Это видео недоступно.
Сожалеем об этом.
Stream and catchment delineation in QGIS 3
HTML-код
- Опубликовано: 14 авг 2024
- Stream and catchment delineation in QGIS 3 using only Open Data (SRTM).
This video is part of IHE Delft OpenCourseWare. More free resources can be found at www.gisopencour...
For an overview of our GIS courses and info on tailor made trainings and advise see our folder: www.un-ihe.org...
More information about the book "QGIS for Hydrological Applications - Recipes for Catchment Hydrology and Water Management" by Kurt Menke and Hans van der Kwast can be found at the website of Locate Press: www.locatepress...
IHE Delft and Nieuwland Geoinformatie offer an online course. It includes support from experienced trainers and you'll get the official QGIS certificate after completion. More info at: www.learning-gi...
Subscribe to the RUclips Channel for updates!
Credits for OpenStreetMap data: © OpenStreetMap contributors
SRTM data can be downloaded from: earthexplorer....
---------------------------------------------------------------------------------------------------------
Note that with the new dependencies in QGIS this will not work.
For work around see: • Install QGIS with SAGA...
And also see: github.com/qgi...
---------------------------------------------------------------------------------------------------------
#QGIShydro #QGIS #IHEDelft
![Chuckyy - Devil Hours [Official Music Video]](http://i.ytimg.com/vi/f3wZGj0VnZU/mqdefault.jpg)
This is one of the best tutorial videos about QGIS I have ever seen. Thank you for your effort.
I watched this tutorial during my final year at varsity in 2019 for a design project we had. 5 years later and I return to this tutorial for a big project in Africa. Hans, thanks for this brilliant and elaborate video, appreciate it dearly.
Hi Hans, everyone seems to have doubts and we are used to be in a kind of a rush, but I just wanted to let you know that we deeply appreciate the work that you have been doing. This video was exceptional; the language you used was concise, clear and it worked flawlessly for me. Thank you so much!
Thanks Bruno!
Super helpful video. Just starting out my GIS journey. This will save me heaps of time trying to manually delineate catchments and produce maps! Thank you!
Thank you so much for uploading so many useful videos, I've been trying to generate catchments for a long time and this is the first time I've managed to get it to work! Thanks again!
Nice to read that! Thanks!
Amazing tutorial, I am learning a lot from your expertise. took me a few hours to do it but finally completed all. Now I will apply this to a different catchment.
You're a teacher by "blood", really excellent content...tried the tutorial on my own maps an areas, and it is amazing how easy this can be done just following your step wise tutorial. Greetings from Norway, and a thousand thanks!
Thank you Hans very helpful for my projects in Vanuatu
I found this video very informative, I am a new graduate and this has helped me greatly in my new job
Excellent lecture and well organised covering major comands of qgis 3 with detailed explanation and demonstration simultaneously.
Why couldn't I have found this at the start of my project! Great presentation, I'm now going to go and watch the rest of your content.
Thank you for this excellent tutorial.
Literally just mind blowing
Thanks for the in-depth and detailed walkthrough.!
Really good lesson Hans. Clear and easy to follow.
Thank you very much! Before I did it with hydrology package in Arcmap. Fantastic!
Thank you for the tutorial. I have managed to generate a catchment of my own
It took me a while to grasp because I'm a beginner, but the video was very helpful.
Best tutorial on this topic, thank you very much
Thankyou so much for your detailed explanation
Dear sir, I did all the steps until the clipping, when I run the process, the next error comes out "The following layers were not correctly generated.C:\Users\4BEC~1\AppData\Local\Temp/processing_c01f9474fa7a46379b398a946e7c0e36/c38651f8b05448a9bb716228107b6a2e/S_OUTPUT.shpYou can check the 'Log Messages Panel' in QGIS main window to find more information about the execution of the algorithm.". Can you help me pls!
