Just read about how little water there is in Pakistan. You all have my hopes and prayers that you get record rain falls soon. I was wondering why nothing is green everything dusty , well i know now. Bless you all and i hope something changes for the better.
I wish I could send them a couple of auto darkening welding helmits I have. I worry that if I did send them, I would end up on a watch list by mistake. These guys have serious talent when it comes to fabrication. It takes talent to cut a perfect circle like the first guy did. It takes a lot of skill to make all those parts and fabricate them into a working machine. They do this work in a primitive shop with only the bare minimum of tools. They deserve to be well paid and cared for.
@firetablet1995 I have lived in SE Asia and some similar third world countries. The problem is that they don't have access to proper safety gear. Even if they could get it, because they don't have the money for it. In Western countries, companies have to force employees to wear the correct clothing and safety gear. There are many who think they don't need it. I've seen some serious accidents that shouldn't have happened. A welder had a plastic Bic lighter in his front shirt pocket. It exploded when he was using a cutting torch, and molten metal melted through his shirt and the plastic of the lighter. He thought he didn't have to follow the rules. I feel sad to see some of these guys with their shirts full of burn holes. They are trying to earn enough to feed their family. Then, a preventable accident happens, and they have no way to care for their family.
@@Jonathan.D But if they wolud clean up so they dont have hurdles to climb over and dont toss everything on the floor the saftey would improve a great amount.
Excellent... thank you for sharing..from Australia kind regards..as a boilermaker i can say i love this get it done type fabrication💯🎯i also love the team work. Hope it stays the way it is forever!!!occupation health saftey have wrecked industry in Australia..along with the unions...
You know what's hilarious. Despite all the health safety bs and quality control, everything in Australia is mediocre or poorly made at worst and very expensive. Just look at the houses they are building nowadays
It never stops amazing me what men can do when they put their minds together and are not afraid of a bit of hard work. Why in the world do we let politicians and religious leaders get us fighting in wars. Working together what a wonderful world it could be. Would love to see a 3d model on the working of that machine.
15:43 "I've created a perfectly-machined rolling surface on this axle. What shall I do with it? I know, I'll carelessly toss it on a brick surface, creating pits and blemishes that will reduce its working life by tenfold!"
Simply amazing! This is called "Engineering". Really no workds can appreciate the talent, devotion, and ingenius efforts, and experience put together to deliver function. I love this video.
@ 1:21:25 - Suspension? We don't need no stinkin' suspension! LOL! @ 1:51:00 - You can be cool, but not smoking a cigarette, no safety glasses or respirator while spraying flammable paint cool! @ 1:54:00 - Hey genius - Do you think a cheap pair of Harbor Freight gloves may have prevented that finger injury? I have to wonder how many injuries occurred during the making of this machine? How many severe ones?
That's a complex build with the tools they have they do a great job very hard work did not see any grease nipples on the moving parts Regards Steve UK London
You got to hand it to those guys, they don’t waste anything! Most all of the material looks like it was salvaged. Over here in the USA everything would have been new material and the cost would quadruple. I have always been know as a scrounger/Hoarder and have made some really useful and even elegant devices/machines using mostly salvaged materials. Using that kind of material requires lots of “Fluidity “ in the design. Hahahahaha! Good job guys!!!!
Будь моя воля отправил бы с наших К.Б.инжинеров и экономистов на профпрактику и глядишь через год,другой наша лада Гранта имела бы другие отзовы и характеристики😁👍
Anyone else wondering if some of the material and bearings used in this video came from the military equipment Biden left in Afghanistan? Seriously.. can anyone ID that axle they're using @ 1:20:35? Looks pretty heavy duty; perhaps out of a Humvee or similar? I could also be completely wrong.
Wonderful Machine prepared by great hard work and Skill, although it has complex technology and manufacturing but is very much useful for Bricks Making Industry, it will definitely reduce the Labour Cost and increase Quantity of Production, so Bricks Price May Reduce, The Manufacturer Should Pay Attention on Machines, Like Lathes, Drill Machines and Grinders etc, Use Raw Material (New One) and PPEs for Workers, they (Workers) should also be well trained in like, Fitting Parts, Bearings not to be Hammerd and produce Welding Joints as per Standard Practices so that their Skill may become Solid and Proven one. Thanks a Lot for the Video and Effort carried out in preparation of Video.
