happened? Did Joe bone your girl or something?
The valves should have been correct because you worked on it last correct ???
It takes onions to post this video. Reminds me of the used car places in the ghetto.
Seems the seller was ok letting you analyze the problem without disclosure…he may have felt you had sold him a lemon…which may have been the case….anyhow..am sure you will spend whatever’s necessary…
The black valve on intake looks like it has a gap 42:12. Alway's put a straight edge on head, if there's a gap feeler gauge it
I don't want to come off as a hater but you sold that guy a defective quad. This quad had the exact same problem as the first time you fixed it and all the comments told you to resurface the head but you didn't. He got 3 rides and it failed, at least it looked like you learned and are doing it properly this time plus your putting it on video which most people would not do. Still a great channel with good work overall.
Those impellers works just like A outboard boat motor does that's 2 stroke.& 4 stroke to.
So that's how long a 2vintage repair will last, 3 rides...
Pretty long for how shitty he is wrenching, monkey with a wrench basically , always very fun to watch how sloppy he does everything
Its a head gasket Im out 35:17.loooooooooooooooooooooooool watching from Parkdale Toronto Canada 1:30 Sunday afternoon having a beer. I am Canadian.. have you seen the Justin Trudeau Tampon commercial super accurate ..have a laugh...really enjoy your vids fellow brother in arms. My first bike was a MX 80 1979, age 14 I took it apart and put it back together just because ....
It’s the jubilee clip on the exhaust making the rattling sound
That rattle is the clamp on the exhaust pipe
Those new style 4-stroke engines are all throwaways, from quads to MX bikes. A shame because it's an otherwise nice machine.
Thanks for the cool video!
throw it away then what?
@@bubster1981 go buy a new one. They are junk.
It’s hard to tell on camera but I thought the clicking sound was actually the loose clamp rattling on the exhaust.
Joe there is always someone lying about something when they are trying to sell a bad quad or bike plus you could definitely tell in his voice that he was lying about something when you would ask him questions about stuff!!! I’m pretty sure he did say that he did change the oil in it though and if you listen in the video when you was asking him questions I don’t no about you but I could tell that he was lying about something!!! Why do people have to lye about something when they are selling something???? It definitely happens every day though!!!! Awesome video and I definitely can’t weight to see it put back together when you get all the new parts!!! So you was saying that it had a new rod in it was that done before you had owned it the first time or sometime when that guy had it???
Maybe check the height of the aftermarket rod, you noticed the piston looked high compared to the top of the cylinder. These engines are ready to pumped up and made too light weight for longevity. The Cylinder wall is too thin. Maybe look into detune it. (Lowering compression) ? And resurface the head!
wassup joe, keep up the good work brother
That must have been awkward buying a quad from a guy that bought it and only ridden it 3 times then it broke down already. I bet he took a big lose at least a grand or 1500
That's the idea and tactical practice here in the screw ppl it's all about me Gayrage!!
@@ofnaguycarlwatts8602 buy fix resell and then buy again cheap and fix again and sell again easy money
@@reggiexp69 stepping stones of going broke in the end.nad karma want ever go away.lose everything you got and family suffers from dumbass mistakes like your comment!!
@@ofnaguycarlwatts8602 hahah :)
@@reggiexp69 honest money goes further than dirty money from crapping ppl out of their money. If you make a bad name for yourself with customers but wanna make yourself look good on UTube that's fine!!
I just went back to watch the first video he had on this Quad and the same exact problems are still there 1 year later. Pitted head and stripped cam shaft bolt.
If he is decent man, he would give back all the money he sold it for to this guy he bought back from because the that guy only rode it 3 times.
Hellva scam. I'm surprised he had the balls to post this video show of the same quad with the exact same problems
Unsubscribed.
Awesome new gloves joe! What is your opinion on the grease monkey gloves? I definitely like them but soon as you get oil or water on em they get slick.
I like them!
They are for vagina's!!
Just machine it, it'll be fine. Very minimal damage. burning coolant cleaned carbon off parts real good.