Thank You for your explanation, it's very useful
Fill sinks 10:30
Creating Stream Order - (Strahler order) 15:40
Very good demonstration sir please next video uploaded the Stream order calculated and show on River map in QGIS
Thanks Hans, very helpful.
The saga tool fill sinks (Wang &Liu) does not work. Any idea about the reasons?
Hi Hans,thankyou for this tutorial.
Thank you so much! It was the best video for qgis ever for me. =b
Thank you for this. Very informative.
I'm having problems with the fill sink part. The running of algorithm always fails. what should I do?
What a coincidence! I was facing the same problem. It was happening because of saga. You have to manually install saga gis and add it to qgis toolbox.
Thank you! Nice explanation.
Is it possible to delineate only right or left hand tributaries of one river separately?
Excellent explanation!
I've seen in QGIS 3.10 that the value of area of a given vetorial layer can vary a lot depending on both the Coordinate Reference System (CRS) of the layer and the CRS used to proceed with the calculations. Since I'm in Brazil, I usually work with SIRGAS 2000, UTM zone 22S.
An example of how different the values can be: I've drawn a square with a 10 km side (using SIRGAS 2000, UTM 22S). The calculated area with WGS 84 gave me 41 km² instead of 100 km². The same great difference happened when I did draw the very same square using WGS 84.
My question is: what's the rule to calculate the area in order to get a real value of the portion of land I'm working on?
When I used the "None/Planimetic" option to obtain the area (layer with SIRGAS 2000), I've got the right value. But I want to consider the surface curvature.
Thanks. First, never use a GCS (Lat/Lon coordinates) for distance and area measurements. Second, choose a projection that doesn't distort surfaces. See: ruclips.net/video/jVn1uCuhO_4/видео.html
Hii sir morphometric analysis step by process pls explain it in a video
Thanks for sharing!
This is awesome! Thanks!
Thank you so much for this tutorial.
I have one issue though . When trying to re-project the mosaic to my project CRS (GDA94 EPSG : 4283) It gives me an error. Is there a way I can get around this ?
Cheers
You are using a GCS with degrees as units. You need to project the data to a metric coordinate system.
Amazing video, thanks for share
Is it possible to delineate sub catchment? Thanks so much for your wonderful QGIS tutorials
Yes, in the same way. Or if you have multiple outlets you can do it automatically. Check the other videos on my channel.
Thanks a lot for this very informative video.
In the processing toolbox you can find a tool called Fix Layer Geometry. If you use this first, it should work. Alternatively, you can calculate a buffer of 0 of the catchment polygon, that also repairs the polygon.
@@HansvanderKwast thanks a lot.
Thank you :) Very informative
Sir I have a problem while working on channel network and drainage basins part. My layers are not generating.
Any idea how to overcome this.
There might be many reasons. First you can try changing the directory. If it doesn't work you can generate the filled DEM again and try
Thank you so much!
that's a good tutorial ,thank you
Dear Hans, thanks for the very usefull video. I have a problem with the Uplslope area function. The system creates the catchment area that I select but the max. and min. values are changing between 100 and 100. In your case it was between 0 and 100. Therefore, my vector file does not seperate the selected catchment area from the complete rest DEM file. I tried to change also the max. and min. values by setting up the min. as 0. However nothing is changing. Do you have any opinion regarding the reason of the problem? Thanks in advance.
Thank you so much. Very help me
thank you! best ever
Nice one. Thanks.
Hi Hans. Great video, again! I was wondering how you would go about doing this in a heavily urbanised catchment in order to generate "sewer catchments"? I have access to very detailed 1m resolution DSM. The idea is to use this to create our urban "sub-catchments" for use in a hydraulic modelling software. My first idea is to burn the drainage network into the DSM. Would I burn the pipes only or nodes as well (manholes/gullies) in order to create local sinks? Any ideas/ advice would be great. I appreciate you're likely a busy guy. Thanks!
*Great Tutorial 👍👍👍*
Sir, kindly tell the steps to find out the "Longest Flow Path" in that Catchment Area.