Dans ces reportages, c'est toujours un plaisir de voir des travailleurs aussi adroits. Leurs gestes sont précis, sûrs et aucun n'est inutile. Merci et bravo à tous..
Amazing ethic and craftsmanship. If ever these Indians get going in the same direction, they'll be more formidable than their European Aryan brethren were in the 19th and 20th centuries. The Chicoms better think twice before getting too cocky with these folk.
Они сами Аллах! Все религии основаны на догмах! Догма это истина заКЛЮЧенная в рамки непосредственного учения,т.е у мусульман своя истина у христиан своя,и так далее,т.е не есть Истина.
The Great people from India. Which school do this guys study all this. Kenya government should Link as with such programs to elevate our juakali artisan who are struggling alone. We cry for unemployment with a population of 40 million. we actually lack innovation, we better imitate countries like Indian ,Iran, and parkistan the engineering standard are what African needs.
as Pakistani there are no such schools in Pakistan these people are artists they learn it from some skill person and pass it to next generation and these are private workshops, govt has no role in this industry. but still you can visit Pakistan get apprenticeship with them and promote it in your country, you should visit industrial city Guranwala Pakistan.
this man has amazing talent, not everyone has it, they deserve a high salary, like in other countries, Pakistani people are really talented and have artistic hands👍
Brilliant, Skilled heavy manual labour. Who'd have thought you could have all three in one job. I love it. Be nice to have overhead cranes or magnet hoists but hey, these guys get it done.
Желаю тебе жить в высотном доме где такие профессиональные и квалифицированные специалисты его построят! 😘 И мост к дому как и авто ! 😂 И будет тебе счастье. Но не долго ! 😂😂😂
What a superb demonstration of what can be accomplished with a couple of metal L-squares, a couple of oxy torches and a lot of sweat from a group of men wearing flip-flops and without anything besides occasional makeshift eye protection. The finished product is impressive and a special kudos to the man painting the signage on the machine freehand. A-1 job!
Yes , very basic tools, available everywhere, technology doesn’t exist, low skilled professionals, but the total values generated, is extremely, far high , beyond estimation. Thanks
If these masters were given the salaries and opportunities in Europe, they could make the most expensive products produced in the world for 1/10 of the price. I congratulate these people.
Handwerklich nichts dran auszusetzen, an der Arbeit, zudem scheint dieser Betrieb auch für Nachwuchs zu sorgen und Auszubilden.👍 Vom Arbeitsschutz mal abgesehen!🤨
Building a brick machine is much better idea than building a battle tank. Nice Job !!!
Love this channel. Never ceases to amaze me what people can do with rather simple tools but a lot of skill and knowledge.
❤️
Thanks for watching ❤️
After searching on Google, I found out that even the canadien Massey Ferguson tractor is made in Pakistan.
Just read about how little water there is in Pakistan. You all have my hopes and prayers that you get record rain falls soon. I was wondering why nothing is green everything dusty , well i know now. Bless you all and i hope something changes for the better.
خلاقیت و مهندسی عالی،👍👍👏👏
I wish I could send them a couple of auto darkening welding helmits I have. I worry that if I did send them, I would end up on a watch list by mistake.
These guys have serious talent when it comes to fabrication. It takes talent to cut a perfect circle like the first guy did. It takes a lot of skill to make all those parts and fabricate them into a working machine. They do this work in a primitive shop with only the bare minimum of tools. They deserve to be well paid and cared for.
And they do it in sandals
no gloves, helmets
@firetablet1995 I have lived in SE Asia and some similar third world countries. The problem is that they don't have access to proper safety gear. Even if they could get it, because they don't have the money for it. In Western countries, companies have to force employees to wear the correct clothing and safety gear. There are many who think they don't need it. I've seen some serious accidents that shouldn't have happened. A welder had a plastic Bic lighter in his front shirt pocket. It exploded when he was using a cutting torch, and molten metal melted through his shirt and the plastic of the lighter. He thought he didn't have to follow the rules. I feel sad to see some of these guys with their shirts full of burn holes. They are trying to earn enough to feed their family. Then, a preventable accident happens, and they have no way to care for their family.
