Experience using Brother GTX with some GTX and Hoodie printing tips

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024

Комментарии • 46

  • @elroycharlie
    @elroycharlie Год назад +2

    Great real world reView !!!

  • @rafiahtidal9892
    @rafiahtidal9892 Год назад +1

    Hello sir, I have problems with correct pretreatment, for black tshirts what speed and pressure you set for pretreatmaker iv? Thank you very much.

    • @amedionteo
      @amedionteo  Год назад

      Hi we dont use pretreatmaker so have no idea. What ratio u mixing now with water? What brand pretreatment?

  • @kreativejunkietv8876
    @kreativejunkietv8876 2 года назад

    So I purchased a used GTX and it has sat in my garage for 6 months. its completely empty with no ink. I went to plug it in and it will not power on. The temperature in my garage is maybe 40 degrees Fahrenheit. Can you help me with this problem, and where can I get a new usb card to install on the unit. Mine is damaged.

  • @FidelElvira
    @FidelElvira 3 года назад

    I had the same problem and I called a technician y told me to reduce that problem I had to enclose the underneath and I add a dehumidifier and in my case the temperature it was an issue as well so I added a little heather under there too and that stop the issue

    • @amedionteo
      @amedionteo  3 года назад

      Yeah if humidity and temperature out of range then it will run more frequent.

  • @user-nj6dg8ti4h
    @user-nj6dg8ti4h Год назад

    Have you tried replacement inks? Do you always use chips to fill your GTX PRO BULK machine?

    • @amedionteo
      @amedionteo  Год назад +1

      Yes cause its provided.

    • @user-nj6dg8ti4h
      @user-nj6dg8ti4h Год назад

      @@amedionteo Have you tried an undamaged chip?

    • @amedionteo
      @amedionteo  Год назад

      @@user-nj6dg8ti4h what u mean by that? Chip provided is usable. If damaged can exchange.

    • @user-nj6dg8ti4h
      @user-nj6dg8ti4h Год назад

      You don't have to use it, you can raise the ink level manually in the machine.

    • @user-nj6dg8ti4h
      @user-nj6dg8ti4h Год назад

      Why don't you want to use replacement inks?

  • @rhubartyoung438
    @rhubartyoung438 3 года назад

    Hello Idol can you share us your print setting for white and colored shirt.. settings of your Highlights and Mask saturation, Brightness, Contrast and cmyk for better resolution and detaild in printing.. thanks in advanced Idol!!

    • @amedionteo
      @amedionteo  2 года назад

      I set Highlight at 5 and Mask 3 for all t-shirts. For thicker materials I increase highlight to 6. Thats' all. Other settings don't touch.

  • @danieljacobs5854
    @danieljacobs5854 3 года назад

    Im not getting any white to print. No white on test print. We did all cleaning of the parts. We did super clean. We did white ink circulation. Nothing.... any tips?

    • @amedionteo
      @amedionteo  3 года назад

      Check if your pouch put in correctly with the gold stripe rolling it up nice and tight.

  • @Abdulrahimabuaker
    @Abdulrahimabuaker 3 года назад

    Hi . Where do I get one, and what is the price for it ?

    • @amedionteo
      @amedionteo  3 года назад

      What item u referring to?

  • @01234567896405
    @01234567896405 2 года назад

    Can you reuse that wastage of ink?

    • @amedionteo
      @amedionteo  2 года назад

      Waste ink cant re-use. :)

  • @hamizishah3177
    @hamizishah3177 3 года назад

    Hi, I'm also have that machine, did you always on that machine everyday? Sometimes I not using it on 2 weeks but I'm always running it for white ink circulation everyday, but I noticed my white ink decrease. It's seem wasted for me, eventhough I'm not using it... Any suggestions for saving white ink

    • @amedionteo
      @amedionteo  3 года назад

      No we don't switch it off cause we use them everyday. If you're not printing volume then this machine not suitable for you. It will run cleaning every 6hrs. Best is to switch it off if you're not using then but not for too long.

    • @hamizishah3177
      @hamizishah3177 3 года назад

      @@amedionteo , most of my clients and my work demand me to do silkscreen and microfiber, 😂 I already buy that dtg machine for further expand my business cause some silkscreen can't achieve dtg result. Did you using microfiber /jersey on dtg machine. Give some tips, cause my supplier not recommend me to dtg on microfiber /jersey

    • @amedionteo
      @amedionteo  3 года назад

      @@hamizishah3177 no i dont DTG on microfiber cause its not productive. Lots of issue and processes i rather just heatpress.

    • @hamizishah3177
      @hamizishah3177 3 года назад

      @@amedionteo ,I already saw your another video about dtf printing using dtg machine, can you provide me your supplier no, I'm also from Malaysia. Tq

    • @amedionteo
      @amedionteo  3 года назад

      @@hamizishah3177 u bought Brother GTX in Malaysia?
      U source around for DTF supplier. My supplier is freaking expensive and im looking for other now

  • @FidelElvira
    @FidelElvira 3 года назад

    What brand pretreatment did you use for the sweatshirts?

    • @amedionteo
      @amedionteo  3 года назад

      We're using third party pretreatment by Onetextiles.

    • @FidelElvira
      @FidelElvira 3 года назад

      @@amedionteo do you think they sell it in USA? And what is the name of the pretreatment

    • @amedionteo
      @amedionteo  3 года назад

      Nope don't think so. Got one company selling similar product. You can search for DTG Connection.

    • @FidelElvira
      @FidelElvira 3 года назад

      @@amedionteo Thank you!

  • @kristiangonzalez6459
    @kristiangonzalez6459 3 года назад

    Where do you buy the inks

    • @amedionteo
      @amedionteo  3 года назад

      From Brother of course. ;)

  • @myronwafu3369
    @myronwafu3369 3 года назад

    For 50/50 hoodies what temperature fo you use to cure the ink? Also how long do you hover?

    • @amedionteo
      @amedionteo  3 года назад

      We dry the PT for a little over a minute with 160-170celcius.. Curing for 160celcius on 60s.. Depends on design and color of the hoodie. If red hoodie definitely need hovering.

  • @redarerto3
    @redarerto3 3 года назад

    Hi bro can you tech me make the platen for brother gtx by yourself ?

    • @amedionteo
      @amedionteo  3 года назад +1

      Sorry bro we don't make custom platens. ITs genuine from BRother.

    • @redarerto3
      @redarerto3 3 года назад +1

      @@amedionteo Thank a lot bro.