Over 3 hours long, this installment was jam packed with great info. I saw it live and even though I have many years of experience working with these materials, even I learned stuff I did not know. Well worth the watch!
I have understood and the best way of mold making their is many liquid and material to do the perfect use of them I really have enjoyed your presentation in mold making. I am looking foreword to try any order of wrath I need as a hobby. I was getting confused of which is best to use .many on youutube that you can use .Now i got to know the best way Thanks .
I lived across the street from Smooth-On when you were at 1000 Valley Road in Stirling N.J.. Since there was no internet in the 70's and 80's I never knew what you manufactured. It wasn't until your PMC-724 Elastomer started being used for Motion Picture air Bladders and the stretching face in "An American Werewolf In London" that I figured it out.
I appreciated hearing about the needling pour with the very high viscosity product after vacuum degassing and the beautiful end result! Your explanations are extremely helpful here in successful product creation in the end result, so very much appreciated! Thank you! 😊🙏🏼💕
This is great, thank You! I have a question though, I m trying to copy miniature 1:24 scale car tires (they are extremely detailed, and expensive too), what material would you recommend, it needs to be like rubber, and what should I use for casting material, thak You!
You absolutely can! You can send us a tech ticket if you have any questions about mixing larger amounts? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Hi I’m from the uk, and was wondering what is the best materials to use on my dolls I need a soft silicone but don’t know how liquid shore strength to use thanks
Hello, I have some questions about painting, Its there the possibility of making a paint mix from platinum silicone cure, and for platinum cure silicone? So it can have its propertis. Or in case you want a fading effects in color, Do you recommend applying a thin fast curing platinum cure silicone on the mold, and in the middle of curing add the rest with platinum cure (being a more viscous version) with the base color? Example: Thin (Body Double Fast Set) and thick (Ecoflex 00-31 Near Clean ) Thanks in advance :)
I am working to make a silicone puppet skin using ecoflex 0020. I have a three part ultra cal mold and am working on making a core with an injection port to cast. Do you have any suggestions on making a core wit an injection port?
Hi there! This is a good question for our tech support team, can you send them a ticket here? www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!
Hi all. I need to make thin silicone strands, 1,5 mm in diameter and about 300 mm long. We make BDSM floggers and I want to make these strands for the sensual flogger. I am thinking that extruding the strands may work. Does anyone have any inputs or advice please?
Over 3 hours long, this installment was jam packed with great info. I saw it live and even though I have many years of experience working with these materials, even I learned stuff I did not know. Well worth the watch!
Glad it was helpful!
Another great live presentation. Thanks, Milo! Thanks, Smooth-On!
Glad you enjoyed it!
This was so helpful, thank you so much! Hopefully my casting will go well after watching this!
Thank you for watching! Don't forget to subscribe!
I have understood and the best way of mold making their is many liquid and material to do the perfect use of them I really have enjoyed your presentation in mold making. I am looking foreword to try any order of wrath I need as a hobby. I was getting confused of which is best to use .many on youutube that you can use .Now i got to know the best way Thanks .
Thank you for watching! Don't forget to subscribe!
I lived across the street from Smooth-On when you were at 1000 Valley Road in Stirling N.J.. Since there was no internet in the 70's and 80's I never knew what you manufactured. It wasn't until your PMC-724 Elastomer started being used for Motion Picture air Bladders and the stretching face in "An American Werewolf In London" that I figured it out.
Great memory!!
I appreciated hearing about the needling pour with the very high viscosity product after vacuum degassing and the beautiful end result! Your explanations are extremely helpful here in successful product creation in the end result, so very much appreciated! Thank you!
😊🙏🏼💕
Thank you for watching! Don't forget to subscribe!
I subscribed. Watching from upstate New York, USA
😀
Great watch wow. Lots of useful info
Thanks for watching! 😃
Thank you for a great video!
Thanks for watching, and don't forget to subscribe!
Good presentation and instruction.
Thanks for watching! 😃
This was great, thank you!
Thanks for watching! 😃
Very informative brother! Great job!
Glad you enjoyed it!
This is great, thank You! I have a question though, I m trying to copy miniature 1:24 scale car tires (they are extremely detailed, and expensive too), what material would you recommend, it needs to be like rubber, and what should I use for casting material, thak You!
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Can you mix silicone? If you have a larger project.
You absolutely can! You can send us a tech ticket if you have any questions about mixing larger amounts? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Hi I’m from the uk, and was wondering what is the best materials to use on my dolls I need a soft silicone but don’t know how liquid shore strength to use thanks
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Hello, I have some questions about painting,
Its there the possibility of making a paint mix from platinum silicone cure, and for platinum cure silicone? So it can have its propertis.
Or in case you want a fading effects in color,
Do you recommend applying a thin fast curing platinum cure silicone on the mold, and in the middle of curing add the rest with platinum cure (being a more viscous version) with the base color?
Example:
Thin (Body Double Fast Set) and thick (Ecoflex 00-31 Near Clean )
Thanks in advance :)
We would recommend using Psycho Paint, a platinum silicone paint base, for bet adhesion: www.smooth-on.com/product-line/psycho-paint/
I am working to make a silicone puppet skin using ecoflex 0020. I have a three part ultra cal mold and am working on making a core with an injection port to cast. Do you have any suggestions on making a core wit an injection port?
Thank you for watching! Don't forget to subscribe! Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Can I make a mold of an old textured wall and stamp it into a repair patch ?
Sure! Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Hi keep I up one thing that I like to learn do ing a very big octopus .
Hi there! This is a good question for our tech support team, can you send them a ticket here? www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!
Hi all. I need to make thin silicone strands, 1,5 mm in diameter and about 300 mm long. We make BDSM floggers and I want to make these strands for the sensual flogger. I am thinking that extruding the strands may work. Does anyone have any inputs or advice please?
Like tin and platinum
You should not mix tin and platinum in the same project.
Thank you!@@smoothon
Thank you for watching! Don't forget to subscribe!