Hello Sir, at 23:24 how did you customize the bands?
This video would help you ruclips.net/video/q54xTyV7gAE/видео.html
Hi Hans, thanks for the good explenation! Please how to Delineating Multiple catchment with QGIS.
You can use the Points2Cathchment plugin from my GitHub page: github.com/jvdkwast/PyQGIS_Hydro
Hello Hans, I've found this tutorial very helpful. As a beginner for QGIS, I am having difficulty to calculate the maximum flow path and average slope of the catchment I have. I was able to generate a raster "Flow path length" map using "Flow path length" tool in SAGA, but I do not know how to convert that into a vector stream line from which I can read the maximum flow path, and its average slope. If it is worth to be your next tutorial.
Thank you verymuch
thank you
Can the drainage channels be considered as stream network?
Sir how to create basin shape file and download Landsat path/row tiles for the same sir ?
Thank you sir hope here from you soon sir
thank you for your tutorial that you put online it is really for us I will ask myself I am a student djama brice in Master 2 at the university Félix houphouet boigny of Cocody side of Ivory. I have a problem to make the pollution vulnerability map on the Qgis 3.16 software. can you help me by making a tutorial on calculating the vulnerability index under qgis 3.16.
Sir there is some problem regarding upslope area. What should I do?
There's a problem with SAGA after QGIS 3.18 or so. My advise is not to use SAGA, but alternatives like the PCRaster Tools plugin (lots of videos on this channel), GRASS or WhiteboxTools. If you still want to use SAGA, check these 2 work around videos:
ruclips.net/video/t-2ExoyhIfA/видео.html
ruclips.net/video/B1LMOOPMWgo/видео.html
Many thanks for your awesome tutorial Hans. I'm receiving the following error when I want to build a virtual raster. What's the problem? and what should I do?
Loading resulting layers
The following layers were not correctly generated./Users/parsa/Desktop/QGIS/Rur/DEM_Mosaic.vrtYou can check the 'Log Messages Panel' in QGIS main window to find more information about the execution of the algorithm.
Thanks. I can see you're saving files in your desktop folder. It's recommended to save it in a dedicated folder on your hard drive so the paths don't cause problems. Not sure, but it might be the problem here. Also check this video on good practice: ruclips.net/video/kggwFZHXCl4/видео.html
@@HansvanderKwast Dear Hans, Many thanks for your reply. I tried that but didn't work. I tried the QGIS on my Windows (the problem was with my Mac) and all worked well.
Best lecture so far. How do you proceed calculating the area of a catchment?
attribute table, geometry, area
Hello, I'm new to GIS and this is a fantastic video, thank you! I am examining the catchment of a lake in central America and I have an issue which the method you outline doesn't handle quite so well. That is, there is an area of extremely flat topography with a major river that I suspect will change the drainage characteristics of the region, bu due to the topography the calculated Channel Network Algorithm separates to sections of the river, irrespective of Strahler Order selected. Is there a workaround for situations like this? Any help or guidance would be greatly appreciated and I can provide further detail if you require! Thanks, Matt
I see that there is a video on "burning in rivers". Sorry I was unaware of this terminology. I will explore these options!
Sir, Can i get DEM from SRTM of less then 30 m pixel resolution…. ??? Actually my river channel are very small and 30 m pixel almost covers entire width of the river…
Thank you very much for this video. my network is timed out so I can not zoom into map....could you please help me with problem?
I assume you're referring to problems with access to online layers from the QuickMapServices plugin. I can't solve that if your internet connection isn't good enough. Then you have to find some offline reference maps.
Thanks for the video, as a beginner it is very helpful but i faced a problem while generating the Strahler order for the area of interest, it shows a error saying "The following layers were not correctly generated" and gives information about the location of the save file. im currently using qgis version 3.10 , please help me out with the problem
Make sure you've upgraded to 3.10.3 and you don't have spaces in file and folder names. Also check if you've used the filled dem and it doesn't have voids.