@@Jonathan.D But if they wolud clean up so they dont have hurdles to climb over and dont toss everything on the floor the saftey would improve a great amount.
they would not wear them anyway.
They probably wouldn't use them any more than a pipe fitter would... that little hand held is the preferred PPE..
Those craftsmen, out of nothing , make essential machinery, that are essential to our living. This is a chain reaction that has no end . Thanks
Impresionante!!! I want to go to Pakistan to meet all those skillfull men!
Welcome ❤️ ❤️ ❤️
Yo también quiero conocer esa gente trabajadora
Great work!! This Channel justifies its Name, He is Really Discovering Skills time & time again..
This very ingenious. Recycling metal, creating many jobs, securing food on our tables, and shelters over our heads. Thanks
Excellent... thank you for sharing..from Australia kind regards..as a boilermaker i can say i love this get it done type fabrication💯🎯i also love the team work. Hope it stays the way it is forever!!!occupation health saftey have wrecked industry in Australia..along with the unions...
You know what's hilarious. Despite all the health safety bs and quality control, everything in Australia is mediocre or poorly made at worst and very expensive. Just look at the houses they are building nowadays
It never stops amazing me what men can do when they put their minds together and are not afraid of a bit of hard work. Why in the world do we let politicians and religious leaders get us fighting in wars. Working together what a wonderful world it could be.
Would love to see a 3d model on the working of that machine.
1:50:56 Smoking while painting as if the paint fumes/over spray wasn’t bad enough.😊
Interesting video maza a gea malik g
Bahut hi badiya kaam aur detail videos banaiye hamey aap key videos sey bahut kuch sikhney ko mill raha hai(from India)
❤️
great video ! ❤
صبحان الله علم الانسان مالم يعلم الهم ارزقهم من حيث لا يحتسبون
Traduzido do árabe para português: Glória a Deus, Ele ensinou ao homem o que ele não sabia e providenciou para eles de onde eles não esperavam.
Everyone works very hard , maybe that is why no one is overweight . Good result team .
The engineer that developed that is a genius
Elmo Musk should sent one of these things to Mars... Than he can build his castle out of bricks....
He is illiterate…. But he is true genius
LoL
15:43
"I've created a perfectly-machined rolling surface on this axle. What shall I do with it? I know, I'll carelessly toss it on a brick surface, creating pits and blemishes that will reduce its working life by tenfold!"
Thank you! I really like the long format video with so much detail!
Keep supporting us
you don't have sophisticated machines like the Europeans, but you do an excellent, admirable job! I admire you. God bless you ! (from old Algerian)
That's why Barabar, the Khalatika's caves👏👏👏👏👏😲👌
Simply amazing! This is called "Engineering". Really no workds can appreciate the talent, devotion, and ingenius efforts, and experience put together to deliver function. I love this video.
Thanks 🙏
Amazing! They know exactly what ro do and what to build without any sketch or drawing. Each worker knows exactly what to do in a team work. Awesome!
It’s their job. Do you know what to do when you go to work ? I hope so.
تحية من القلب هنيئ لكم اللهم انصرنا بالعلم على من اراد بنا شر
بارك الله بكم
سوريا دمشق
@ 1:21:25 - Suspension? We don't need no stinkin' suspension! LOL!
@ 1:51:00 - You can be cool, but not smoking a cigarette, no safety glasses or respirator while spraying flammable paint cool!
@ 1:54:00 - Hey genius - Do you think a cheap pair of Harbor Freight gloves may have prevented that finger injury? I have to wonder how many injuries occurred during the making of this machine? How many severe ones?
Bravo, great engineering and manufacturing.
These guys are amazing. Very talented and hard working.
Master piece of Engineering ,
❤️
LOL
a fn primitive brick machine? Seriously?
good Job. Terbaik 👍👍👍👍👍👍
They can make something from nothing bits and pieces into something!!!! They are amazing!!!🤗
Amazed at how well the machine works!