I would definitely resurface the head. But I'd say it was the head gasket for sure. And I had 2 of them heads and sold 1 a few months ago now I'm wishing i would have kept it
Ho Lee Chit Miss Molly. How bizarre that you owned it and sold it to him. You didn’t mention the timing sight covers that were overheated needing replaced in your estimate of parts where that magnet 🧲 went on the one. I’m following this one anxiously.
You might get lucky by just changing the impeller inside of that water pump.& The moon key way.,or just key way inside of it.
The water pump is what caused those issues with that four wheeler Joe. The impeller is worn out.,or there is A missing key way.,or moon key.,or the pump bearing is just shot out inside of that water pump altogether. Most likely it was the original one on it from the factory when it was sold new to.,or A replacement one that went bad over time to either one. It happens a lot on those types of engines though from Yamaha.& Suzuki & Honda & Polaris to all of them do it.
Watch the videos Joe did on this quad 11 months ago. Joe replaced the water pump and it leaked on the test ride. LMAO
These videos are my therapy
So you sold this quad to this guy that road it 3 times and all this shit is wrong ? How do you explain this ? Valves on intake double specs ?
Check out millennium technologies there in Wisconsin. They can fix that head, re-plate cylinders and just about everything else you could ever need.
Yeah, that place looks like the way to go
Crazy paid more for the second time godda love
hey, just wondering if somebody could answer my question. at 21:39 , the reserve gaz was blue , but at 21:59 , the ON position gaz was like yellow... why ???
I wish I had the same negotiating skills that you do lol. I'm afraid to ask too low because a lot of people where I am are just rude. Its like well you don't know until you ask🤷♂️
Joe, you should create brand and mark in same local always for all your fix projects and let no know it's about the machine so if ever you come across your mark you might log and chart the fix 😉 so to never be bamboozled again. You do really good work Joe.
Bamboozled himself.told The guy it was the crank bad to get it cheaper.come to find out it was his own mistakes bit him in his arse!! But it wasn't a mistake he knew it was like the 1st time 😂😂😂 a real Mechanic can see Joe is scammer himself!!
love you man! keep the perfect work! you don't have anyone who works with a lathe in your area/country? I have in Portugal if you want but it would take long to arrive, fix and send back to you.
Well. at least you saved a little $$ money on vehicle registration with the 2024 sticker 😉 Good fix Bro.
Joe's Big word of the year!! Drum roll plz. Wait for it ? Miilllllkkkkyyyy! There I made a big word for you !! Out of milk!!
Clean up that pitting, put high heat epoxy on it surface it pit new gasket on, should work fine.
I think you should patch this Quad up Again. Bring it back to the Guy .Give 2k back to him so he can ride it again for 15min breaks down AGAIN! Then he can take it to a real certified Mechanic and get it fixed properly and get some enjoyment out of it for once!! That way it'll make him forget about that pain his Butt is feeling right now.then after he enjoys it and then gets tired of it. You can give 4k for it and have great running Quad that you can enjoy Riding without having to work on it again.mahahaha.only way you going to get a good running Quad that doesn't break down after 15 minutes. After it blows head gasket you can fix it by jetting it again. But oh I forgot it's got a bad crankshaft that's what said to the Guy 😂😂😂
I would have ran him off when I realized he was the one I bought it from. You could tell at the end of the original video that it wasn't right.
@@garyrobinson219 I hate when ppl crapp ppl out of money!! I would of too. I probably would have rearranged body parts for him . 😂
Hey V2 what did you sell it to him for? And how much did you originally pay, plus what u put in to it before you sold it to him.I'm just wondering how much depreciation really happens because I'm new at this? And I don't want taken advantage of.
Always check all fluids on pre-owned equipment prior to running for any amount if time..
Seems to be he was trying to take someone for their money by changing oil and removing most of the coolant. I did that once on my camaro with blown head gasket because it wouldn't start with antifreeze in the cylinder. I didn't do it to fool a buyer though just to get it 1/2 mile home. That sucks but I know you'll fix it.
I'm pretty sure you can get a newer head for it whatever year
I thought copper coat would have worked. I have used it before. they say a sheet of glass and sandpaper is a flat surface. Years ago, I used to 100 percent. Copper head gaskets on an over milled two stroke head and doubled the head gaskets up. It ran great for many years with high octane fuel.
