Thanks for sharing your ideas. Try spraying the glass/resin round with mold release. That should help the silicone come off it easier. I’m definitely going to try this.
Thanks, Michelle. I will definitely try this. I also want to make a mold of crystals in drusy. Wish I could tolerate the heat, but I can't due to COPD. I would love your lifestyle. Many friends have moved to FL.
Ohhhh... Do you live in the Cape Coral area?? I was living there during the hurricane... but moved to Lehigh Acres back in March!! Never want to go through that again! Glad to see you're getting repairs done!
Hi Michelle, I love your videos and experiments; this time I’m wondering if you could do a druzzy edge coaster, for some people is so easy but I cant do it😖 I prefer male my own coasters and trays, because I cant spend lot of money to purchase.. so I hope you can do a demostration for that druzzy edge please??!thank you so much! Hug for you🌷✨💐🙏🥰👏👏👏👏👏
I wish I knew how to make that as a mold. I’ll do some research and if I figure it out I’ll definitely share to help save people money! Thanks for watching 😊
I don’t pay attention to which part I pour first to be honest. I do however pay close attention to my lines so I have the exact amount of each. In doing this step looking at eye level my resin cure’s perfect every time.
I'm so sorry all that bad damage happened to y'all, I love the little animals. I've been making mine from Borax crystals I grew. I was going to try it the way you made your's but I just love growing them from Borax. Next time use a clear spray sealer and they will come right off for you.
I wish I knew how she made them! I can’t find a tutorial on that anywhere. People are holding that info hostage 🤣 not everyone can afford to pay that much for molds. I do have one of hers and it’s really nice but for the $75 I only used it twice 😑
Sure! You will put this little insert into a project and when the resin cures and you pull the insert out it gives a crystal affect in the piece. Fast forward to the end of this video where I use it to show you exactly what it does. Thank you so much for watching and I’m happy to answer anything I can! 😊
A new learner with resin and silicone, I made my first mold in my silicone mold and no difficulty getting it out.
Thanks for sharing your ideas. Try spraying the glass/resin round with mold release. That should help the silicone come off it easier. I’m definitely going to try this.
That is pretty interesting Michelle.And yes your experiment is doing what you want it to do. I look forward to more tutorials
Thank you so much! ☺️
Awesome!! Thank you sooo much for this Wonderful, helpful tutorial ❤😊
You are so welcome!🤗
I’ve always wanted to learn how to create druzies! I can’t wait to try this out! Thank you! Thank you! Thank you!
Your welcome!!🤗
That cross looks wonderful!!
That is a beautiful cross
Thank you! I enjoyed your tutorial. I may give it a try. Your cross is beautiful.
Thanks! Definitely try it! Thanks for watching 😊
Thank you, Michelle! Pretty cool!
You are so smart. It worked I made a druzy with a old silicone mold n it's beautiful thank you
That’s awesome!
Thanks, Michelle. I will definitely try this. I also want to make a mold of crystals in drusy. Wish I could tolerate the heat, but I can't due to COPD. I would love your lifestyle. Many friends have moved to FL.
Well unless we have to go outside we are always in the AC. We do love it down here though!
The shell cross is fabulous!
Ohhhh... Do you live in the Cape Coral area?? I was living there during the hurricane... but moved to Lehigh Acres back in March!! Never want to go through that again! Glad to see you're getting repairs done!
We are in North Port in the eye wall for like 12 hours ☹️ had about $240,000 In damage.
What a fantastic tutorial thank you! ducks were so stinkin adorable
Thank you! I hope you try it! I love spring with all the different babies around here 🥰
Thank you!! Good job
Very interesting tutorial!
You must be a fan of Julie Cutts too.
I am! I’ve learned a lot from her as well 😁
That was awesome! I can't wait to try this myself! Thank you so much
Your welcome 🤗 thanks for watching 😊
This is a great tutorial.
Thank you so much
Your welcome 🤗
Hi Michelle, I love your videos and experiments; this time I’m wondering if you could do a druzzy edge coaster, for some people is so easy but I cant do it😖 I prefer male my own coasters and trays, because I cant spend lot of money to purchase.. so I hope you can do a demostration for that druzzy edge please??!thank you so much! Hug for you🌷✨💐🙏🥰👏👏👏👏👏
I wish I knew how to make that as a mold. I’ll do some research and if I figure it out I’ll definitely share to help save people money! Thanks for watching 😊
@@glitznglitterbymichelle1 Thank you so much for your replied😘💐👏🌷✨🙏
Thank you for the information...do you have a video on making regular incerts
No I don’t I’m sorry
Can you put a dusting of cornstarch in it as well?
I’m not sure this was my first time making them. I do know the surface you want to mild has to be shiny. Maybe a mold release would work.
Wait did you mix part B to part A before adding the broken glass?
I don’t pay attention to which part I pour first to be honest. I do however pay close attention to my lines so I have the exact amount of each. In doing this step looking at eye level my resin cure’s perfect every time.
I'm so sorry all that bad damage happened to y'all, I love the little animals. I've been making mine from Borax crystals I grew. I was going to try it the way you made your's but I just love growing them from Borax. Next time use a clear spray sealer and they will come right off for you.
I’ve never heard of the borax way! Sounds super interesting! Do you do tutorials!?
@@glitznglitterbymichelle1 Sorry I never seen this comment. No but If you wanna chat on your last video we can.
When I get my supplies, I'm going to make molds like Julie make, wish me luck.
I wish I knew how she made them! I can’t find a tutorial on that anywhere. People are holding that info hostage 🤣 not everyone can afford to pay that much for molds. I do have one of hers and it’s really nice but for the $75 I only used it twice 😑
I just ran across your video.... What is druzies and what is it used for?? Anyone??
Sure! You will put this little insert into a project and when the resin cures and you pull the insert out it gives a crystal affect in the piece. Fast forward to the end of this video where I use it to show you exactly what it does. Thank you so much for watching and I’m happy to answer anything I can! 😊
What do you use for clear coat? Thanks
My normal resin, nothing special.
How can i make my own shattered glass. Please let me know 😢
All it is is broken mirror pieces
🥰
You sounds like Vera Farmiga to me
😁
Why is there a nature video in this tutorial?
My old videos included some stuff from my front yard.
For those of us who don't know what druzy is, I had to google it. Would've been nice if you would've told us what it was before hand.
Your absolutly right! I'm sorry, I will make sure to explain better going on from here! Thanks for the input, it is well received.