Fantastic skills and so talented workers.
Thanks 🙏
That's a complex build with the tools they have they do a great job very hard work did not see any grease nipples on the moving parts
Regards
Steve UK London
You got to hand it to those guys, they don’t waste anything! Most all of the material looks like it was salvaged. Over here in the USA everything would have been new material and the cost would quadruple. I have always been know as a scrounger/Hoarder and have made some really useful and even elegant devices/machines using mostly salvaged materials. Using that kind of material requires lots of “Fluidity “ in the design. Hahahahaha! Good job guys!!!!
Thanks for watching ❤️
Most of the metal comes from old ships the come to be scrapped all the different companies go to the coast and buy whatever types of metal they use
The man doing the torch cutting is amazingly good.
It's amazing what some craftsman can do with so little. Keep it up, guys.
Amazing ingenuity Pakistan 🇵🇰 👏 😮
❤️
Будь моя воля отправил бы с наших К.Б.инжинеров и экономистов на профпрактику и глядишь через год,другой наша лада Гранта имела бы другие отзовы и характеристики😁👍
Precision engineering
Them- "whats that dear?" 😂😂
1:32:35~ Scary! One slip and his hand is gone!
I am so impressed at the caliber of work you do considering the tools and conditions you work with and in. Great job!!!...👍..
A very simple way of making and achieving quite a large output.
Good job watched from USA
Anyone else wondering if some of the material and bearings used in this video came from the military equipment Biden left in Afghanistan? Seriously.. can anyone ID that axle they're using @ 1:20:35? Looks pretty heavy duty; perhaps out of a Humvee or similar?
I could also be completely wrong.
Wonderful Machine prepared by great hard work and Skill, although it has complex technology and manufacturing but is very much useful for Bricks Making Industry, it will definitely reduce the Labour Cost and increase Quantity of Production, so Bricks Price May Reduce, The Manufacturer Should Pay Attention on Machines, Like Lathes, Drill Machines and Grinders etc, Use Raw Material (New One) and PPEs for Workers, they (Workers) should also be well trained in like, Fitting Parts, Bearings not to be Hammerd and produce Welding Joints as per Standard Practices so that their Skill may become Solid and Proven one. Thanks a Lot for the Video and Effort carried out in preparation of Video.
Yes sir you are right
Amazing skills and craftsmanship. Please give the young eye protection 1:10:22.
Excelente trabalho , parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 🇧🇷
Excellent Creation
Dans ces reportages, c'est toujours un plaisir de voir des travailleurs aussi adroits. Leurs gestes sont précis, sûrs et aucun n'est inutile. Merci et bravo à tous..
Wow. Beautiful song birds to listen to while working. RUclips won't hit you with a song copywrite violation. Lol.
عمل رائع بإمكانيات بسيطة لكم التوفيق من الله
Amazing.
Semi automaton.
Wish you all well.
Thank's.
It is very primitive in the process of making these devices. I am always amazed that it can be done their way!
Real nice work guys !!
Gret job❤
Very good.👏👏👏👏
Amazing ethic and craftsmanship. If ever these Indians get going in the same direction, they'll be more formidable than their European Aryan brethren were in the 19th and 20th centuries. The Chicoms better think twice before getting too cocky with these folk.
It’s Pakistan
Masahallah zabrdisat will don very nice good job made in Pakistan 🇵🇰🇵🇰 zandaibad ❤ love from Iraq 💕🇮🇶🇮🇶🇵🇰🇵🇰💕🏏💐👍🌹💐 ya Allah ya Ali madad 🌹💐👍
Они сами Аллах! Все религии основаны на догмах! Догма это истина заКЛЮЧенная в рамки непосредственного учения,т.е у мусульман своя истина у христиан своя,и так далее,т.е не есть Истина.