Sir what is the importance of minimum slope dialogue in fill sink by wang &liu method??
The minimum slope parameter in the Wang & Liu fill sinks algorithm is a user-defined value that determines the minimum elevation difference (and thus slope gradient) between adjacent cells in the filled digital elevation model (DEM). This parameter is important for hydrological modeling, as it affects the flow direction and watershed partition of the surface. If the minimum slope is set to zero, the algorithm will only fill the depressions until a horizontal surface is established, which may not be realistic or helpful for simulating water flow. If the minimum slope is set to a positive value, the algorithm will fill the depressions and also create a slight downward slope along the flow path, which may improve the accuracy and stability of the hydrological analysis. The optimal value of the minimum slope parameter may depend on the resolution and quality of the input DEM, as well as the specific objectives and assumptions of the modeling.
Instead of calculating the catchment area from the Fill dem raster layer, why don't you export the polygon from the Drainage Basins vector layer created before?
Excelent video, thank you very much for the explanation
Thanks. The automatically calculated drainage is not the same as the one from a specific outlet chosen by the user. Often you want the catchment belonging to a specific outlet. In the example they're almost the same, but you could also choose the outlet more upstream to delineate a subchatchment or choose a point where you measure discharge.
@@HansvanderKwast Right! I understand. Thank you.
I have several questions about this video:
1. I can't use Upslope Area because my project wasn't generating in a proper way. What should I do? Should I start from the beginning?
2. What version of QGIS 3 that you use? Is there any big difference between your version and the newer one (I use QGIS 3.16 Hannover version)?
Thanks
1. Make sure you're using your filled DEM and you're choosing the coordinate in the delineated channel (zoom in).
2. Only little differences with newer versions (such as click right to copy coordinate).
Also watch other videos on this topic. There's a playlist: ruclips.net/p/PLeuKJkIxCDj2Gk0CkcJ-QeviE41aMZd-5
Hi Hans! Great video. Im perhaps stuck at a very basic step. At 23:31 when you use the directional legend for your colour ramp for the flow direction raster, how did you do that? Where can I find that legend?
Hi Ruchi. Please checkt this video where that's explained clearer: ruclips.net/video/2Ub0c7Ss-T4/видео.html
EXCELLENT video, I ALSO PURCHASED THE BOOK, FANTASTIC!
TO VIEW THE SUBBASIN?
Dear Hans, it is a wonderful tutorial video to show drainage and water network. I am using the version of Maderia 3.10.14 currently. While watching the video, on the section of 11:00, I just encountered an error for fill sinks /wang lui showing that algorithm did not work in red colour and no raster as dem_fill appeared on the left box. Despite all my efforts, I could not manage to fix it up. Could you recommend me a way of solution to it?
Thanks. For my tuturials you should always use the LTR versions. Newer versions have new features, but can introduce also new bugs. So 3.4 or 3.10.4 are recommended now. It can still give an error (see also ruclips.net/video/2Ub0c7Ss-T4/видео.html). The these are the options: (1) run it again immediately, maybe it works the second time, (2) check if file and folder names don't contain spaces or strange characters (ruclips.net/video/kggwFZHXCl4/видео.html), (3) check if you're using a metric CRS instead of GCS, (4) maybe your area is too large for the memory. Hope this helps.
@@HansvanderKwast Thank you so much for responding both quickly and informative. I will follow all instructions and advises you just given, if it does not work again, I ll keep you posted about it. Best.
@@HansvanderKwast Dear Hans, although I followed all your advises to solve the problem yesterday, I again encountered the same problem while on processing filled terrain (The following layers were not correctly generated.C:/mos/DEM_filled.sdatYou can check the 'Log Messages Panel' in QGIS main window to find more information about the execution of the algorithm). The area that I need is Mosul and its environs. The area is not large enough to cause an overdata problem. I suppose the Mosul dam which covers a large tract of land cannot be detected probably. Could you know if the fill sinks (wang & lui) cannot map the lakes and dams ?
