I did this today and also the mass airflow sensor on my 2001 W203. I believe it was never done since 2001! Lots and lots cleaned up! It was quite dirty Next step, go for a drive. Thanks for super videos, I subscribed a few years ago 👍
THANK YOU VERY MUCH BUDDY!!!! I did both procedures and cleaned the TPS and the MAF and I this solved my engine light on after cleaning the fault codes. Thank you once again, stay safe!
@@doit_vehicles Definitely it helped! My girlfriend is happy :D it was her car. God bless you! Regards from Varna, Bulgaria and the sea!! Happy new year!
I like you man!!! I do exactly what you didi on this video on my C200 kompressor and it seems better....but we will see the time will show :):):) The car has better response on gas pedal...:) When i open it my Throttle Body was VERY DIRTY from downside.... exactly like you says...............
@@doit_vehicles Now i had a new problem on display i get a message Electonic Stability Program ESP VISIT WORKSHOP and in the same time car BRAKES by itself foe 1-2 secconds!?!?!?! Actually i dont care for ESP but why car must BRAKES by itself??? Tonight he blocks the weels for 2 seconds and the i get message Electonic Stability Program ESP VISIT WORKSHOP????!!!! Do you know for this problem??????????
Try to turn thr stearing wheel all the way right and all the way left , it usually reset the ESP . If not it might be related to wheel speed sensors , battery/ alternator issue . Try to see what trouble codes the computer gives .
@@doit_vehicles I found the problem... it is this peace of shit found in the trunk! shop.euroimpex.lt/en/dalis/213924/esp-accelerator-sensor-(esp-control-unit) I just unplug the cable a the ESP is turned off! And whn i turn on the car its immediately show the message ESP VISIT WORKSHOP and he doesent brakes wheels any more! The point is i dont want spend the money for this peace of crap..... BTW thanks for the answer :):):)
He seguido sus instrucciones y, como era de esperar, la pieza estaba mucho más sucia. La aceleración parece más fluida. El tiempo verá el consumo de combustible. Siguiente paso: cambiar el filtro de combustible Es la página más completa de este modelo. Gracias una vez más. (Lo siento por copiar y pegar en inglés ...)
I'm getting error code P0226 - do I need to clean my throttle body? Also when it rains, my fan always comes on at high speed 🤔 Thanks for all your amazing W203 videos! Really good instructions
Great video!! I did this but it didn’t solve my problem. I have a C230, when I stop at red lights it stalls. Seems like it does this when it’s hot. As long as I keep my foot on the peddle, and focus the rpm above 1000 the car runs fine. No codes. Any ideas on what to do next?
Hei ! Try to collect more data on Oxygen sensors , MAP sensor , LTFT and so on ... It sounds like a fuel delivery issue , but I can't really tell for sure without doing some tests .
My check engine light is telling me that I have a problem with the maf sensor. I replaced it and noticed oil in the intake system. Can you do a video on how to find and fix an oil leak/blockage in the breather system?
does hi shows you P0101 faulty code? And does sometimes when you drive and you want to stop when you release gas pedal and press brake the RPM goes up and down it drops almostly to 500 rpm and goes to 1000...and the again 500-1000 for a several times and then he goes to his 800rpm???
I use something like a tiny screwdriver to take off those two snaps from theyr pin . careful not to brake them . The best is to use tweezers to keep both snaps off ; also use some WD 40 if needed .
Hello ! I think the 408 227 111 001 might be a newer aftermarket part of the "002" model so it should fit . also it looks like it's a mechanical activated flap so less need of "acceptance " from the ECU . To be 100 % sure check for any differences betwen those 2 or if you are lucky you might get an official answer from a MB dealership ...
@@rokyifethi1299 Not always ; that number can be slightly different on some parts if the part is aftermarket . So I think the part will fit . Sometimes the part number can be completely different and still fit and work fine .
The best cleaner to use is one of these : www.ebay.com/itm/CRC-Throttle-Body-Air-Intake-Cleaner-Net-Wt-5-oz-Can/292446973986?epid=1640104639&hash=item441732b022:g:yiwAAOSwEWtZt~VM If not , any cleaner that doesn't contain oil or water will do the job :)
wd - 40 contains lubricants ( oils ) , if that throttle valve will get oil on , than the dust and other particles will stick on the throttle body over time . The " special " cleaner is dry and evaporates after cleaning so therfore it will stay clean for longer .. so , personally I won't use wd - 40 , brake cleaner or other stuff on a throttle body :)
URGENT : I cleaned the throttle . Put everything back together, car wont start. It s like it s stuck . No light on the dashboard . Benz w202, 1995, 1799cm3, 4 cylinders
@@doit_vehicles it s on now. I cleaned the sensor with electric spray cleaner also so it was wet . I gently wiped it with paper n blow on it . Dunno why but now it s on . Thank you
Thanks for sharing this video! I've been experiencing a noise with my 1999 C230 Kompressor engine similar to the one in this video link 👇ruclips.net/user/shortsXgjhlLkP8CA?si=i8sqa7SbH5wqMwQu Any helpful advice or ideas would be greatly appreciated. Thanks in advance!