The Great people from India. Which school do this guys study all this. Kenya government should Link as with such programs to elevate our juakali artisan who are struggling alone. We cry for unemployment with a population of 40 million. we actually lack innovation, we better imitate countries like Indian ,Iran, and parkistan the engineering standard are what African needs.
as Pakistani there are no such schools in Pakistan these people are artists they learn it from some skill person and pass it to next generation and these are private workshops, govt has no role in this industry. but still you can visit Pakistan get apprenticeship with them and promote it in your country, you should visit industrial city Guranwala Pakistan.
4:42 that uh oh sounded so funny. Haha
Blessings to u from Eric in USA. VERY good work.
Affordable EVs Are the future
Great skill all the gays well done
❤❤❤❤❤
The best is the guy doing the letters, he didn’t make any single mistake, great skill! 🎨
Х
Excellent
this man has amazing talent, not everyone has it, they deserve a high salary, like in other countries, Pakistani people are really talented and have artistic hands👍
When you have too much, you think less. They don't have too many tools but have the brain to think and make use of what they have . Good job.
Could you imagine what these guys could do with a common job shop here in America?
tell that to maga clowns who cry about "illegal aliens"
Bravo👏👏👏👏👏👏👏👏👏👏👏
Admiro a esa gente con poca cosa hacen milagros 🇺🇾👍
Hey boss I need a new welding mask.... why.... mines all covered on the inside with welding splatter.....😂🤣😎🇦🇺👌
Brilliant, Skilled heavy manual labour. Who'd have thought you could have all three in one job. I love it. Be nice to have overhead cranes or magnet hoists but hey, these guys get it done.
Thanks for watching
@@DiscoveringSkillsa
تبارد الله المعين.
Желаю тебе жить в высотном доме где такие профессиональные и квалифицированные специалисты его построят! 😘 И мост к дому как и авто ! 😂 И будет тебе счастье. Но не долго ! 😂😂😂
@@kent9105 nyet panyemenyo?
Great video! Finally we can see a machine at work. They must be really proud
Thanks for watching
Hand made well done 👍
❤️
Mabtap...sebuah inovasi yang luar biasa........assala mu.alaikum...
Salam...dari indonesia...
"قولوا باسم الله" 😊
ما شاء الله!
What a superb demonstration of what can be accomplished with a couple of metal L-squares, a couple of oxy torches and a lot of sweat from a group of men wearing flip-flops and without anything besides occasional makeshift eye protection. The finished product is impressive and a special kudos to the man painting the signage on the machine freehand. A-1 job!
==> English
ماشاء الله تبارك الله على الإختراع المتميز
Seguridad laboral, chanclas sin guantes 🧤 maquinaria a lo chapucero madre mía 🤷🤦🤦🤦
Well done Brothers, love you and your work , love from Vietnam .
Thanks buddy
Super travail bravo et merci pour toute ces vidéos.
Very basic tools, scrap metal , low technology, low cost , medium skilled labour , but the finished value is extremely very high. Thanks
Amazing!!!! ❤
Good and fast work er they moved quick
Team work.
SOMEBODY BYE THESE GUYS SOME BOOTS
wah..jite raho
Yes , very basic tools, available everywhere, technology doesn’t exist, low skilled professionals, but the total values generated, is extremely, far high , beyond estimation. Thanks
5:08 he’s not even welding but loves the Christmas tree lights he sees at night.
Working men getting the job done.👍👍
New subscriber.
Спасибо❤❤❤❤
Well done guys, looking forward to the next machine build.سلام من المغرب 🇲🇦
If these masters were given the salaries and opportunities in Europe, they could make the most expensive products produced in the world for 1/10 of the price. I congratulate these people.
Lol
They will with Palestine flags and screaming Allahu Akbar in Europa cities.
Yes , this is low technology, but the most important thing, is that the finished product performances as expected, if not better . Thanks
ما شاءالله تبارك الرحمن علم الإنسان ما لم يعلم
👍👏👏👏👏👏👏👏 excelente trabajo felicitaciones 👍👏👏👏👍👍👏👏
Legends 🎉at work!!!! 😅
Thanks for watching
Handwerklich nichts dran auszusetzen, an der Arbeit, zudem scheint dieser Betrieb auch für Nachwuchs zu sorgen und Auszubilden.👍
Vom Arbeitsschutz mal abgesehen!🤨