Testing Climbing Figure 8s with Hard Is Easy
HTML-код
- Опубликовано: 1 дек 2024
- Ben from "HARD IS EASY" collaborated with us after many of you requested it about his figure 8 video found at • Why Figure 8 knot is N... .
Learn how to tie figure of 8s like a ninja on @Hard Is Easy latest video • How to tie into the ha...
We pull tested both ways to tie a figure 8 and spoiler alert... it really doesn't make a difference. But it sure is fun to watch shit break! Let us know if you want us to collaborate on future projects and what you want to see.
👉 Learn and SHOP at www.hownot2.co...
👉 Best EMAILS on Earth: www.hownot2.co...
👉 SUPPORT US and get gear discounts hownot2.com/su...
👉 10% off ROCKY TALKIE by clicking www.hownot2.co...
Check out our new store! hownot2.store/
Definitely want more HowNot2 and Hard is Easy collabs! You guys both do such a good job. Love the joint projects.
A collab I didn’t know I wanted. Sick to see.
Hahaaa you used this beginning :DDD It was a joke.... :DDDD P.s. Thanks for testing this! P.s.s. I have a long list of things to break :DDD
You may use pulleys not carabiners
My 2 fav channels collaborating?! I WANT MOAR!!!!
Yes please. Collaborate again. This was great.
Nice collaboration! Stumbled upon Bens video the other day and enjoyed it a lot, thanks for taking it one step further :D
The collab I was waiting to seeeeee, thanks for the video Ryan.
"Tie too short of a tail, YA DIE!" That's what I come here to avoid, thanks as always for the awesome content.
i didn't even notice that at first, the tails don't move an inch
LOLOL- "Why don't they call the overhand a figure 7!" Great humor, great testing with very interesting results. Thanks to both Ben and Ryan!
It would be interesting to see how a Yosemite finish stacks up against a normal figure 8... Great work!
My guess would be that it increases the sttrength by .2kn
So, very little. I think a yosemite finish doesnt add anything to the bend radius, but it might delay the catastrophic pinching that occurs.
I’m pretty curious about this considering I always tie a yosemite finish on my eight
In ruclips.net/video/QAr-uHd8h8o/видео.html it shows Yosemite finish is harder to untie. In vimeo.com/40767916#t=0m36s it shows that it pulls apart easier under ring-loading.
There's a separate video somewhere on youtube that tests knots too and the yosemite finish ended up being weaker than a regular 8 for those results
I agree, I always tie a Yosemite finish in my figure 8 when lead climbing. The reason being is that a number of years ago my "stopper knot" got stuck in a quickdraw right at the crux. I thought I was being short-roped by my belayer, but it was just the knot and It was a real pain to get unstuck. The Yosemite solves that (probably rare) problem and is a really neat way to deal with any extra tail. It seems like with that extra strand in there that it should give the knot a greater bend radius and thus greater strength.
It would be interesting to see at what point a figure eight would break crossloaded but with a stoper knot
I'd endeavor to avoid either scenario.
DUDE! Great collab and great testing. Very interesting! Thanks sooo much! :-)
Great collab - really enjoyed watching both your videos. Over here in Europe the rethreaded double bowline is very popular as a bind-in knot, because it's a lot easier to untie than a figure 8 knot after a lead fall. Would be great to see how this not compares on your slack snap machine :-)
@HowNOTtoHIGHLINE By the way - the PayPal donation link on your Patreon page is wrong - while the link text is the right one, the link behind it always links to the donators own donation page and donating to myself doesn't make that much sense.
Thanks! I donate to myself daily when I work haha ;). I'll fix it.
Great work. I love failure analysis, it would probably be difficult or dangerous to be close to the knot, but I think a laser thermometer on the knot would be interesting:)
Great collaboration, thanks guys! 🙌
I completely thought this was hard was easy! Great Collab!
This is incredible. thank you!
It would be interesting testing a figure 8 against both a double bowline and a rethreaded bowline to see just how strong bowlines are.
