You have said it very well: Not sold on the hollow motor! Right NOW i have heard about more bearing failures, water ingress or what, then i have heard in my entire 5 year Euc experience for “normal axle” motors. Beside that the hollow motor is only good for thicker motor wires, and no shims problem. Nothing else. so it is the question if its worth it..... my 2 cents.
Agreed...still have my 100v MSX from this past March and yet to upgrade. I've ridden MSP both HS/HT along with the RS. Very accurate depictions in this video, couldn't agree more that the MSX series was just "more fun"
Hollow motor bearings are no good. Quality ones are too expensive. I think they need to go back to the old style bearing like is on the Sherman. I'd love to buy an MSP HT but I dont want the RS, no way. I have a V11 and I won't ride it in any moisture because of the hollow motor. What is Gotway aka Begode's next move? Great content btw!
I personally really like the idea of them making a new smaller, lighter fun wheel. Honestly, it's why I liked the S18 over the V11, it just felt smaller and more nimble and, therefore, fun to me. (I realize it's not that much smaller, but it feels noticeably smaller for whatever reason.)
I just got the RS19 HS version and the mass is considerable. Fingers crossed, the bearings hold up. I watched a how-to on replacing them and it did not look like something I'd want to do.
@@coolhawk2003 Well, 6 months after I wrote this reply, I think the RS has grown on me. I like the power and range. But if I could buy it again, I'd probably get the HT instead of the HS. I don't need a super high top speed and would appreciate the responsiveness of the higher torque model.
@@coolhawk2003 Fine (bearings), but I don't ride through a lot of water and mine only has ~300 miles on it. It's a first batch unit, I'm pretty sure, but they have been improved, so I"ve been told, in subsequent batches.
Nice review on the RS even though I wish to see the review of the high torque version, but it's cool. 3:58 automatic pedal dipping. 4:25 RS gained more weight, lol 9:05 The bearing sounds like a car stuck in a snow. 12:36 to 12:41 You made a good point. I hope Gotway fixes the bearing issue as soon as possible. Now I think about it. I should have bought the Veteran Sherman instead of the RS HT. If the RS HT fails on me the first month even without pushing the wheel, then I'll sell it on Ebay.
I got RS HS for +/-1000km. I exploit it and enjoy it a lot (You can see it on my channel). No issues at all, no noises, malfunctions ecc. It goes like a beast in the city - You can overtake many scooters but is agile offroad too. Maybye Adam must wait a while more until appreciating RS as it was in MSX case - One year ago he was complaining a lot about MSX.
That's great to hear that yours has no malfunctions! Honestly that's my biggest complaint here. I really like the rs ;) a year ago i was ridimg for 6 or less or so, I was a noob :D but indeed i did chamge my mind a lot about msx but RS there is nothing to change if the motors will work fine :)
@@mr_wrongway I hope so too because RS is expensive ;) Interestingly I tested higher speeds - arrived at 72km/h and didn't hear a single beep (only the third alarm was turned on in EUC world). The cam was attached to EUC and didn't register beep too. I'm 90kg so I'm wondering how much more reserve it has. ruclips.net/video/-8WhWRnmpjM/видео.html&ab_channel=GlideVision (only the cam fell off the RS :)
Good one Adam Very interesting point at the end about design just getting ‘bigger’ ‘faster’ ‘more gadgets’ just like the car industry. I know a chap who’s had the same model of car for 20+ years and this year it is now so big it will not fit in his garage. Also a good point about a ‘Lite’ version with no frills, all the fat trimmed off. Less to go wrong and better for fun riding and tricks. I bet it’d sell like hot cakes.
Great video as always! This RS looks really good, but I am not going to buy one. The problem with the bearings are too important and the lower foot plates are really annoying. Going for a MSP HT cheaper and less troubles. Thanks for the video.
@@FernellyMrFerns Beyond belief. I kill all other MSP HT wheels in speed and in torque. Ive got that buttery smooth acceleration. THere is a reason Leahy rides an RS
Hey man I’m looking to get my first euc but I want something I can grow into and not upgrade once I get the hang of it and also not have a lot of problems, I mostly likely won’t ride in the rain, only 140lbs and I’ve been looking at the nikloa plus, the rs and the kingsong 16xl, out of those what do you think would be a good choice? Most of my roads are flat but I would like to do hill climbing and maybe even a little off-road, any suggestions would be great
@@truek1ng7 if it's your first one seriously consider getting a used one as it's going to get beat up and scuffed a lot when your figuring it out. I got my rs ht last week and it's a great wheel but Its heavy and not the easiest wheel to learn on
You say it all good work. Is very important buy from good selers and have free waranty this is main message what i feel in this review. I think RS can make many riders happy is just more road focused and have lover center of gravity what can make ideal euc for someone. RS HT torque must be insane gotway need powerpads for max fun. If you begode EX review end good maybee i purchase EX on next season i wait some time for real world result and overal quality first and second batches RS/EX (if veteran make HT BT LED version) I see some pictures EX without suspension ,this can be begode veteran direct competitor propably EX with RS motor speed focused(mybee si only mod like MSS just speculation).
