How To Change VW Beetle, CC, Jetta, Passat, Rabbit Transmission Fluid & Filter Aisin 09G
HTML-код
- Опубликовано: 12 сен 2024
- How to Change 09G Aisin Transmission Fluid Filter on VW Beetle, CC, Jetta, Passat, Rabbit using BLAU® VW ATF Change Kit F2A1014:
• VW Beetle ATF Automatic Transmission Fluid Filter Kit - 2006-10 w/ 6 Speed Tiptronic (5 Cylinder Engine)
• VW CC ATF Automatic Transmission Fluid Filter Kit - 2009-13 w/ 6 Speed Tiptronic (09G)
• VW Jetta ATF Automatic Transmission Fluid Filter Kit - 2005-10 w/ 6 Speed Tiptronic
• VW Passat ATF Automatic Transmission Fluid Filter Kit - 2006-10 w/ 6 Speed Tiptronic (09G)
• VW Rabbit ATF Automatic Transmission Fluid Filter Kit - 2006-09 w/ 6 Speed Tiptronic
How to Change 09G Aisin Transmission Fluid Filter on VW Beetle and Audi TT using BLAU® VW Audi ATF Change Kit F2A1018:
• VW Beetle ATF Automatic Transmission Fluid Filter Kit - 2002-05 w/ 6 Speed Tiptronic (4 Cylinder Engine)
• Audi TT ATF Automatic Transmission Fluid Filter Kit - 2003-06 w/ 6 Speed Tiptronic Transmission (4 Cylinder Engine) - Type 09G
Shop Our ATF Change Kits for the 09G Transmission Here: www.blauparts....
More Info on VW Transmission Fluid: www.blauparts....
More Info on Audi Transmission Fluid: www.blauparts....
Tool J91004 and J91001 has been replaced by J91003-1: www.blauparts....
Website: www.blauparts.com
Use a temperature gun instead of the diag system. Sorry but not everyone is cruising around with a dealership diagnosis software.
Thank you very much. Your instructions were straight forward. And your supplied parts were on point, love those IV ATF bottle.
Very good video. Ty for posting it with serious detail.
I noticed that the 09G and 09M have a very similar looking gasket so watch which one you order. I just know somewhere is some guy who had to send it back because he ordered the wrong one. It is an easy thing to do.
Good video. Just did mine today and took almost exactly 3 quarts till over flow. With filter. On a 2001 Jetta 1.8 T with 4 speed..
Good video, but when I watched this it wasn't obvious to me that the engine needs to be running when you check the fluid level. That's important since you will drain off too much fluid if the engine is not running. I saw this emphasized multiple times on one of the VW forums.
Should the drain plug be out ? when the engine is running and the oil level is tested??And if the plug is out, should the plastic adapter and tube be in? to prevent splatter?
It seems there was an error in the instructions, please correct me if I am wrong. At around 5:13 you say that after filling the transmission install and torque the drain plug. After that, we allow the atf temp to reach between 35c to 45c range and we should begin to see some fluid pour out of the level insert. How will fluid pour out if the drain plug is installed and torqued to spec?
Hello Ev L!
The instructional step around 5:13 is correct. You will have the best success during your ATF change by following the steps as closely as possible. Install the drain plug as outlined around 5:13. Allow the engine to idle and wait until the transmission fluid temperature reaches between 35c and 45c. If you choose to keep the drain plug out before the ATF temperature reaches between 35c and 45c you will have allowed too much ATF to drain back out of the system. To check the level, the drain plug should only be removed when the transmission fluid temperature is between 35c and 45c. Its the window of 35c and 45c that allows for the proper fluid viscosity and proper ATF level. The ATF level should only be checked between 35c and 45c. Between 35c and 45c allow the ATF to drain until you get a small stream (just as it changes to a drip.) from the level insert drain plug area. Then as outlined at 6:13 torque the drain plug to 12 ft lb. We also have some other videos on our channel that show a diagram of the transmission fluid leveling sequence on your application.
We hope this helps! And if you have any other questions, feel free to ask!
Thanks for clarifying this process, I will be purchasing your ATF change kit very soon.
Is it safe to use temperature gun to check temperature from pan?
Hey so while I was unscrewing the pan off my car the bolts were rusted to hell so when it came out I had to cut some of the bolts to be able to get it out but now I don’t know what those replacement bolts would be and I’ve looked everywhere online and I can’t find it, please help
2008 Volkswagen rabbit automatic 6 speed
you need a thread pitch gauge. and hole size gauge. many hardware stores have these in their hardware sections if you can take you bolt into the store. Many tap and die kits will come with thread pitch gauges. always do a visual comparison of the new and old hardware as well. the thread pitches should fit perfectly and be the same width.
Do you think its okay if I use an unsuitable drain pan
What do you mean unsuitable? If it can hold around 4 liters that should be big enough.
