Carved the USMC emblem using the

Поделиться
HTML-код
  • Опубликовано: 2 янв 2025

Комментарии • 80

  • @ronnorris1504
    @ronnorris1504 11 месяцев назад +3

    Great little project! i'm starting to use MDF more in my carving project. Seems to work really well as long as you seal it and a newer bit does help. As always, thanks again.

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад +1

      Thanks Ron! I like mdf too much.

    • @deplorable_2024
      @deplorable_2024 6 месяцев назад +1

      MDF has glue in it which can be harder on blades and cutters.

    • @encarwoodworking
      @encarwoodworking  6 месяцев назад

      @deplorable_2024 Very true and thanks for reminding me to buy new bits.

  • @achdee55
    @achdee55 11 месяцев назад +1

    Beautiful, nice work. Just got my Onefinity and just subscribed to your channel.

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад

      Thank you for watching and subscribing! You will really enjoy the CnC and make wonderful things.

  • @taylorkatt8723
    @taylorkatt8723 4 месяца назад +1

    Very sharp, Marine. Well done!

  • @MattMadeIt123
    @MattMadeIt123 7 месяцев назад +3

    Project looks fantastic. Semper Fi!

  • @joepie221
    @joepie221 6 месяцев назад +2

    Nice work.

  • @brandoncollins5694
    @brandoncollins5694 11 месяцев назад +1

    Looks great!

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад

      Thank you Brandon! I appreciate your kind words!

  • @kevinrich4637
    @kevinrich4637 11 месяцев назад +1

    Nice job. Just got my Woodworker Elite. New subscriber.

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад

      Thanks for watching and subscribing Kevin! You will enjoy your elite. I think eventually I’ll do the upgrade to elite.

  • @UserZO5672
    @UserZO5672 6 месяцев назад +1

    Awesome work!!!

  • @RayWest-su5xn
    @RayWest-su5xn 9 месяцев назад +2

    I am an old Marine and I have an Avid CNC. Would it be possible to get a copy of the G-code you generated? Thanks in advance for your help. Good video.

    • @encarwoodworking
      @encarwoodworking  9 месяцев назад

      Ooorah! I tend to clear my thumb drive of the G codes but I’ll try to find if I have it.

    • @RayWest-su5xn
      @RayWest-su5xn 9 месяцев назад +1

      Thanks sir!

    • @WabiSabiCustomsLLC
      @WabiSabiCustomsLLC 9 месяцев назад

      Any luck for a Salty Dog?@@encarwoodworking

    • @iwannaapple7190
      @iwannaapple7190 9 месяцев назад +1

      @@encarwoodworking
      Just in case you ever want to do it because you deleted your files of your thumb drive, you might want to know that you really didn't and they can be retrieved. You can think of it as putting your foot in the mud. Your foot may not be there anymore but your foot print still is. It easy to google the code...or it used to be anyway.

    • @encarwoodworking
      @encarwoodworking  9 месяцев назад

      @iwannaapple7190 that’s good to know. I’ll try to hunt it down that way

  • @rrosbr
    @rrosbr Месяц назад +1

    Hello, I’m a Marine and just got my CnC. Where can I find the VCarve/gsender file for the USMC EGA?

    • @encarwoodworking
      @encarwoodworking  Месяц назад

      Hey brother! I can’t remember if I bought the files off Etsy as a package deal or off the FB groups. But I’m sure if you check out the FB groups under their file section someone posted a file.

    • @rrosbr
      @rrosbr Месяц назад +1

      Excellent! Thank you Brother! And keep up the outstanding work!!

  • @unclebob8746
    @unclebob8746 8 месяцев назад +2

    What exactly is the blue film you used? Semper Fi. RVN 30MF11

    • @encarwoodworking
      @encarwoodworking  7 месяцев назад

      So sorry for the late reply. It is oramask. I got it from Amazon!

  • @lawcribb6954
    @lawcribb6954 7 месяцев назад +1

    Great job looks great i have been carving a lot of cherry with my CNC I will have to try MDF again its been a while

    • @encarwoodworking
      @encarwoodworking  7 месяцев назад

      I like MDF a lot since it is inexpensive, but it is hard on the bits. I appreciate you watching and the kind words!

  • @jimanderson9483
    @jimanderson9483 5 месяцев назад +1

    I love this. I would love to make something like this for Army Military Police. Any idea where I could find a file for this?

    • @encarwoodworking
      @encarwoodworking  5 месяцев назад

      If I remember correctly it was either in the file section of a FB group or Etsy. Thanks for your kind words and for watching!

  • @EricVadala
    @EricVadala 4 месяца назад +1

    I’m new to CNC and learning. Did you do a rough cut first then a detail pass? Also what was your bit choose on this project.

    • @encarwoodworking
      @encarwoodworking  4 месяца назад +1

      So for this piece I did not do a rough pass. I used a 60 degree vbit for the entire piece then a 1/4 downcut end mill for the profile pass. Welcome to the world of CNC and the rabbit hole!

    • @EricVadala
      @EricVadala 4 месяца назад +1

      @@encarwoodworking pretty simple. I always like to ask to keep a mental note.