@@OUSTAO The dam might be the problem. The fill sinks algorithm will fill the depression in the DEM to make sure the water flows to the outlet. It results in a large gently sloping area (like the mines in my example). If the lake is covering a large part of your DEM then probably it can't solve the equations and gives an error. Normally I advise to delineate catchments with an outlet where a river enters a lake.
@@HansvanderKwast Thank you but again I had the same problem, even though I followed the steps you recommended, probably the terrrain is highly mountainous and it cannot detect the catchment area.
worked great! is there any way to make improve accuracy of rivers in lowland areas where there is little elevation difference? thanks!!
You can play with the following:
1. Use a smaller minimum slope value in the fill sinks algorithm
2. Use another algorithm than D8, try MFD or D-INF
3. Burn in the river system so the water is forced to follow more realistic water courses. Some videos on this channel about that.
@@HansvanderKwast okay great, thank you!
Thanks :) just one remark: the source of the Rur is in Belgium and not in Germany ;)
You're right. Thanks.
Hi Hans. thanks for nice and useful video. i successfully delineate a small watershed. i then tried to delineate a big watershed. it need 30 DEM tiles. till fill sinks it was okay, but my laptop got hang at the time of fill sinks. i tried several times. same result. suppose you want to delineate the whole river basin area of Amazon, how will you do that? same process or have some tips?
First your DEM needs to be "fit for purpose". If you want to delineate the entire Amazon basin, it's not useful to use a high resolution DEM. The pixel size can be even larger than 1 km. Then you need to look at high performance computing if you still don't have enough computing power.
@@HansvanderKwast Thanks a lot.
I am trying to use the strahler order on the Jhelum River, India but its not working there!
What should I do ?
Check other answers to comments here and related videos in the catchment delineation playlist on my channel.
Hi Hans, this video is really useful. Thank you for making it. How to make sub-catchment areas? You have made drainage basins for different rivers including Rur river but my question is how to create the sub-catchments inside the catchment of Rur river? I will really appreciate your help. Thank you!
Check the new tutorial on this page: ocw.un-ihe.org/course/view.php?id=11§ion=10
@@HansvanderKwast Thank you very much, Hans! I got what I was searching for.
Hi.. I see your this video.. and i see the drainage basin and catchment boundary which you derive is same , then why you create again catchment by upslope area tool, while it was also done by drainage basin? also i want to know weather drainage basin and catchment may differ or not?
They are not exactly the same. The drainage basins derived by the channel network and drainage basins tool derive all basins in the DEM based on the flow direction. The upslope area tool will delineate a specific catchment that belongs to a specific point in the river that you indicate in the tool. That can be the outlet or any point in the river. It calculates the area that contributes to water flow at that point.
@@HansvanderKwast Thanks for giving me clarity on this.
Hi sir, can we find water quantity of river at specific point using this QGIS
You probably need a hydrological model. But you can calculate flow accumulation after rainfall making simple assumptions. Check for example the PCRaster Tools plugin, GRASS or SAGA tools.
Hi Hans, thanks so much for your videos, I have used them a lot while studying limnology at BOKU. I'm having an issue at the thinning step - too many cells are removed and the line is no longer continuous, which leads r.to.vect to create many small lines. Any suggestions?
Hi! Probably something went wrong before. The question seems to be at the wrong video, because this video uses SAGA, which doesn't need r.to.vect. I assume you're using the PCRaster approach in this playlist: ruclips.net/p/PLeuKJkIxCDj05rwD3Fun7v7rpVRg7c_kE&si=kd661MjchSynsclX. Please make sure you follow all steps carefully. Check if the raster streams were still connected before thinning. Also check if your projection is correct (should not be in Geographic Coordinate System) and make sure you use the correct inputs all the time. For further questions about this approach, please post the question under the appropriate video.