@@JohnDoe-gm5qr lol bless your heart
If you use an unsuitable drain pan you will have to use a suitable mop as well.
@@benlilley5272 🤣🤣🤣
I bought this for my 2003 audi tt , and in this video it says to shift the gears ? How is that possible? If its a automatic all I can do is drive neutral reverse and sport mode and I can shift to triptonic mode but it wont let me go past 2nd gear on idle . What happens now?
P,R,N,D,S- not the 6 drive gears.
GREAT VIDEO!
Hi my friend. Dont speak english very well but traid to do. I writte from venezuela. And i need to know whats is real torque for every screw please....
how about 2012 Beetle 2.5l (5-speed manual transmission)? i dont see it in your list at the beginning of the video...does it apply to this 2012 as well or not? if not, do you have some recommendation how to do it? Thanks
This video is about certain automatic transmissions. You will have to search Blauparts for manual transmission vehicles. Hopefully they have something for you.
what is the recommended atf for O9g transmission. Is dexron vi(6) atf applicable ?
What if you took hoses off of the transmission cooler and put one hose in the new fluid and the other in a waste bucket and run the engine until it comes out red.
About How much Atf should drain out when you do the fluid check?
I followed this procedure when I bought my new-to-me 2008 VW Rabbit and I wasn't sure how much fluid was already in it from the last service, so I wanted to be sure to put the correct amount in. I drained 2.5 quarts. I installed 4 quarts and ran through the whole procedure while checking the temperature with an IR gun and drained the excess while leaving the correct amount in.
The next time I changed the fluid after 5K miles, I drained 2.5 quarts from my initial service. This tells me that 2.5 quarts is the correct amount of new fluid to install. I changed it one more time after 5K miles because the total capacity in the transmission is about 7 quarts (I believe) and I wanted to increase the ratio of new fluid. I skip the temperature check procedure and install 2.5 quarts of new fluid. Before I drive the car with the new fluid, I let the transmission warm up and run it through the gears with the brake on as prescribed.
Since then,I've been changing the ATF at 30K mile intervals and my transmission always works perfectly and when I start it from cold, I let the rpm's drop to 800 before I put it in gear. It never bucks or shifts hard and it has 155K miles on it. I've tried different fluids meeting the VW G 055 025 Spec and my favorite is the Amsoil full synthetic OE ATF. It costs more but since I only change it at 30K mile intervals, I consider it as cheap insurance.
Is same process to golf mk7 1.8 turbo tríptonic transmisión .?
What size is the fill adapater?
Beetle 1999 model how many liters you need .. and thank you
I'm confused. Only 3 liters came out of the pan. Why am I putting 4-6 back in?
Hi there George! The dry fill capacity specified by Volkswagen is 7.2 liters and the refill is 5.2 liters. We provide the appropriate amount of fluid depending on the vehicle application. If you have any other questions, feel free to visit the 'VW Repair & Maintenance Information' section on our website or contact us here: www.blauparts.com/policies/product.html
Blauparts LLC my vehicle also drain out 3 liters its a golf 2013 base 2.5l I did not see any leaks before the process. I have no other option to out back 3 liters I will probably drain and use the others 3 liters to be mixed amd keep that amount of fluid
+ ruben parrilla Since the fluid is going to seek it's own level, you really can't overfill it.
how long should this take?
5 to 6 Liters? VW dealership says they only require 4 Liters 🤔
My friend, do you have the pipe stick that goes inside the oil pan on the drain plug, to measure the fluid level? My car doesn't have, therefore I can't measure it properly because it drains out completely, way below the correct level.
Dealer.
Thanks !!!
we can say 5 liters ??
You said to put 5.2 litre and drain after, how much litre did come out from the 5.2 litre you put?
So 4.5 liters drained out .I changed the filter ,gasket, and put in 5 liters into my non dsg trans. I have a 2013 passat 2.5 auto. And around 3 liters came out . I did use OBDeleven for trans temp .
Is 3 liters spilling out about right?
Transmission runs and feels fine.
its 5 or 6 litres for change the transmission fluid?
Hi there! The dry fill capacity specified by Volkswagen is 7.2 liters and the refill is 5.2 liters. If you have any other how to tech questions, feel free to visit the 'VW Repair & Maintenance Information' section on our website here: www.blauparts.com/vw/vw_how_to/vw_how_to_repair_replace_tips.shtml
Blauparts LLC thank you soo much...
tr4x4 , we put 4.8 litres and.now have shifting problem. i think the appropriate is 3.5litre.
It's too late now but next time just pour out the amount you drain into 2 one gallon bottles. Use the same amount to replace it.
That's what I did for my tdi I had no shift issues. I have a 1.4 tsi now and I plan on doing the same.
Cannot hear what you are saying