New video on how to test the Throttle Body on this car :
ruclips.net/video/IwkklMM4O0s/видео.html
How do you check if it's working properly. I just took mine out an it is open on the throttle
I did this today and also the mass airflow sensor on my 2001 W203. I believe it was never done since 2001! Lots and lots cleaned up! It was quite dirty
Next step, go for a drive.
Thanks for super videos, I subscribed a few years ago 👍
Thanks for staying on this channel :)
THANK YOU VERY MUCH BUDDY!!!! I did both procedures and cleaned the TPS and the MAF and I this solved my engine light on after cleaning the fault codes.
Thank you once again, stay safe!
Excellent , I am glad it helped !
@@doit_vehicles Definitely it helped! My girlfriend is happy :D it was her car. God bless you! Regards from Varna, Bulgaria and the sea!! Happy new year!
@@MomchU God Bless you man , and happy new year ! I was in Varna long time ago ... )
@@doit_vehicles Thank you!!! If ever visit it again, give me a sign, you are welcome for a водка мой друг!!! 🙏
I like you man!!! I do exactly what you didi on this video on my C200 kompressor and it seems better....but we will see the time will show :):):) The car has better response on gas pedal...:)
When i open it my Throttle Body was VERY DIRTY from downside.... exactly like you says...............
that's nice to hear :)
@@doit_vehicles Now i had a new problem on display i get a message Electonic Stability Program ESP VISIT WORKSHOP and in the same time car BRAKES by itself foe 1-2 secconds!?!?!?! Actually i dont care for ESP but why car must BRAKES by itself??? Tonight he blocks the weels for 2 seconds and the i get message Electonic Stability Program ESP VISIT WORKSHOP????!!!! Do you know for this problem??????????
Try to turn thr stearing wheel all the way right and all the way left , it usually reset the ESP . If not it might be related to wheel speed sensors , battery/ alternator issue . Try to see what trouble codes the computer gives .
@@doit_vehicles I found the problem... it is this peace of shit found in the trunk!
shop.euroimpex.lt/en/dalis/213924/esp-accelerator-sensor-(esp-control-unit)
I just unplug the cable a the ESP is turned off! And whn i turn on the car its immediately show the message ESP VISIT WORKSHOP and he doesent brakes wheels any more! The point is i dont want spend the money for this peace of crap.....
BTW thanks for the answer :):):)
@@acaaca9412 Yeaahhh I got same and did same!! 😂😂😂😂
Спасибо! Твоё видео мне очень помогло!
It looks so easy
Hello my friend can I do this process without disconnect the terminal battary?
Yes
He seguido sus instrucciones y, como era de esperar, la pieza estaba mucho más sucia. La aceleración parece más fluida. El tiempo verá el consumo de combustible.
Siguiente paso: cambiar el filtro de combustible
Es la página más completa de este modelo. Gracias una vez más.
(Lo siento por copiar y pegar en inglés ...)
Isn't adaptation required after cleaning?
what toolset did you use?
What causes oil on them
Is it same location/process for diesel engine c220
I have a w202 c180 mercedes c-class, the process is the same?
Good job, very quickly!!!
Thanks!
I'm getting error code P0226 - do I need to clean my throttle body?
Also when it rains, my fan always comes on at high speed 🤔
Thanks for all your amazing W203 videos! Really good instructions
Excelente justo lo que buscaba muchas gracias
After cleaning this,we must coding or not?
No , on newer cars you "code" the new part when replaced
What about c180 w202 di i need relearn it ?
does it fix this code: throttle pedal position sensor switch a circuit malfunction,
status dtc p0120
I had the same code mine was the battery although tested fine was the culprit. Did you get yours resolved, and what was the culprit?
Great video!! I did this but it didn’t solve my problem. I have a C230, when I stop at red lights it stalls. Seems like it does this when it’s hot. As long as I keep my foot on the peddle, and focus the rpm above 1000 the car runs fine. No codes. Any ideas on what to do next?
Hei ! Try to collect more data on Oxygen sensors , MAP sensor , LTFT and so on ... It sounds like a fuel delivery issue , but I can't really tell for sure without doing some tests .
It was the fuel pump on our car, having the same issue you mention.