Both of you are great I like the idea of collaboration especially when the subjects overlap!! Thanks guys
I keep hearing again and again that soap is bad for ropes, but as a chemist, I don't see how. Since you have some leftover rope, I'm wondering if you would do a few tests where you wash a rope in the washing machine line 100 times and see if there is a difference in the strength.
Detergents break down fibers
Soap is bad for natural fiber ropes, but natural is bad when wet anyway. As fir synthetic it really depends on what synthetic compound you are using. Chemically the variety of compounds used for rope fiber all have different physical properties and just guessing that soap “ in combo with sunlight over time “ is the real issue. You’d need to dig in some chemical safety sheets for properties. And once again back when that talk started chances are the “soap” actually being used would have been a strong detergent on a low quality synthetic rope. Not even “detergents” used now are the same as they once were.
Soap (e.g. sodium palmate and no residual sodium hydroxide) I'm sure is ok, you can even buy products for washing rope but the concern is if I use some kind of stain removing laundry detergent what's in it beyond soap. Not knowing is good reason not to do it. I remember hearing about a fatal incident (rope access) where the rope was chemically damaged on a chimney job. The abseil/rappel rope and shunt rope were the same (2 halves of same rope) and both failed under the workers bodyweight. Look after your rope!
ropes break washing machines
johnny cigar By placing them loose so they wrap around the agitator would be a yes (even if you tied the tails together). but one would place in a knit drawbag wouldn’t one (similar for how you wash linens) no? Or the overhand slip knot chain method like used on power cords, but then how clean would the rope really get?
such a beautiful collab!!!
i love both of your channels!!!!
When I did CSR my one buddy always did a safety knot with his tail after making finger eights. We used them for everything though. Anchors, belays, main line systems. I’m a big fan of them. Thanks for the great content as always.
Collaborations with Ben, love to see 😎👍
That intro!!! 😂 thanks for doing these tests 🙌🏻🙌🏻🙌🏻
Just seeing this channel; love the content. When I first learned climbing I was always taught to tie stopper knots at the end of the tail to keep the figure 8 from unraveling. It'd be interesting if you were able to test the strength of the rope with stopper knots/the stopper knots themselves. If you've already done that my apologies for missing it. Cheers!
No Yosemite finish tested from the Yosemite climber?? xD thx for the video Ryan!
That "shorter" tail was still plenty long, would be interesting to see how much force it takes to pull a 5cm or 7cm tail through
I'm just happy to know that I have to be careful to not let the 8 become crossloaded, so that after that 24kN yank, the empty harness can still be hanging from the 12mm winch line I was apparently being belayed on by a bulldozer. Makes finding the pieces my body was ripped into easier if they have the harness as a starting point.
loved the collaboration!
MELHOR Canal do RUclips.!
Melhor forma de mostrar para as pessoas não morrem por falta da informação técnica de verdade .
Ao vivo e a cores !
Obrigado.
Parabéns pela inciativa.
Can we just appreciate how stretchy climbing ropes are.
My half ropes are specified for 33% dynamic stretch (and that’s with only a 50kg test mass). It’s always a bit scary when you’ve climbed 40 or 50m and you realize that you’d easily “fall” >10m just from rope stretch alone. On the other hand it makes you stop worrying about being half a meter above the last quickdraw or using 60cm alpine slings. And of course it makes for a nice, soft catch.
Id love to see normal cams tested in slightly offset placements! Like back lobes slightly overcammed with the front ones at a perfect angle.
This channel always makes me feel really good about my choice of DMM steel screwgates...
Thanks für this very nice video. It would be interesting to see some other knots in comparison.
What abaut tying two ropes together? Which knot realy is strong? Butterfly, Fisherman, Overhand, Figure8(straight/sideways), some more....
I was taught to tie in the right way, which is also easier, back in the 70s. I was told the right way was 80% strand strength, and the wrong way was 65% strand strength. Apparently not so dramatic a difference in these tests, not that one expects nice round percentages to be dead on. I was lucky to be briefly in a club with an engineer who worked with the UIAA, and he later wrote their book on ropes.