  • @LarryWSkeen
    @LarryWSkeen 5 месяцев назад +1

    Where can I get a copy of this design layout?

    • @encarwoodworking
      @encarwoodworking  5 месяцев назад

      I bought this file on Etsy but im sure this can be found on numerous FB groups as well. But the ones I found on FB tends cleaning up in node editing.

  • @rogercharlie
    @rogercharlie 11 месяцев назад +2

    Lovely result. You are putting your machine to good use. Did you creat the vector yourself?

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад +3

      Thank you! I did not create the vector. I honestly don’t remember where I got it. It might have been from thingiverse or the numerous FB groups I follow.

  • @totoffe6234
    @totoffe6234 7 месяцев назад +1

    Je débute en cnc et quand je vois réalisé ce projet magnifique et surtout en mdf et votre papier collant (je sais pas ce que c'est comme papier) je me dit vivement que sa arrive chapeau M l'artiste.

    • @encarwoodworking
      @encarwoodworking  7 месяцев назад +1

      Bienvenue dans le monde de la CNC. Je sais que vous apprendrez et réaliserez de grands projets. Merci d'avoir regardé !

    • @totoffe6234
      @totoffe6234 7 месяцев назад +1

      @@encarwoodworking Excusez moi j'ai une petite question c'est quoi le produit ???? que vous mettez à 0:23 de la vidéo
      Merci d'avance pour votre retour.

    • @encarwoodworking
      @encarwoodworking  7 месяцев назад +1

      C'est oramask 831 (a.co/d/amj4gtr).

    • @totoffe6234
      @totoffe6234 7 месяцев назад +1

      @@encarwoodworking Merci mais page introuvable

    • @encarwoodworking
      @encarwoodworking  7 месяцев назад +1

      Désolé, le lien ne sera pas publié pour une raison quelconque. Il vous suffit de rechercher oramask 831 dans votre navigateur ou sur Amazon.com

  • @spiveyt
    @spiveyt 4 месяца назад +1

    Why put shellac on it before cutting?

    • @encarwoodworking
      @encarwoodworking  4 месяца назад +2

      It helps the oramask to stay in place when I begin carving. Thanks for watching!

    • @elmeradams8781
      @elmeradams8781 2 месяца назад +1

      What does the oramask do?
      Could you sand the top instead?

  • @user-wx5ev6nz2o
    @user-wx5ev6nz2o 11 месяцев назад +1

    What bits did you use to make this? I have a friend who is a Marine so you definitely got my attention with this

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад +2

      I appreciate you watching the video!! The bits used were a 60 degree vbit for all the lettering and graphics then a 1/4 down cut end mill for profile cut

  • @markgreen2770
    @markgreen2770 11 месяцев назад +1

    Where can I find the file?

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад

      To be honest with you Mark but I don’t remember 😭. But if I had to guess it would be from one of the numerous FB groups associated with CNC/Stl files etc. sorry I couldn’t be more helpful

  • @mikel4510
    @mikel4510 2 месяца назад +1

    USMC emblem is called the EGA (Eagle, Globe, & Anchor), and is trademark protected.

    • @encarwoodworking
      @encarwoodworking  2 месяца назад +2

      Thanks for your concern. Recreating is fine just as long as I do not sell or redistribute.

  • @cuervose
    @cuervose 11 месяцев назад

    Awesome

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад

      Thank you for watching and the kind words!

  • @unclebob8746
    @unclebob8746 8 месяцев назад +2

    Should be 03mf11

  • @yepitsodex
    @yepitsodex 2 месяца назад +1

    someone buy this man an exacto knife

  • @petebernard218
    @petebernard218 11 месяцев назад +1

    👍

  • @robertsmith3518
    @robertsmith3518 5 месяцев назад +1

    What is the plan ? Are we
    Supposed to read your mindset ? Somebody else can have my seat ,I like the talking videos . . Sorry dude but your channel
    1 star at best

    • @encarwoodworking
      @encarwoodworking  5 месяцев назад +1

      Thanks for watching anyways!

    • @ronhansen7717
      @ronhansen7717 3 дня назад

      Those that can, do. Those that can't, complain.

  • @raydeese4439
    @raydeese4439 11 месяцев назад +1

    It's not a carving project if the machine does the carving it's a cheap Chinese type of product. That's all it is.

    • @encarwoodworking
      @encarwoodworking  11 месяцев назад +3

      I appreciate you watching and opinion either way!

    • @rickenterkin4720
      @rickenterkin4720 9 месяцев назад +8

      Bro, why you so mad. You mad cuz you don't have the tools to do it? The machine to do it? The know how to make the machine carve it out? You mad cuz his hustle is better than your hustle?
      Poor guy.

    • @encarwoodworking
      @encarwoodworking  9 месяцев назад

      @rickenterkin4720 I appreciate you my friend.

    • @rickenterkin4720
      @rickenterkin4720 9 месяцев назад +1

      @@encarwoodworking I want 1 of these so bad. So much potential. Keep up the great work ole son. Enjoy the videos.
      GOD BLESS.

    • @encarwoodworking
      @encarwoodworking  9 месяцев назад

      @rickenterkin4720 thank you! 😊