Great video and really helpful thanks. One thing I couldn’t get my head around when setting it up which in the end was pretty obvious is that whichever track you’re trying to sample you need to select the same channel of the deck you’re using to sample on the FX on the mixer in order to get the signal to the DJS. Keep up the good work and anymore videos on the DJS will be greatly appreciated
Cheers dude! I've been djing for over 20, years, and as bad as it sounds the cdjs made it a bit.... Boring, they removed the challenge a bit. I've nkt had as much fun playing music since managing to mix on 1210s with this unit. It's endless, highly recommend but it does ask for time to be spent on it
Very good tutorial. I have had this sampler from Day one. Never used it . Reason due to pioneer dj poor promotion and lack of tutorials. All you would see on pioneer web page is DJs show boating, not teaching any thing. Great job man very good tutorial keep them coming.
another excellent DJS-1000 concept + real world use, with all the necessary details. if you look at the history of 'samplers' one would be hard pressed finding one with sampling abilities that were greater than what's possible using the DJS's two primary external sampling modes (LIVE SAMPLING as shown in this video and SAMPLING/EDIT), RESAMPLING (internal sampling of audio with any applied fx1 or performance fx and/or modulation captured as audio), and AUDIO RENDERING (track/pad or master recorded as wav per each Pattern) coupled with the immediacy and performance friendly (or at least 'usability') access/use of what's just been sampled. lots of samplers do many groovebox things better than the DJS can, any many have deeper sampling abilities in one or two modes, but nothing compares to the ease of sampling, saving, and then ejecting the usb or being able to Live Sample and then have it begin playing immediately, in time and quantized with instant slicing in real time. anyway, i look forward to the next one
I JUST LOOKED AT YOUR VIDEO! GREAT PRESENTATION MY BROTHER! ONE THING I CAN SEE IS, SOMEONE REALLY NEED TO GET FAMILIARIZE WITH ALL THE FEATURES OF THE EQUIPMENT. OTHERWISE, SOMEONE WILL BE TOTALLY LOSS AND FRUSTRATED. WHEN THINGS DON'T WORK OUT RIGHT!
Good video, I have the DJS and the SP-16 and think they're great machines. Correct me if I'm wrong but when sampling looping audio and the start isn't in the correct place you can move the position of the start as the sample wraps around? Not that it matters in this case if the sample is triggered but it would if it's going to be looped. Would have been nice to have quantized recording, maybe in the next firmware update🤣
I am looking to sample audience response live with the DJS 1000, and I was wondering if you know if you can adjust the output like increase it if needed or lower it after recording.
@@garyusinger if you plug a mic or set the mixer to record the mic input that shpuld give you your crowd, you do have your input level to play with.. Failing that yoi can tale levela from 100 to 124 on volume or use the compressor effect on the sample to make it louder. Or simply lower your sample volume of you want ot lower
Great video on this topic, thank you for creating this! I am not a DJ, but rather look into adding a performance sampler / looper to my live setup. That's based aroudn a couple of drummachines such as the 909, 808 and an Akai MPC plus some synths like the 303 and so on. I tried an #AkaiRemix16 before, but that's not flexible enough. An #Octatrack would probably fit the bill very well, but a 4x4 pad matrix and the immediacy of use here with the DJS-1000 is great! I wonder if the sampling process can be somewhat synced to the CDJ. As in the start and end points. Since the CDJ already "knows" where the grid is with the audio, it would be cool if the DJS could just sync to that for the requested snippet length. Even transferring a loop directly to the DJS would be a cool idea. As a "send this loop to the DJS"-function on the CDJ. So you would not have any changes on the audio when going through the mixer. Maybe that Link-protocol is capable of sending audio from one device to another? I am not familiar with Pioneer DJ gear. But I recently was given a RMX-1000 and was really surprised how usable that box is. So I am researching the DJS-1000 a little these days 🙂
I believe the quantise does snap it to the beat better than relying on your own ability, I've not fully experimented with the quantise on different settings to confirm this
@@SurfMusicGoodstuff from vinyl? Pops could be clipped audio, turn your gains down a touch maybe? Alternately if ita part of ypur source audio, put it into pro tools or some editing software and tidy it up
@@SwiftSystems1 depends on wbat you want to achieve really. I go for music first, things tjen stand out in a track i want to play about with and tjen go about tryong ro sample it. Sometimes irs an easy cut, others... May need a little adjustment. I find the ai tools for track separation are faorly decent for most tracks. Some dont work, but others are perfect.