I was a little surprised to see that most RUclips instructors recommend not thinking about this knot polarity issue, as their main concern is getting people to tie a figure of 8 correctly at all. Either method will stop that sinking feeling, but it is closer even than I had been told.
The reason I was told that the one way was stronger than the other was that it was tied so that the load line's first reversal is around a 3 strand radius, and not a two strand radius. This is a factor I incorporate in a lot of knots, and there are some not knot ways of incorporating it also. But as your test also shows, there is more to it than that as the knot is basically unstable when loaded, if tied incorrectly. The thing about that though, is how by the time it blows, either knot has seated into a form where it has moved into a more advantageous position. So maybe it is the radius issue after all.
Got it, If I ever cross load 5,241.6 lbs, I'll die. Good thing no one weighs that.
You should give an updated tour of the museum of slack
Where can I see the Spreadsheet with all the data?
Mad respect for the 2 of you! What's the conclusion though? That it doesn't matter how you tie your figure eight, the breaking strength more or less remains the same?
The breaking strength remains about the same, but in the companion video Ben showed pretty clearly that the "proper" figure 8 with the load strand on the inside of the knot is much easier to untie when subjected to normal climbing loads.
Yeah lol
Keep the dad jokes alive!! Lmao
So glad this ended up here!
Thank you for the video and knowledge
do you have a breaking test of figure 8 vs bowline?
Sweet. Another groovy channel. Thanks for your work. I'm in Australia so I'm not sure how much I can support your coffee...
Good cooperation! Jeep on going.
Now double bowline verse figure 8
Yes, please do a double bowline. But consider that there also many ways to tie this knot (inside/outside/over/under).
Thank you for all of your work!!👍
That guy with hard is easy at the beginning of this vid has a very good explanation of the F8 in his full vid - it will change your mind on stuff....
Thaks for test! And special for open data test results! What about ringloading for kalmyk loop vs holland bowline
Colab was awesome. Would love to see an even shorter tail figure 8 so it actually pulls through.
I had this exact same thought. If the tail pulls through the 8, would it still hold some amount of force? Ie. 10 kn-ish. There's probably a video out there already, I just haven't found it yet.
how strong is a double bowline knot vs. a figure eight knot
Please test crossloading the strains! Like an Alpine Butterfly, but a figure 8. Pretty Please!!! Love the channel!
I am watching these videos to increase my faith in climbing equipment.
Would you mind testing a figure-eight on a Yosemite finish (figure-eight follow through)? Might be interesting to see what happens there
In a lead climbing fall, where is the rope most likely to break? At the knot or at the first quickdraw? What about sharp rock edges?
a knot will almost always be the weakest point of any rope, barring any other factors. sharp edges can cut rope under loads as small as body-weight in the right conditions
8:59 "Look, a scrunchee" XD
I would like to see what you can load the rope and still untie it (without a sledge).
That sure does look like a 9.9 black diamond rope....I could be wrong though.
Interesting experiment !!
You have an old guidebook for Sächsische Schweiz on your shelf? wow, how comes that?
Great job and very interesting
What does a figure 8 with Yosemite finish break at?
Thanks!
What's the manufacturers listed breaking strength of that rope?
Good collab!
Love it!!
Great stuff!
Wouldn’t tying a “stop knot” or “safety knot” stop the tails from sliding if you cross load a figure 8 ?
I beleive the open source lab results are not anymore available on your website?!
At 12:19 I was expecting you to say "so finish it with a barrel knot" haha
So much curiosity about other knots, and ropes... Will the slack snap break 3/4” amsteel + with class II eyes splice?
What's the song at the end
can you do the same test with a bowline knot?
I really wanted to see the strength of a figure8 'bunny ears' knot, where you take a bight through and loop it over the knot, giving you two loops to clip into. THis is handy for getting two independent loops for your two toprope biners, or to have a master-point plus a tie-in point.
My guess: each of the two bunny ears would be as strong as a single one.