Great review as always. Since you had issues with the bearing, can the wheel still ride? What happens if you continue riding with the rubbing likec that?
I live in Yorkshire UK, it rains a lot , we have steep hills and bad pot holes everywhere, pavements etc are a mess, I really fancy one of these electric unicycle but feel they probably would not cope with these conditions? Also of course they are illegal but so I'd my DIY ebike! Thoughts?
So about the bearing problem, I would only be riding around the city nothing off road, all pavement, do you think I’d still have issues? I was sold on the Sherman but when I saw the RS19 specs and $700 difference I’m thinking wait a second, and it’s almost 30lb lighter..
Pytanie. Czy euc się nada na ścieżkę rowerową na której leży masa mokrych liści z dodatkiem że jest to pod górę jakieś 5km? Bo się zastanawiam nad jakimiś euc albo kit do przeróbki na e bike ale nie wiem czy kółko da radę w takich warunkach ( a są mniej więcej w tym samym przedziale cenowym) .
Hi wrong way i might be off topic but i would like to buy a ruroc helmet but i am wearing glasses could you tell me if you get fog on your glasses inside when you wear it or not?
I wasnt wearing it with glasses. My GF was wearing it with glasses and it was not fogging up. Maybe a tiny bit on the edges but really good performance. It has double layered visor glass
This csc tyre is a big shit. Got it in my previous ks18xl. Very stiff. No good grip. I feeled insecure to carve at max speed. The only good for this tyre I did not need to fill up with slime. Very strong. But I prefer Chao Yang tyre soft but grippy as hell.
Great video as always! Watching this and riding the MSP currently, I think I’ll stay with what I have. Hollow motors need a bit more time it seems.
You have said it very well: Not sold on the hollow motor! Right NOW i have heard about more bearing failures, water ingress or what, then i have heard in my entire 5 year Euc experience for “normal axle” motors. Beside that the hollow motor is only good for thicker motor wires, and no shims problem. Nothing else. so it is the question if its worth it.....
my 2 cents.
Agreed...still have my 100v MSX from this past March and yet to upgrade. I've ridden MSP both HS/HT along with the RS. Very accurate depictions in this video, couldn't agree more that the MSX series was just "more fun"
Hollow motor bearings are no good. Quality ones are too expensive. I think they need to go back to the old style bearing like is on the Sherman. I'd love to buy an MSP HT but I dont want the RS, no way. I have a V11 and I won't ride it in any moisture because of the hollow motor. What is Gotway aka Begode's next move? Great content btw!
Strongly suggest to these EUC companies to hire designers
I personally really like the idea of them making a new smaller, lighter fun wheel. Honestly, it's why I liked the S18 over the V11, it just felt smaller and more nimble and, therefore, fun to me. (I realize it's not that much smaller, but it feels noticeably smaller for whatever reason.)
I just got the RS19 HS version and the mass is considerable. Fingers crossed, the bearings hold up. I watched a how-to on replacing them and it did not look like something I'd want to do.
How is it
@@coolhawk2003 Well, 6 months after I wrote this reply, I think the RS has grown on me. I like the power and range. But if I could buy it again, I'd probably get the HT instead of the HS. I don't need a super high top speed and would appreciate the responsiveness of the higher torque model.
@@arevee9429 how was the bearings? Did you water proof them or the wheel? Or you just a sunny on road kind of rider?
@@coolhawk2003 Fine (bearings), but I don't ride through a lot of water and mine only has ~300 miles on it. It's a first batch unit, I'm pretty sure, but they have been improved, so I"ve been told, in subsequent batches.
@@arevee9429 thanks for the feed back. I all most want the msp ht just to stay away from them
That might of been the final nail in the coffin for my RS HT order
I was literally sending payment today for the new RSHT but like you said, the coffin lid made a resounding thud
Gonna wait for another wheel.
@@Deuce_Allan What did you end up with in the end
@@allysally9992 i bought an RS 19 HT just last week from an outfit in NYC that had one in stock :-)
Nice review on the RS even though I wish to see the review of the high torque version, but it's cool.
3:58 automatic pedal dipping.