That's bc you fixed it with knowledgeable tactics.patch jobs around here.Not Quality rebuilds or repairs
@@ofnaguycarlwatts8602 what would you do differently.. the bikes he fixes run
@@mark8111xx yeah for 15 minutes or so.i would fix them! Not patch them. He's scammed this guy for sure. I hate scammer's. Be honest at what you and it goes a long ways.joe don't realize what he's doing to himself.its called self distruction !! He don't see it at the moment. He's a hard working ambitious guy.so why not do it right the 1st time. Repetitive customer's is what you want not busting ppls wallets and their heads. 1 day he'll wind up with only UTube as employment no benefits to fall back on!! Watch and see!!
@@ofnaguycarlwatts8602 you still dint say what you would do differently, if it needs new valves he renews them, if it need new head he renews it, if it needs new cylinder he renews it, he replaces oil, coolant! Checked timing.. what would you do??
@@mark8111xx if it had stripped bolt or lose bolt. That's what caused even surfaces allowing it blow head gasket.watch video it speaks for itself. More to fixing something than just replacing parts. My 7 yr old can turn a bolt. but does that fix it. No. You're talking to a Guy that has bored his own engine's before here many many times.if it has blown head gasket you check all surface's for un even spots.if you pull a head off to replace piston
You check everything. Be Bullet proof at what you do and you want shit ppl out of their money!!!! Joe did it 2 times.said it was a crankshaft problem.that has nothing to do with the head LMBO.scammed the guy.joe knew it 1st Time 😂😂😂 idiot's don't know nothing these Days!!
I appreciate the content.
joe ,but he seemed like a nice ,honest boy . lol here we go again. but you did fine.
great diagnostic..
well done. I love this machine!
The water pump impeller isn't spinning inside of the water pump do to A shred off key.,or rolled pin inside of it.
When asked a Question & someone Hesitates You know It's Not gonna be *a straight forward answer.* LOL
That damage to the cylinder head does not look like pitting it looks like mechanical like something got crunched in there it with a hammer some of that nature.
Have you ever thought that the water pump is bad on that four wheeler they do go out on them to Joe. It's not A normal thing though. Although they do go out.
Guy ain't got a clue in hell about that thing...nice pick!!
I have not watched all of the video yet, but I just had to stop about 8 minutes in to remind you, just because there is no water on the oil doesn’t mean the head gasket is not blown
I think it just sat so long the coolant and the oil separated that's why it didn't look milky when you first checked it.
Thats sad dude knew it was 🍼🥛🥛 an didn't man up an just let u no I knew u would figure it out one way or another when u asked him about the oil he like yea I changed it but forgot to say it's Milky keep up the great work like what u do an learn something everytime I watch
R U for real. Joe knew exactly what was wrong with it.he built engine before duh.but no it was crankshaft bad causing head to leak. Joe took advantage of that Guy.rhey both are idiots for lying to each other.jow ripped him off not 1 time but twice.parhwric is what that is on Joe's part!! Karma is a B.... Watch and see what happens to this guy
I got that same 06 special edition. I'm only the second owner, but I'm selling it for a new sled
Those are infamous for water pump seals, head etc may be fine...
Well, when Vinny came out into the garage, the first place he went was to the door. I think that by doing this he was indicating where his bathroom is, which is also known as “the head”. Vinny does it again!!! 😂
If I bought a quad from you and it ran forn15 min and blew up and you came to buy it I would have bashed the hell out of you and called you a cheat and all . He was way to nice he knows he did it
Please stop manipulating the ring gap!! Use the piston.. you know the deal. Still good vids👍👍
I have the exact year and model and the exact problem coolant in the oil
Did you put that head gasket in before??couldn't remember for sure but thought you rebuilt that top endwhen you had it initially. Got crap head gasket. Had a bad run on them a while back to.
Ya only drove it 3 times on Sunday to church
I just bought a 2016 yzf450r, I went to change the oil and the oil has a slight silver sheen to it. Is that normal? The previous owner says he uses T6 Rotella oil. Bike runs fines and sounds fine.