Great job 👍💯
When tying in with a fig 8 I always leave a tail and tie a barrel knot in the tail round the load strand. Done it for last 28 years of climbing and never seen anyone else do it (other than for industrial access work). Seeing that tail slip when loop-pulling I feel happier that it's not just a silly superstition of mine and it's actually a good thing to do. Maybe the added barrel knot is a Yosemite finish to the 8 ;)
One can obviously do that but it's not necessary for a figure eight because once pulled tight it doesn't roll - it might tighten by another 5cm (2in) but if your tail is at least 10cm (4 in) long it's safe enough even without this stopper or barrel knot
Everyone at my gym does this. It's pretty standard in CA. Mainly because the gyms have insurance dudes who don't know what the fuck they are talking about and think 2 is better than one !!
Excellent
Could you pls test the figure of 9? and figure of 8 with the tail re-threaded?
I suspect that the tail re-threaded will make the know much stronger - as it will make the bend radius of the load strand larger
“Didn’t grunt enough.”
Wonder what happens if you cross load a figure 8 with a stopper knot? Is it kind of safe?
Can you guys break a few types of quickdraws?
I bet he will if you send him some!
'cross loading' the figure eight is called 'ring loading'
Another one of your videos I would love to see done on static line as well.
Could you test a double bowline which is many peoples second choice, or at least the other option.
I would love to see a test of the problem of rolling when you connect two ropes for rappel with a figure of eight compared to two overhand knots, greetings from switzerland :)
Use a double fishermans when connecting two ropes.
@@red90rover98 yes and no, works great but gets stuck easier, two overhand is aswell save
Red90rover 🤔 I wonder how well a figure eight would fare if the tails were on opposite ends like the double fisher mans? 🤔
@@heli400 you don't have the problem of rolling anymore, i hear people telling it's ok to use like that
@@staibock5456 I figured as much, because the knot would just tighten on itself like the fishermans, probably get stuck easier tho :/
Wonderfully insightful from both of you! Wish you would continue the collaboration: 1 + 1 = 3 (synergy of thought and creativity). Best wishes, and thanks! Fun to see two different, but equally intriguing personalities styles and approaches at work together! : )
I expected the rope wit figure 8 to loose 25-30% of it's strength as they say in most literature, but in these tests it surprisingly lost around 45%. How can you explain tis disparity?
How about a two-loop figure eight versus a figure eight?
I would like to see you test normal paracord with various configurations and knots. I would also like to see variant brands tested, from the perceived best to the stretchiest. I would like it compared to dyneema of a comparable diameter and or strength.
If you double a loop for instance is that twice the strength? Triple. hold it in a web-lock?
Nets would be really hard to test. However, ...
What about a Yosemite finish? Does that weaken the figure 8 at all?
You haven't done the zeppelin bend yet ?? I went through the excel and couldn't find it. Also you can try the zeppelin loop. It would be interesting to see how it compares. Also interesting to see how easy/hard it would be to undo afterwards. Thanks a lot guys
explains the times a fig 8 broke hauling a car out of the snow. never knew about orientation of load strand.
Don't leave the blade exposed at any time. Your cat may have jumped on that stool :)
Watching the cross load was interesting i knew that they roll out but would you do different ways people join ropes for rappel. Euro death, double fish, figure 8?
Does that kitten do any slack line
At what point does the fig-8 loop fold over? 23kN is really high. If the folds at a force that's also really high, it might not be something to worry about in the real world?
I'm also super intrigued, it didn't even undo with short tail at 23kN. Wouldn't just longer tail or backup knot make it very useful?
I think the problem is that a lot of small chock even with low forces can undo it with time
How much strength comes from the grunt?
13kn Normal y 23kn mal usado... entendí bien? soporta más si se usa mal? (si entendí que se corre por eso no es seguro)
Breaking or pulling out some pitons, knife blades, arrows would be cool to see!
If you cross load figure 8 (the last test), would a stopper knot save you? or even just tying a figure 8 stopper at the end of the short end (that would slip out in this situation?)
I want to see the Yosemite finish with figure 8 as well as double bowline