Hey can someone help me out I have a 2 T flash drive it's formatted to fat32 l load samples onto it through rekordbox and I'm still not able to see my samples when I load in onto my SDJ 1000 can someone tell me what I'm doing wrong or not doing
FINALLY an EZ to follow demonstration how to pull samples from the CDJ to the DJS. Thank you!
Not a problem!
Great video and really helpful thanks. One thing I couldn’t get my head around when setting it up which in the end was pretty obvious is that whichever track you’re trying to sample you need to select the same channel of the deck you’re using to sample on the FX on the mixer in order to get the signal to the DJS.
Keep up the good work and anymore videos on the DJS will be greatly appreciated
Nice work, really well done tutorial
This was a great demo. Thanks. Keep them coming
Really love your videos. Been contemplating on purchasing the DJS 1000 and your content really helps me in making that decision.
Cheers dude! I've been djing for over 20, years, and as bad as it sounds the cdjs made it a bit.... Boring, they removed the challenge a bit. I've nkt had as much fun playing music since managing to mix on 1210s with this unit. It's endless, highly recommend but it does ask for time to be spent on it
Amazing, this remix is very club friendly 🕺🏿
This demo solidifies the question why, when we see these for retail price even at second hand and no box or manual.
Very helpful. Thank you!
Amazing demo and great explanation of the DJS-1000, thanks a lot for sharing your knowledge!
Very good tutorial. I have had this sampler from Day one. Never used it . Reason due to pioneer dj poor promotion and lack of tutorials. All you would see on pioneer web page is DJs show boating, not teaching any thing. Great job man very good tutorial keep them coming.
Cheers man! Been short in time recently... Any thing you'd want a video made about? Could do with some topics to cover
@@symondodj I would appreciate see a tutorial on the sequencing section of the sampler. 👍.
@@DJMANICO1 leave it with me!
another excellent DJS-1000 concept + real world use, with all the necessary details. if you look at the history of 'samplers' one would be hard pressed finding one with sampling abilities that were greater than what's possible using the DJS's two primary external sampling modes (LIVE SAMPLING as shown in this video and SAMPLING/EDIT), RESAMPLING (internal sampling of audio with any applied fx1 or performance fx and/or modulation captured as audio), and AUDIO RENDERING (track/pad or master recorded as wav per each Pattern) coupled with the immediacy and performance friendly (or at least 'usability') access/use of what's just been sampled. lots of samplers do many groovebox things better than the DJS can, any many have deeper sampling abilities in one or two modes, but nothing compares to the ease of sampling, saving, and then ejecting the usb or being able to Live Sample and then have it begin playing immediately, in time and quantized with instant slicing in real time. anyway, i look forward to the next one
Thankyou! I shall try to keep more content coming
Brilliant video - easy to follow and excellent tips
You'll just have to try it!! 😁
Excellent video
Great video boss ! It’s exactly how I have things setup except I have sp-16.
Wow amazing thanks for the video. I’ve got a FLX10 and was wondering if this would work on that Ddj controller?
I JUST LOOKED AT YOUR VIDEO! GREAT PRESENTATION MY BROTHER! ONE THING I CAN SEE IS, SOMEONE REALLY NEED TO GET FAMILIARIZE WITH ALL THE FEATURES OF THE EQUIPMENT. OTHERWISE, SOMEONE WILL BE TOTALLY LOSS AND FRUSTRATED. WHEN THINGS DON'T WORK OUT RIGHT!
