Model A door rust repair Part 1. Working on the inner door sheetmetal patch panel!
HTML-код
- Опубликовано: 15 дек 2023
- Door repair begins on the HEMI powered Special Coupe Hot Rod build!. In this video, I get the inner patch panel to fit, so we start on the outer patch in the next video. I'm making progress!
Welcome to my Channel! I had another great week in the shop beating and banging on my Hemi powered Model A Special Coupe Traditional Hot Rod build.
There's still plenty to do! Subscribe and click the notification bell so you don't miss a thing! Please leave a comment, and thanks for watching!!
Coming up soon on this project... More trunk repair, chassis fabrication, finishing the rear subrails, fitting oversize door pins, rebuilding door latches, more rust repair on the doors and quarter panels, and much more!
Thanks for watching me bring this old 1928 Ford Model A Special Coupe back to life!
Need my address? E-mail me, and I will send it to you so, that I don't have to make it public, Thanks!
E-mail: phillipshotrodgarage@gmail.com
Visit me on Facebook: / phillips-hot-rod-garag...
#patchpanel #traditionalhotrod #builtnotbought #modela #coupe #hemipowered #rusty #fabrication #cutting #grinding #metal #ford #old #hotrod #stud #welder #rust 
Авто/Мото
Good to see some progress with the model a! Keep them coming!
Oh yea, felt good to get it moving in the right direction again. Thanks for watching as always!
Progress during the holidays is earned for sure. Busy times.
That’s right.
If the outer skin piece goes as smooth as that inner piece, looks like it will be a cinch! Nice work Phillip! Cool gift from Brian too, gotta love that! Have a great weekend Phillip!
Thanks, I appreciate the comments. I feel like the outer piece will go fairly well, but we will see. And yes, it was real nice of Brian to send that. I definitely appreciate it.
Looking great Phillip, merry Christmas to you and your family
-Spanky
Thank you sir. Merry Christmas to all of you up there in Tennessee!
Congratulations Phillip I noticed you reached 2000 subscribers!!
I did! Thanks! It's strange though, views are down on my latest video, but subscriber counts are rising. The videos I did on the 57 Chevy seem to be where the channel growth is coming from. In almost two weeks, only 368 subscribers watched my last video. I'm not complaining, I'm thankful! I'm just going to keep plugging away at making videos as I can, and see what happens. Folks probably want me to stop talking, and get back to work HAHA!
@@phillipshotrodgarage that's right kee moving forward !
Great work😊
Thank you!
Just would like to say ----- Merry Christmas to you and yours and the Best for the Holidays ------- Hope you two are enjoying this time of year --- soon it will be a New Year and we're off and running again ------- Thank You for the video's you bring us and again ---- Merry Christmas ------- Rodney
Thank you, and Merry Christmas to you Rodney! I always appreciate your comments! New videos are coming soon!
You're welcome !
Glad to have it. I'm sure something in there will help with the engine build! Thanks a million!
@@phillipshotrodgarage I honestly don't see how they can ask upwards of $300 for that book even though it's out of print, $50 at best
I agree. People go crazy over things sometimes.
Its about time!!! 😂😂😂
I know it man, I've been MIA.
@@phillipshotrodgarage i have been too, got a new laptop, made a new intro, i took a cpl weeks off. It was startin to feel like i was just makin content to make content and that just adds up to bad content! Im back in and fired up again!
Merry Christmas 👍👍
Merry Christmas to you!
Howdie awesome gift way to go there's still few people who still can help out glad l watched today learned a little till next time ya got this mighty fine Sir thanks for sharing from Canada 🇨🇦 SK!!! Merry Christmas and happy new year made another one 🎉🎉😊
Thanks 👍I'll try to see you all again before Christmas, and I hope have a great one!
Thank you for working on the door it reminded me I needed to order new door bottoms. Do You have any suggestions on where to get them . Thanks again for making the videos I always appreciate them 😊
I purchased my panels from Howell's sheet metal, but I cant say if they are the best or not. I have ordered other parts for my Model A from Mike's Afordable, Snyder's, Bert's, and Smith and Jones, and I've been pleased with my experience with all those vendors. I wish I could make a recommendation, but I have never compared these panels from a vendor other than Howell's. Thanks for watching!
Hi Phillip. Nice progress on the model A door. Are you going to MIG weld the outer skin on? Just wondering. I've been MIG welding the sheet metal repairs I've been doing on my project truck but am curious if there would be less grinding and cleanup work if I were to TIG weld it instead. Thanks!
-mike
I think there are some advantages to TIG welding. The most obvious advantage is the weld is softer than a MIG weld and is a lot easier to hammer out when done. A MIG weld is harder to get perfectly flat and blended in with the panel because the weld is hard. Hammer too much and the panel will crack beside the weld. With that being said, I’ll likely MIG weld all this because I’m not really that good with a TIG. I’ve not practiced much lately and this is a big area. I feel like I can control the heat better using the method I’m most comfortable with. I won’t need to completely hide the seam, because there will be body filler on the panel anyway. So MIG it is for me, most likely.
Thank you!@@phillipshotrodgarage