4:25 RS gained more weight, lol
9:05 The bearing sounds like a car stuck in a snow.
12:36 to 12:41 You made a good point. I hope Gotway fixes the bearing issue as soon as possible. Now I think about it. I should have bought the Veteran Sherman instead of the RS HT. If the RS HT fails on me the first month even without pushing the wheel, then I'll sell it on Ebay.
How it hold up after?
How are your RS Bearings treating you?
I got RS HS for +/-1000km. I exploit it and enjoy it a lot (You can see it on my channel). No issues at all, no noises, malfunctions ecc. It goes like a beast in the city - You can overtake many scooters but is agile offroad too. Maybye Adam must wait a while more until appreciating RS as it was in MSX case - One year ago he was complaining a lot about MSX.
That's great to hear that yours has no malfunctions! Honestly that's my biggest complaint here. I really like the rs ;) a year ago i was ridimg for 6 or less or so, I was a noob :D but indeed i did chamge my mind a lot about msx but RS there is nothing to change if the motors will work fine :)
@@mr_wrongway I hope so too because RS is expensive ;) Interestingly I tested higher speeds - arrived at 72km/h and didn't hear a single beep (only the third alarm was turned on in EUC world). The cam was attached to EUC and didn't register beep too. I'm 90kg so I'm wondering how much more reserve it has. ruclips.net/video/-8WhWRnmpjM/видео.html&ab_channel=GlideVision
(only the cam fell off the RS :)
Nice of you to agree with Chooch, he mentioned a "light" and price friendly version on the market ❤️
I just saw his video after publishing mine :) yup agree!
I don't think Begode make big step from the Msp to Rs... and i'm glad i bought msp hs :) not expensive like the RS and work really good!
do you still feel this way after all the reviews and 7 months later?
@@electric_meadows_racing yes ... but now I have the EX N 😜😊😊😊😊
@@davastatoeuc987 your a bum lol 😆 What not enough speed or distance?
@@davastatoeuc987 show off 😂🤣👍🏽
@@electric_meadows_racing speed ... whit RS torque can go more than 60 km/h and run whit this wheel looking dangeorus!
Those bearings are way less sturdy than old ones. They are thinner, which is a problem.
Good and honest review 👍👍👍 keep up the good work! 🔥🔥🔥
MSP still the king.
And still 1200$ more
Good one Adam
Very interesting point at the end about design just getting ‘bigger’ ‘faster’ ‘more gadgets’ just like the car industry. I know a chap who’s had the same model of car for 20+ years and this year it is now so big it will not fit in his garage.
Also a good point about a ‘Lite’ version with no frills, all the fat trimmed off. Less to go wrong and better for fun riding and tricks. I bet it’d sell like hot cakes.
Love the music. Great video production quality. Keep up the good work.
Great video as always! This RS looks really good, but I am not going to buy one. The problem with the bearings are too important and the lower foot plates are really annoying. Going for a MSP HT cheaper and less troubles. Thanks for the video.
if u find one :/
@@oxygemmusic1056 8 months ago had stock everywhere. And in Europe if you search well you still can find the model you want.
I absolutely love my HT RS 19 and haven't looked back for one sec!!!
You had any issues with it yet I'm undecided on the msp ht or the rs ht
U still like it?
@@FernellyMrFerns Beyond belief. I kill all other MSP HT wheels in speed and in torque. Ive got that buttery smooth acceleration. THere is a reason Leahy rides an RS
Hey man I’m looking to get my first euc but I want something I can grow into and not upgrade once I get the hang of it and also not have a lot of problems, I mostly likely won’t ride in the rain, only 140lbs and I’ve been looking at the nikloa plus, the rs and the kingsong 16xl, out of those what do you think would be a good choice? Most of my roads are flat but I would like to do hill climbing and maybe even a little off-road, any suggestions would be great
@@truek1ng7 if it's your first one seriously consider getting a used one as it's going to get beat up and scuffed a lot when your figuring it out. I got my rs ht last week and it's a great wheel but Its heavy and not the easiest wheel to learn on
In your opinion what’s the best EUC around 2000 dollars?
I am six foot two and 270 lbs I would like a high torque high speed EUC. What are your suggestions?
Sweet new one wheel my friend
I’m worried about the hollow motors Adam I’m getting the new monster pro and just hoping they can get it right 🙏
Fingers crossed Brian!
Fingers cross for for erides lol 😂
You say it all good work. Is very important buy from good selers and have free waranty this is main message what i feel in this review.
I think RS can make many riders happy is just more road focused and have lover center of gravity what can make ideal euc for someone.
RS HT torque must be insane gotway need powerpads for max fun.