This means that you can't automate this approach on Mac, unless you find a way to build PCRaster from source code and use it in your regular installation. Unfortunaltely, I'm not a Mac user, so I can't help you with this.
Thanks sir
Thanks for the great video.
Question: In attribute table, is the number '100' the catchment area (= area of the polygon?). Otherwise, how can we calculate the catchment area finally of the Rur_catchment polygon?
You can calculate the area of polygons with the field calculator. Use the $area function.
@@HansvanderKwast whats the unit of area calculated?
Hi. Just want to ask how do i calculate or where do i see the exact Area (sqm) of the delineated catchment? Thanks
Go to the attribute table. Then to the field calculator and use the function $area
What is the unit of that area? Square meter? Square miles?
@@richardlomboy684 Map units. In this case sq. meters.
Hans van der Kwast thanks
Hans van der Kwast how do i know the exact elevation of a point in channel shapefile?
Can WARP (Reproject) be done for less than 30m like 5m or 10m
Yes, but it doesn't make sense if your input is of coarser resolution. You'll not really increase the spatial resolution, but just cut the pixel in pieces with the same values.
is it possible to find the sub catchments SAGA ?
Yes, see ruclips.net/video/Hqc_1CMadhA/видео.html. But the PCRaster Tools plugin offers better options. See for example ruclips.net/video/5uGaLIlaFh8/видео.html
@@HansvanderKwast thanks!!
This is great content and an even better explanation! I just have one question regarding the fill tool. My computer can not execute this function what can possibly be the problem? Is it the RAM or maybe something else?
RAM can be the problem indeed. Check if you can use a coarser spatial resolution for your study area. < 5 m will not improve the results and for large catchments 30 or 90 m is okay too. I recommend at least 16 GB of RAM. If the size is not the problem, check if you use spaces and strange characters in file/folder names and if there are no voids in the raster. Also if the area is too flat you'll run into challenges.
Thank you for the detailed answer. I appreciate it
Thank you, Professor, it really helpful. I have a problem regarding the extraction clip raster by mask layer. I am not able to save the clipped mask into .sdat format. I have chosen Float32 as the output data type. Fyi, I am using QGIS Madeira. Do you have any idea?
Maybe you got a "geometry error"? In that case you can use "fix geometry" from the processing toolbox.
@@HansvanderKwast Thank you for your kind reply. I will do it.
Hi Ferdinan, please I'm having a similar problem. Did you get the solution? I try the procedure that the Professor suggested but it didn't fix the problem
please, build virtual raster does not figurate?
Thanks for your videos, they are great. I have a problem with small catchments though, even if I pick a point that falls onto the stream DEM, the up-slope area algorithm gives me a completelly black DEM, how could I solve that and get the area for a whatever sub-catchment?
Hi Angelo. Thanks for using my videos. Maybe you can send me some screenshots so I can check your problem?
Hi Hans,
I managed to solve the problem I think. The up-slope output is sometimes a black DEM but as you suggested, by adding "0" to "Additional no data value" in Properties/Transparency, the DEM shows the watershed delineation, I just do not understand why it happens only in some case. Any clues?
Thanks
Is it possible to delineated a catchment from a particular point on a map? I need to assess a road culvert and wonder if I can get a catchment upstream of the culvert.
the principle is the same, just follow the video and pick your point of interest at the culvert inlet
Great tutorial, thanks. I'm not understanding how to obtain the cardinal directions for the flow direction legend. The stack exchange discussion doesn't seem to explain it clearly. I get the d8 model and that the it corresponds to the direction gradient of each pixel, but how do you set it? I have 0 and 255 as values once I complete my flow direction... do you have a clear guide as to how to assign the cardinal directions?
Hi Olivia. Are you referring to this discussion: gis.stackexchange.com/questions/254939/legend-of-flow-direction-calculated-with-processing-toolbox-qgis-saga ? In my video we use SAGA tools, so 0 is North, 1 is NW, 2 is W, 3 is SW, 4 is S, 5 is SE, 6 is E and 7 is NE. 255 is for pixels without a flow direction (flat). Hope this helps.