Good video, I have the DJS and the SP-16 and think they're great machines. Correct me if I'm wrong but when sampling looping audio and the start isn't in the correct place you can move the position of the start as the sample wraps around? Not that it matters in this case if the sample is triggered but it would if it's going to be looped. Would have been nice to have quantized recording, maybe in the next firmware update🤣
Muito show 👏🏾👏🏾👏🏾
I am looking to sample audience response live with the DJS 1000, and I was wondering if you know if you can adjust the output like increase it if needed or lower it after recording.
@@garyusinger if you plug a mic or set the mixer to record the mic input that shpuld give you your crowd, you do have your input level to play with.. Failing that yoi can tale levela from 100 to 124 on volume or use the compressor effect on the sample to make it louder. Or simply lower your sample volume of you want ot lower
@@symondodj Thanks for the reply!
thank you for the lecon🙏
Great video on this topic, thank you for creating this! I am not a DJ, but rather look into adding a performance sampler / looper to my live setup. That's based aroudn a couple of drummachines such as the 909, 808 and an Akai MPC plus some synths like the 303 and so on. I tried an #AkaiRemix16 before, but that's not flexible enough. An #Octatrack would probably fit the bill very well, but a 4x4 pad matrix and the immediacy of use here with the DJS-1000 is great!
I wonder if the sampling process can be somewhat synced to the CDJ. As in the start and end points. Since the CDJ already "knows" where the grid is with the audio, it would be cool if the DJS could just sync to that for the requested snippet length. Even transferring a loop directly to the DJS would be a cool idea. As a "send this loop to the DJS"-function on the CDJ. So you would not have any changes on the audio when going through the mixer. Maybe that Link-protocol is capable of sending audio from one device to another? I am not familiar with Pioneer DJ gear.
But I recently was given a RMX-1000 and was really surprised how usable that box is. So I am researching the DJS-1000 a little these days 🙂
Fun stuff. I miss mines
Thanks for the video. Is there a way to tighten the sample recording using sync and Pro DJ link? Rather than relying on your human timing? Thanks.
I believe the quantise does snap it to the beat better than relying on your own ability, I've not fully experimented with the quantise on different settings to confirm this
Can this also be done on the Toraiz SP 16?
I always have pops and cracks on recorded samples. My biggest gripe with this unit
@@SurfMusicGoodstuff from vinyl? Pops could be clipped audio, turn your gains down a touch maybe? Alternately if ita part of ypur source audio, put it into pro tools or some editing software and tidy it up
What if you are using the RMX1000 send/return ?
@@trpldc99 route it via the djs so mkxer send.. To djs.. Return to input on rmx and retirn to mixer... Or the other way round
Are there STEMS options available for the player without a PC?
@@SwiftSystems1 not for this unit it's more about taking the source audio and usong it in a different manner
@symondodj What do you recommend purchasing an EP or acapella and instrumental tracks?
@@SwiftSystems1 depends on wbat you want to achieve really. I go for music first, things tjen stand out in a track i want to play about with and tjen go about tryong ro sample it. Sometimes irs an easy cut, others... May need a little adjustment. I find the ai tools for track separation are faorly decent for most tracks. Some dont work, but others are perfect.
@@symondodj DJing and Mixtape
Hey can someone help me out I have a 2 T flash drive it's formatted to fat32 l load samples onto it through rekordbox and I'm still not able to see my samples when I load in onto my SDJ 1000 can someone tell me what I'm doing wrong or not doing
You don't need to use rekordbox for samples. Just a simple folder will do the job. Also they need to be 16bit wav files
Im not receiving . Any in audio to my sampler :( anyone help please
Where have you got your input wires connected to?
Are you sampling an Aphrodite track?
No it's an a skillz track... But that said who knows where he sampled it from. I assume it's origonally a 70s funk track