The design and manufacturing process is incredible. It saves all those man hours of dangerous work. I always thought Americans are the greatest until it came to building a modern steam powered unit for vehicles. Ted Pritchard did it standing on his head.
Very good and knowledgeable information about monopole tower erection. I request you to kindly also share video about electrical equipment installation and cable erection works for the monopole towers. I also want to learn about erection duration along with required Man Powers along with required Machinery. Thank you for very importance video.
Hello - Great video. Subscribed. Can I ask, what size of anchoring threaded rods, and nuts did you use? What calculations did you use to decide on this size?
Interesting group of people in the comments 😂 I’m here because I was at a nursery and walked right up next to something like this with 2 long poles to make an A shape. Wondered how thick it was, from another plate welded looked like 1/4” thick steel. Also wondered how deep it must have been set into the ground as there were no exposed bolts. It was a few hundred feet tall.
The crane operator's ultimate skill is the key factor in installation 👌👌👌👌👌👌
The design and manufacturing process is incredible. It saves all those man hours of dangerous work. I always thought Americans are the greatest until it came to building a modern steam powered unit for vehicles. Ted Pritchard did it standing on his head.
ವಿದ್ಯುತ್ ಕ್ಷೇತ್ರದಲ್ಲಿ ಕೆಲಸ ಮಾಡುವವರಿಗೆ ಉಪಯುಕ್ತ ಮಾಹಿತಿ. ಕೃತಜ್ಞತೆಗಳು.
Very good and knowledgeable information about monopole tower erection. I request you to kindly also share video about electrical equipment installation and cable erection works for the monopole towers. I also want to learn about erection duration along with required Man Powers along with required Machinery. Thank you for very importance video.
Dunia pasti tercengang bila menonton video ini...ini benar-benar sangat luar biasa...👍🇮🇩
The monopoles that we've got only have 2 segments plus cross arms. How many segments they have really depends on how big of a crane you have.
The lifting capacity of crane determines the number of segment. However lesser the number of segment, more strength the monopole have...
Excellent and skilled, accurate methods a.wonderfull mains of employees.
Really informative
Hola, una consulta, que herramienta usa rn el min 6:37 ? El peso mismo del monopolo no asienta la union ?
we have monopole towers in Philippines
Nice work and a litel bit dangerous how ever I love design the tower structural
Thank you . I work in 500kv. Can u do videos on formulas of calculating stub top. Half diagonal slope and levels n angles. Thanks
Yes I will
Great job.
Thanks!
Engineering is my passion, I real like this exercise.
this monopole looks strong, im tower climber, my current tower so crazy shaking from light wind or when somebody move a bit, so scary.
Porque não tem pelo menos duas guias nesta base?
Hello - Great video. Subscribed. Can I ask, what size of anchoring threaded rods, and nuts did you use? What calculations did you use to decide on this size?
Superb
It would suck so badly to get the base section off by a couple bolts!
They have templates
One big problem with jobs like this is that more than one person wants to Guide mccane operator
Yep I hate that and even more so when I can clearly see what needs to happen
@@IamVince1aa So then why bother looking at everyone trying to guide you then?
to bad they skipped the part where they set the base upright.
NICE SIR!
This is nice!!
Thanks for your support. Please subscribe to my channel for more videos
Where this Monopole is used. Is it for transmission lines?
Where the place is not available for simple template or tower there it is use
Incredible
Cómo ponen las anclas estás torres
this has tremendous forces, note the double bolt base design, incredible, must be doing dead end forces or change of direction duty ?
Sorry, but a spirit level across the buttress plates is considered plumb? wow... there's got to be more than that.
Ate the splices welded or just left like a lap joint
Arc Fusion welding is done at the splices
Allowable deflection?
How long did this take in real time?
I think assembling could take one day. Building the concrete base could be two days plus 28days for curing the concrete
What material is this made out of?
Galvanized steel
Papier mache
kryptonite.
Metal.
Tickey-Tackey
What is a Gusset plate? please elaborate it
Triangle piece of steel. Strongest design is a triangle. Usually they are fully welded to provide extra strength
stiffeners @baeseplates
MONOPOLE ERECTION!
My bad, it's not what I though it was about 🤣🤣
HOW TO DESIGN A TOWER BY WHICH SOFTWARE IN COMPUTER
[STAAD.Pro - Bentley] - shell element ----> advance foundation software
ASM tower
Interesting group of people in the comments 😂 I’m here because I was at a nursery and walked right up next to something like this with 2 long poles to make an A shape. Wondered how thick it was, from another plate welded looked like 1/4” thick steel. Also wondered how deep it must have been set into the ground as there were no exposed bolts. It was a few hundred feet tall.
Imagine if those bolts didn't allign 🤣
thats why engineers exists
Template was used;
@ 3:57 , so satisfying 🙂
😏
👍😮
Hillo sir
Baby TeSla kingDom 😍 love 😍🙏
មនុស្ស ខួរក្បាល ឆ្លាតៗ😍 ឆាប់ចូលមក បង្រៀន ប្រជាជនកម្ពុជា អោយចេះធ្វើ បង្កូល ដែក នឹងភ្លាម 😍🙏😍👉💚