Hello sir i have same issue too. I have values ranging from 0 to 255 in the flow direction map. How can i convert this ti have the direvtion N, NW etc?
See the answer above. Or check gis.stackexchange.com/questions/254939/legend-of-flow-direction-calculated-with-processing-toolbox-qgis-saga
How we can draw direction (N; NE; NW....) in ASPECT IN QGIS ?
You can use one of the Aspect tools from the Processing Toolbox
Hi Hans, I played the dem with your guidance but found that my river value is always the small ones. Why will this happen?
I can only think of 2 reasons:
1. You didn't use the filled DEM for calculation of the Strahler order. Then it never gets into the higher orders.
2. You're applying it to another study area where there are a lot of small rivers?
Hi Hans such an interesting and helpful video.....may I ask where I can download SAGA for free as I cloud not found it like the other plug in?
The SAGA tools should come with your QGIS installation and you can find them in the Processing Toolbox. If not, you can try to create a new profile or reïnstall QGIS. In the Windows LTR version it should be present.
@@HansvanderKwast already figure it out thank you!
Hello sir!
I am getting small polygons within my catchment. How do I get rid of them since the vector geoprocessing tool won't clip the catchment.
This happens when there are indeed topological errors in the catchment vector file. You can try one of the other clip tools from the Processing Toolbox. That usually works.
@@HansvanderKwast Thank you sir! I will work with other clip tools.
Having terrible trouble making the Upslope algorithm work at all. I'm getting nothing - what am I doing wrong?
Can you send me an e-mail with screenshots so I can have a look?
I experience an error when I get to strahler order,been doing it for quite some time now and I really don't know what to do anymore. error "Layers were not correctly generated". What could be the problem?
There can be several reasons:
1. Check if you used the filled DEM as input and not another layer
2. Make sure you save it to a folder and file name without spaces or other strange characters
3. Maybe your DEM is too large and your computer memory can't handle it. Then you should reduce the area or use a coarser DEM.
4. Maybe your area is too flat.
5. Use LTR versions of QGIS to have less bugs. The current LTR is 3.10.9
6. Check if your DEM doesn't have voids. This is explained here: ruclips.net/video/FwJSBoTn1y4/видео.html
I hope this helps.
Hi! Whats the difference between warping and just exporting it? I did it both ways and all three of them ended up different.
I thought they both use gdalwarp. What differences do you observe?
@@HansvanderKwast How do I turn on notificacions for youtube replys?
They look shifted and the range is also slightly different.
@@PhDBarinas To turn on RUclips notifications click on your picture in the upper right. Choose Settings | Notifications. For your reprojection question I'll do some tests as soon as I have time.
Hi Hans, thanks for the good explenation! However, when I try to polygonize my upslope area from raster to vector I get an error which says the layer can't be loaded properly. How can I fix this? I did all the previous steps like you explained in the video.
Did your raster show with value 100 for the catchment and 0 for the outside? If that's the case, the next thing to check is if there are spaces, minus or other symbols.
@@HansvanderKwast No it shows just like yours. Double checked on spaces, minus or other symbols. Any idea what the problem might be?
@@Niels0317 Hmm. Can you please send me screenshots of the dialogue and the log screen?
@@HansvanderKwast How do I find those? Quite new to the programm. Furthermore I actually only need the maximum distance the water can travel inside the catchment and the steepnes so I can eventually calculate the design peak flow. Could you maybe tell me how to get those as well? Nederlands antwoord mag ook, woon in Delft namelijk :)
@@Niels0317 I'm sorry. I don't do consultancy through my RUclips channel. I can only help with quick questions. You can contact IHE Delft if you need a tailor made course or assistance.
Hi Hans... How do you extract the main river flow path... and its extension?
The Strahler order method was used to delineate the river and its tributaries. ruclips.net/video/SuFl8EWDqfU/видео.html