P1101 on a 2013 Chevy Malibu Fixed by Cleaning Throttle Body
HTML-код
- Опубликовано: 12 июл 2024
- P1101 on a 2013 Chevy Malibu fixed by Cleaning Throttle body. How to fix code p1101 on a Chevy Malibu 2013-2016. How to clean a throttle body on a Chevy Malibu and Cadillac ATS 2.0t. How to Remove and Reinstall a Throttle Body on a Chevy Malibu. How to Perform a Throttle body relearn on a Chevy. Code P1101 Intake Air Flow Performance Malfunction, what to check and how to fix it. How to Remove Tube Connected to Throttle body on a Chevy Malibu.
Throttle Body Cleaner - amzn.to/3eLV7bl
Cleaning Brush - amzn.to/3tT81Zw
Gray Scotch Brite Pads - amzn.to/2SSZngX
MAF Sensor - amzn.to/3yfdlty
Backyard Chevy is a participant in the amazon affiliates program. As an Amazon Associate I earn from qualifying purchases
I assume no liability for anything you choose to do to your own car. Due to factors beyond my control, All Repairs you perform to your car are performed at your own risk. I assume no liability for property damage or injury incurred as a result of any information contained in this video. Use this information at your own risk. 
Авто/Мото
Thanks for the video. It works, i just did that to my 2016 Malibu. Everything is good now, engine light gone. Thanks again.
Thats awesome! Great job🙂👍
I maintain my son's 2013 Malibu with a 2.5L NA engine. This video gives me confidence that I can remove and reinstall the throttle body even though I'm an inexperienced DIY'er. The Amazon links are very helpful. Thank you for your clear instructions in this and all your other videos!
So glad to be able to help🙂 thank you
Top shelf video. There aren't a lot of moving around, shaky, and dark video shots. We could definitely learn cars and production from watching your content.
Great video.
Thank you🙂
2015 Malibu 2ltz is idling low while stopped like it’s wants to die. I’m sure this will fix the issue. Thank you for the video.
Did it fix it?
Thank you so much excellent video , I can remove and reinstall the throttle body ,engine light is gone my 2013 chevy malibu 2.0 turbo.
Thank you 🙏
Anytime🙂 thank you for the support
I'll be using this video today . It looks hard to reach the malibu, unlike my tahoe
Yea that ones definitely harder to reach than the tahoe's...hopefully all goes well...good luck🙂👍
It is a very good idea an least expensive it work for me you have to remember it's a 2008 cheve
Thats great!
Hola !
Tengo problemas para quitar el tubo con rosca , que otra opción tengo ?
Can you make a new video on 2014 Chevy Malibu LT showing exactly which screws to remove (POV) please? My throttle body needs cleaning bc my Malibu is starting to kick/hesitate..
I did this today on a 2.5 liter, same year. No code, but would stall when idle at a light. This fixed the issue. 🚗
Thats awesome...so glad to hear it🙂👍
Mine is doing the same thing. No code but stalling, replaced the VTT solenoid and that did not fix it. Going to give this a try.
Can you a video on cleaning a throttle body of Chevy Malibu 2014 step by step please
It would be the same process as long as its the same engine the 2.0t
Hey, I took mine off but it wouldn't close all the way after cleaning it, did I not clean it right and do you need to calibrate it when you put back on? Thanks and nice video.
Did u clean it on the car or off the car? Was the electrical still connected if on the car? I believe i mentioned the calibration steps but theyre just a few turn on and idle for a few then turn off steps
@@backyardchevy328 I removed it like you did in the video, but before I did anything I disconnected the battery. Mine is a 2015 Chevy Malibu Ls, the throttle body is in the same spot. Thanks for responding.
@@Htown713southside was it stuck open the same way before cleaning or it happened after?
@@backyardchevy328 I believe it happened after, I'm not so sure, because there was oil gunk right where it was opened so I assumed cleaning that would close it but it didn't. But I'll check it again today during the day. I really don't want to buy another one but if I can't fix it then I have too.
@@Htown713southside hopefully u can..normally when u connect the power back up itll close it..maybe doing that u can see if it closed it
Where can i find those retaining clips
Wait a min!! Aint no way its that easy!? Lol The Chevy dealer saying my wifes car needs fuel injection and throttle body clenaing, and this is all they would do for 200 dollars!!?
I change the mass air flow sensor after check engine light. Car was jerking some when taking off at lights, hesitation & just notice once changed it all was good. 48 hrs & then it through another engine light. P1101 .. AutoZone..recomend tal
deice air intake ... Our filter was extremely dirty. Didn't find any leaks or. Blockage. Car is running fine. I changed air filter... But light still on ... Is there a way to reset? Can a really bad airfilter do this??
We homeless. Are car is our home. & no family so this really hitting us with money we've manage to save from doordashing.
To reset it..disconnect the negative terminal for 15-20 mins..p1101 could be many things yes from an air blockage but filter would have to be really really dirty..have u tried cleaning the maf sensor? If thats dirty it would also trigger that code..youve looked for air leaks so thats good u didnt find any..i would try cleaning the maf sensor..i got a video on that as well
@@backyardchevy328 i put in a new MAF. Before this bc it through a code before this one. I should of known to change filter you know how you don't listen to gut instincts. Well i didn't bc money tight. Won't do again.
Through the code today & i changed the filter & 4 hrs later after driving around & multiple on /off's the light went off. :) so I'm hoping its fixed.
@@CrazieFrogz hopefully it does..good luck🙂🤞
@@backyardchevy328 i think i held my breathe to long. 😆 pulled out this morning & something. Check engine light. (P1101 intake air flow system performance)..
Cars running fine.
Well i did what you did 😆 few wks & its back. .. Any idea what next?
I removed the throttle body snd cleaned it good. Replaced the gasket and put everything back. Now it won’t recalibrate (I’ve tried EVERYTHING) and now I have a lean code p0171 . I’m so frustrated
The intake tube clicked back on properly and locked in place? If it has a vacuum leak anywhere between the maf sensor and the throttle body it could cause all that
@@backyardchevy328 yes , everything replaced and secured. I was thinking it could be the gasket I replaced but I just don’t see how I could mess that up. It only goes in one way then bolted the TB back on over it. I removed it and checked even tried putting the old one back in. No dice. Had no codes before. Thought I was doing a good thing by doing some maintenance on the TB and now here I am 🤡
@@stephanie8327 maybe its something else thats causing the code, on the same 2.0t i had to replace a pcv tube because they tend to crack very commonly causing the same p0171 and maybe thats triggering the same code
@@backyardchevy328 thank you I’m gonna go check that today ! Thanks for your quick replies 👍🏼
@@stephanie8327 good luck🙂👍
The steps to calibrate it are: turn it on for 3 minutes, turn it off for 1 minute, turn it back on for 3 minutes, turn it off for 1 minute and that's it. it is right?
Yenyenyenyenyenyenyen
Cant get the retainer off, any tips