Nordson ProBlue Melter how replace pressure valve, cómo reemplazar la válvula de presión.

Поделиться
HTML-код
  • Опубликовано: 15 ноя 2024
  • НаукаНаука

Комментарии • 36

  • @ing.jonathanbravo
    @ing.jonathanbravo 2 месяца назад +1

    Buenas noches, cada cuanto tiempo es recomendable realizar mantenimiento en el deposito de cola y en el sistema, gracias

    • @RaybritoPCServices
      @RaybritoPCServices  2 месяца назад +1

      @@ing.jonathanbravo depende del uso, nosotros lo hacemos cada 6 meses, gracias

    • @ing.jonathanbravo
      @ing.jonathanbravo 2 месяца назад

      @@RaybritoPCServicesmuchas gracias, saludos

  • @RaceForGoodLife
    @RaceForGoodLife 2 года назад +1

    we had this issue this morning! thanks for sharing, now we need to replace the pressure discharge valve.

  • @2rb172
    @2rb172 8 месяцев назад +1

    Former Nordson tech here. You dont have to remove the pump i order to identify a bad discharge valve. just see if the glue is returning to the tank through the return port in top of the tank behind the grate.If you see pulsing glue here then replace the valve. The valve can be changed with glue in the tank.just make sure that the level in the tank is below the level of the valve.

    • @RaybritoPCServices
      @RaybritoPCServices  8 месяцев назад

      Thank you, you are correct.

    • @isammohamed7970
      @isammohamed7970 6 месяцев назад

      ⁠@@RaybritoPCServices j’ais un probleme au niveaux du reservoir la col sa sort non plus dans les tuyaux

  • @pablorodriguez9046
    @pablorodriguez9046 Год назад +1

    You never showed the replacement of the valve and your pump needs service. the glue is coming out through the piston. This means that a pump service kit is needed. There are nordson manuals on line for anyone to download. good video

    • @RaybritoPCServices
      @RaybritoPCServices  Год назад

      No tenia una bomba nueva ni el regulador, las canbie con partes usadas, y estas en lo correcto enl8nea esta el manual, gracias. 🙂

  • @ing.jonathanbravo
    @ing.jonathanbravo 2 года назад +2

    Good morning, excellent video, the handpiece that you lift in the minute4:52 what function does it have, thanks for the answe.

    • @RaybritoPCServices
      @RaybritoPCServices  2 года назад +1

      That is a locking lever, its just to allow you to remove the pump assembly.

    • @ing.jonathanbravo
      @ing.jonathanbravo 2 года назад +2

      @@RaybritoPCServices I thought it blocked the exit of the queue to remove the bomb

    • @RaybritoPCServices
      @RaybritoPCServices  2 года назад

      @@ing.jonathanbravo well at first I thought the same, but its just to lock the pump, saludos

    • @ing.jonathanbravo
      @ing.jonathanbravo 2 года назад

      @@RaybritoPCServices I have the same problem with the machine, the pump does not hold pressure, There is no way to repair this valve.

    • @ing.jonathanbravo
      @ing.jonathanbravo 2 года назад

      La bomba tiene el mismo funcionamiento que en el video, retire la bomba verifique los vedantes, retire y limpie los dos plomitos que lleva el el sistema de la bomba, la volvi a colocar y la cola no llega hasta la purga, retiro el filtro y esta sin cola, tendre que colocar esta valvula de presion.

  • @hummamalshibli9191
    @hummamalshibli9191 Год назад +1

    I have the same system as this device. Glue does not come out of the valve when operating. It goes out 1 minute after turning on and then stops. I cleaned and checked the air valve and the problem didn't go away. Both valves in the device are not working. Can you help me thank you

    • @RaybritoPCServices
      @RaybritoPCServices  Год назад

      Remove and clean the filter, after check the pneumatic pomp

    • @hummamalshibli9191
      @hummamalshibli9191 Год назад

      @@RaybritoPCServices do you have any videos about this

    • @hummamalshibli9191
      @hummamalshibli9191 Год назад

      @@RaybritoPCServices The electrical ground line, if it is present in the institutional device

    • @hummamalshibli9191
      @hummamalshibli9191 Год назад

      @@RaybritoPCServices We checked the air and cleaned all the required places for you

    • @RaybritoPCServices
      @RaybritoPCServices  Год назад

      @@hummamalshibli9191 no

  • @hummamalshibli9191
    @hummamalshibli9191 Год назад +1

    Do you want to turn on the ground machine

  • @gabrielteixeira8813
    @gabrielteixeira8813 Год назад +1

    very very very thank you !!!!!!!!!

  • @newbieduckyelectronics4085
    @newbieduckyelectronics4085 2 года назад +1

    Can share the troubleshoot sheet?

    • @RaybritoPCServices
      @RaybritoPCServices  2 года назад

      I do not longer have it, but do google search you will find it, or find your nordson manual.,Thanks

  • @kappachinnaya7403
    @kappachinnaya7403 Год назад

    Veery Very nice