U give me a great help. U are great I very thankful to you SIR. MAY I ASK HELP FROM. WHICH I HAVE PROBLEM WITH MATEL VALVES COVER
It my w 203 C class
I am happy the condition with matel valve cover. Hope you can help me
w202 c180 i 'd like to clean the throttle body, my quation is, is it need to relean after i finish cleaning?
On this car is not needed a "relearn "
Hello, What is your number of your throttle body. Thanks
Thanks yoy
Hi number 1 👍, can you help me? I have Problem with secunondary air Injection fix trouble code P0410 and P2036 !! Maybe a video ?! 👋👋👋
I will include that in the future 👍 thanks
My check engine light is telling me that I have a problem with the maf sensor. I replaced it and noticed oil in the intake system. Can you do a video on how to find and fix an oil leak/blockage in the breather system?
I will try to ; thanks for suggestion
Please do
does hi shows you P0101 faulty code? And does sometimes when you drive and you want to stop when you release gas pedal and press brake the RPM goes up and down it drops almostly to 500 rpm and goes to 1000...and the again 500-1000 for a several times and then he goes to his 800rpm???
Adaptasyona gerek varmı hocam fişi cıkarıp temizledikten sonra
May i cleaning with alcohol 70 % ?
How does the electrical connector come off? Do you pinch it from the front, the rear? I can't get mine to budge.
I use something like a tiny screwdriver to take off those two snaps from theyr pin . careful not to brake them . The best is to use tweezers to keep both snaps off ; also use some WD 40 if needed .
Do you need to Rev it when you start it or can you just start it up & drive?
Is not necessary , but you might want to test it and compare the " before and after "
I have a 2002 c230k my esp light comes in and it won't drive past 20mph
Is this the problem ?
👍🏻👍🏻👍🏻👍🏻👍🏻
Please Mr must clean every 6 month ?
depends of the driving conditions and if you find oil on the intake which will cause the dust to deposit on it
Ok thank, I have clean my trotle body today but I have a problem with my flow air sensor.
what do you think is the problem with that ?
Good job friend
Thanks!
what brand you use for this ?
Crc
Hello sir i have changed my mercedes c230 W202 number the throttle body 408 227 111 002 But new throttle body 408 227 111 001 Does this fit
Hello ! I think the 408 227 111 001 might be a newer aftermarket part of the "002" model so it should fit . also it looks like it's a mechanical activated flap so less need of "acceptance " from the ECU . To be 100 % sure check for any differences betwen those 2 or if you are lucky you might get an official answer from a MB dealership ...
@@doit_vehicles You mean in your words the figure must be identical
@@rokyifethi1299 Not always ; that number can be slightly different on some parts if the part is aftermarket . So I think the part will fit . Sometimes the part number can be completely different and still fit and work fine .
@@doit_vehicles But respectable sir engine My car 2.3 W 202 and throttle body The other 2.2 w124 But everything is the same in both pieces
@@doit_vehicles IS THAT This does not affect the speed of the vehicle
can i use also wd-40 to clean it?
The best cleaner to use is one of these :
www.ebay.com/itm/CRC-Throttle-Body-Air-Intake-Cleaner-Net-Wt-5-oz-Can/292446973986?epid=1640104639&hash=item441732b022:g:yiwAAOSwEWtZt~VM
If not , any cleaner that doesn't contain oil or water will do the job :)
okay, so it works also the wd-40 lol
wd - 40 contains lubricants ( oils ) , if that throttle valve will get oil on , than the dust and other particles will stick on the throttle body over time . The " special " cleaner is dry and evaporates after cleaning so therfore it will stay clean for longer .. so , personally I won't use wd - 40 , brake cleaner or other stuff on a throttle body :)
ok, got it ...maybe i can use some isopropyl alcohol , doesn't leave any impurities..
cool :)
👍💯
Like. Men
URGENT :
I cleaned the throttle . Put everything back together, car wont start. It s like it s stuck .
No light on the dashboard .
Benz w202, 1995, 1799cm3, 4 cylinders
does it crank ?
@@doit_vehicles it s on now. I cleaned the sensor with electric spray cleaner also so it was wet . I gently wiped it with paper n blow on it . Dunno why but now it s on . Thank you
@@redeemernigoohaem9735 NIce !
@@doit_vehicles 😁
How long should I let it on for the cleaner to go out of the system ? Can I live in idle?
Thanks for sharing this video!
I've been experiencing a noise with my 1999 C230 Kompressor engine similar to the one in this video link 👇ruclips.net/user/shortsXgjhlLkP8CA?si=i8sqa7SbH5wqMwQu
Any helpful advice or ideas would be greatly appreciated.
Thanks in advance!
Isn't adaptation required after cleaning?
not for this one