DeLorean - Metal Earth - Build with me!
HTML-код
- Опубликовано: 7 сен 2024
- Welcome to the Groove Builders RUclips Channel! In this build we go step by step with the Metal Earth DeLorean. All the hard bits and some of the easy ones are all here for us to build together. This is an awesome car and i've been looking forward to building this since its release. I may have even recommend this model to get built along with all of you on the Metal Earth Sub reddit! Let's get to it shall we :)
If this video helped you make sure to leave a like and hit Subscribe for more building content.
Wan't to help the channel grow and build cool stuff too? Check out our new Store!
www.Groovebuild...
Find us on
Instagram - Groove.Builders
Twitter - @GrooveBuilders
Tools
www.etsy.com/s...
Category
Bought this one today😅
But I didn't wore gloves😬
The pedals gave me headache so I looked here and found your instructions🙃
I'll continue to build today in the evening.
I am currently building this one. This helped a lot. Thank you
Sorry everyone had to re-upload this one. I can't believe GB1 forgot to put the instructions in on such a hard build!! I hope you enjoy!
I just bought one of these kits. Thank you very much for the video.
Google is your best friend. I googled looking for a digital instruction thing (like 3d lego instructions kinda thing.) found your video, this is saving me rn. EDIT: My body snapped in half and the center console broke also...
Thanks. Very good demo build.
just got my DeLorean build from Bartells. thanks for the video!
this my first build. going to get some tools for sure. thanks for the tips again.
Thanks and good luck! It’s a great build and even better looking model
Just discovered your channel, thanks for the quality of your videos! This may be my favorite build out of the dozen or so I’ve made so far. But that steering wheel! I almost glued it on the column because I just hated the way the tabs fold whether you fold them in or out! Has anyone else noticed how terrible the 3D build is on the Metal Earth webpage?! It looks like a 5 year old put it together!
I've also noticed the build quality of the 360 degree views is pretty awful overall. Their tabs stick out all over the place! It seems like these should be done with much more care as they should be representative of just how awesome these models can look if they are done right.
Yes I had all sorts of trouble, and then I dropped it and have been unable to find it 😳
Very Nice kit. Will buy in the future and thank you for the vid!
thanks for watching, its a great build!
we have the same mouse pad. I had to look twice , haha
Thank you🙏🙏
"I'm not really much of a car guy, although I do love the DeLorean". C'mon, who doesn't? haha
When it came out a lot of people disliked it mainly because of the engine and transmission. Also the car had no color. the only reason why people like it is because of back to the future. Which is why I think it would be cool if metal earth made the back to the future model
I finally get the tools I need, get started & not even past the first three instructions, I have to use RUclips/Google. Turns out I was doing it wrong so I tried rebending to the proper angle & it snaps. I'll stick to Gunpla, at least that I can do.
Don’t give up just yet!! If you contact Metal Earth they will send you a new one.
This is a harder model to start with but when your done I think you will see why so many love the hobby. Gunpla is great though. I’m trying to figure out which one to start with on the show
@@GrooveBuilders The HG model (easy mode of Gunpla) of the RX-78 Gundam is always a decent starter. But if you're already a decent builder, jump into RG models (medium difficulty)
Thank this held a lot
Help
It’s impossible. For me at least. The parts are a pain in the a** to take out. Also very hard to put the pins inside the slots. I would love to finish it but I’m struggling way to much:(
Hey Jacob,
This build can be very complicated. First if you break any piece, contact Metal Earth and they'll help you replace them. Their support team is super friendly.
Second I recommend using a pair of nippers to help you take the pieces out of the sheets. If you don't have some around the home you could also use some cuticle cutters or nail clippers. I recognize not everyone has tools like I do but looking around your home to get some alternative is a good idea. Crayons, markers, wooden dowels, a spoon or maybe even some kind of statue that you might have that can be used for getting different odd shapes are great.
Don't give up just yet. It's a hard model like I said but when your done your going to be so glad you didn't stop.
I hope this helps :)
@@GrooveBuilders thank you. I will keep trying!
For the steering column, part A 30, it rolls perfectly around a 3/64" inch bit. (Dremel)
As for putting it on the steering wheel; !*?~💩
Great vid.... definitely would have been stuck in places if it wasn't for the vid. Some instructions are a bit vague
Are cutters/tweezers necessary?
Yes,
Nippers to cut the parts out and tweezers to form.
You can you mail cutters and simple tweezers though :) also around your home you can find things to help get the right shapes too. Spoon, drill bit set, wood handles etc
1234 what a car she really been soo far🙊🙉🙈
They gotta fix the damn instructions. Make it more clear
Where did you get those tweezers?
Hey Colton,
I currently source my own because I'm trying to make a line of tool. These ones are ok but im still not 100% sold on them. I have about 25 sets. if your interested let me know through IG.
Have a great night and thanks for watching!
I would also like to know where you got you tweezers
need tutorial Mazinger z metal Eartth :( :(
Would not recommend buying this unless you are very good with small models and have the right tools, mine randomly snapped right in half where it was bent. and since it's so small I cant glue it
That happens from time to time :s If you give metal earth a quick email they will help you out :) they have a great team.
What part did you get stuck at?
@@GrooveBuilders I was moving on to step 8 and the step 1 peice snapped because it bent back and forth to much, I tried to keep it from moving because I saw that coming but I didn't have the best working space so I'll probably try to fix it and find better tools. Honestly metal earth makes some cool stuff and your video was very helpful I was just a little annoyed thanks for the help!
My #1 piece broke 1 hour in 😥
i need tutorial Mazinger z metal Eartth :(
I just had to look that up.. super cool. I reached out to there IG and I’m looking into grabbing that guy off eBay if I can find it at a good deal.
Thanks for letting me know about them :)
@@GrooveBuilders thanks!!
I bent a piece too much and it broke, probably because of my lack of tools. Oh, well.