If you begode EX review end good maybee i purchase EX on next season i wait some time for real world result and overal quality first and second batches RS/EX (if veteran make HT BT LED version) I see some pictures EX without suspension ,this can be begode veteran direct competitor propably EX with RS motor speed focused(mybee si only mod like MSS just speculation).
Thanks great video. do you plan to test the new gotway monster pro soon?
Great review as always. Since you had issues with the bearing, can the wheel still ride? What happens if you continue riding with the rubbing likec that?
It can ride but it needs to change either motor or bearrings. I dont know i dont want to find out :)
@@mr_wrongway Will you be doing a video on how to change the bearings? Hope you do
I live in Yorkshire UK, it rains a lot , we have steep hills and bad pot holes everywhere, pavements etc are a mess, I really fancy one of these electric unicycle but feel they probably would not cope with these conditions?
Also of course they are illegal but so I'd my DIY ebike!
Thoughts?
Thx Adam! Damm i wonna buy the rs ht, but now 🤔
Maybe its better to buy an MSX.
Why are the speakers exposed? Buddy of mines has one of these I believe don’t understand why some of the speakers are covered and others are not.
Hey adam where can i buy a msp ht here in US? I’ve been looking and they seem sold out. Thanks
Bearing failures happen only when riding under rain?
Hey what shin/knee pads do you have?
Great contents, and thank you for sharing your knowledge and experience. Can you put together a video on recommended protection to ride the wheel?
These are O'Neal shinguards. I think there is a gear video on the channel
@@mr_wrongway thanks mate I’ll get them
hey switchup! surprised u ride eucs as well? im watching your content too! :D
Whats your back pack?
Looks cool
You know, they make motorized transportation where you can actually sit down, right?
So about the bearing problem, I would only be riding around the city nothing off road, all pavement, do you think I’d still have issues? I was sold on the Sherman but when I saw the RS19 specs and $700 difference I’m thinking wait a second, and it’s almost 30lb lighter..
I’m on a Inmotion v10 and I’ve outgrown it already. Constantly beeps at me.
3:54 That pidgeon was like "Wtf was that?!"
also if you were buying one would you get the rs or the msp
I see EUC Bros off-roading the hell out of this thing. Can't bearings be greased properly before beating on it?
Kinda sucks i cant find an msp for sale in the states now...
Is it fairly waterproof? I will likely have to ride in the rain.
No. Better not ride in rain
Pytanie. Czy euc się nada na ścieżkę rowerową na której leży masa mokrych liści z dodatkiem że jest to pod górę jakieś 5km? Bo się zastanawiam nad jakimiś euc albo kit do przeróbki na e bike ale nie wiem czy kółko da radę w takich warunkach ( a są mniej więcej w tym samym przedziale cenowym) .
Na pewno kolko da rade :) jezdzilem ;)
Hi wrong way i might be off topic but i would like to buy a ruroc helmet but i am wearing glasses could you tell me if you get fog on your glasses inside when you wear it or not?
I wasnt wearing it with glasses. My GF was wearing it with glasses and it was not fogging up. Maybe a tiny bit on the edges but really good performance. It has double layered visor glass
can you put a link to your special pedals please
Adam- Can I ask also pls- do I unplug RS charger when the fan stops or do I wait longer?
I’d unplug :)
@@mr_wrongway dzienkuyem
Adam thank u for making this vid and all this info u give us u tha best👍
My RS19 HT came with a knobby offroad tire on it...
MSX ❤️
Cool video thanks for the info.
Just why can't they include a bloody mudguard, are they all living in a desert?
This csc tyre is a big shit. Got it in my previous ks18xl. Very stiff. No good grip. I feeled insecure to carve at max speed. The only good for this tyre I did not need to fill up with slime. Very strong.
But I prefer Chao Yang tyre soft but grippy as hell.
Does that ruroc helmet have the jaw detachable?
Not this one. It's dot rated for the whole shell
Great review Adam. 👍👍
For what speakers on a E-wheel?! ^^ after 40km/h you hear nothing 😅🤭
Zrób jakiś materiał po polsku z instrukcjami nauki jazdy i jakimś nie młodym kursantem.(najlepiej 40+)
Not happening. Moze po ang jakas nauka kiedys
1:15 well i dont need any more info
Keep listening. I rode HT for 270km
The title is misleading then.
It has a question mark though!
@@mr_wrongway Damn, he did put that question mark tho🤔
When are you planning to make video about ebike or e scooter. Last times there is only EUC
I don't know. Waiting for a couple products but it takes some time
0:40 Musik name/link please:-)
First Responder 🙄
Notification squad! :)
👍
*_*
-