Wow loved the review, i found your chanel a few months ago , i checked your subs and i thought youd have at least tens of thousands , your chanel is awesome you are going to just get more and more subs 🤗
If the Jayco bed is fully accessible without the slide out it would be my choice. I can see where I will need to budget the Weld tech upgrades whatever I buy.
I have that same Freedom Elite 23H and can say that Jeremy is right on about the front cap. The 3-piece cap is pretty much the only thing I don't like about my RV. It's not because I've had problems with it, it's the greater possibility. After 15k miles I'm so ready to upgrade the suspension. I've driven it coast to coast and in my opinion the ride quality is seriously lacking and just downright criminal. The hard part is do I go 4" or 6" lift? 🤔
@@jeremysworld10 I took your advice and went with the 4" Suspension lift with Progressive leaf springs for my Class C. It was installed a few days ago and 600 miles later I am in disbelief. I'm still in shock... THANK YOU FOR MAKING THESE KITS!!! and BIG thanks for recommending Piedmont Performance in North Carolina. Those guys bring honor to your parts! For anybody on the fence about purchasing a Weldtec kit... DO IT! I didn't want to stop driving it when I got home. That was after 600 miles!
@@jeremysworld10 I like how the exterior curbs in to the cab instead of just being flat, something small like this is what I'm looking for, i will definitely be take it to you for suspension work once I get it, I work in the oil fields them haul roads are rough.
Hey bud, love your content and your new channel, been following ya for a while on your previous channel! I have a 2021 Entegra Esteem 32 footer, how much would it cost me to raise it up 6 inches, turn it into a 4x4 and do all the lifting upgrade you offer? Thanks again and keep up the good work! 🫵🏻🍺🇺🇸
You can do a 6" Suspension Package and addition upgrades for the added height; however Weldtec Designs doesn't do 4x4 conversions. For that, you'd want to check out U-Joint Offroad.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
This video is really cool. Great work showcasing both RVs!
Thank you so much!
Wow loved the review, i found your chanel a few months ago , i checked your subs and i thought youd have at least tens of thousands , your chanel is awesome you are going to just get more and more subs 🤗
Woah, thank you so much for your kind words. The goal is only to grow my channel and share the information I have with everyone.
@jeremysworld10 oh I know 👍🤗 but your chanel is gonna explode lol
Can this be done with the Chevy chassis as well
YES IT SURE CAN BE DONE!
im going with the freedom elite ... more partial to stealth mode
That's a good one, stealth mode!
Can I park it downtown LA and live?❤
Great video!!
Thanks a ton!
Where do I find a site on these RV's?
go to the manufacturer site, what are you wanting to know?
I love this Rv !
Nice! when you say "off grid" is the Thor Freedom Elite 4x4?
no this is not 4x4
If the Jayco bed is fully accessible without the slide out it would be my choice. I can see where I will need to budget the Weld tech upgrades whatever I buy.
I can understand, however you can't beat that full wall slide!
I have that same Freedom Elite 23H and can say that Jeremy is right on about the front cap. The 3-piece cap is pretty much the only thing I don't like about my RV. It's not because I've had problems with it, it's the greater possibility. After 15k miles I'm so ready to upgrade the suspension. I've driven it coast to coast and in my opinion the ride quality is seriously lacking and just downright criminal. The hard part is do I go 4" or 6" lift? 🤔
Go with the 4" for the length. It will still fit the 235 tires and ride amazing. That's what I did I my 24b
Okay, I finally just ordered your 4" lift from piedmont performance in NC. @@jeremysworld10
@@jeremysworld10 I took your advice and went with the 4" Suspension lift with Progressive leaf springs for my Class C. It was installed a few days ago and 600 miles later I am in disbelief. I'm still in shock... THANK YOU FOR MAKING THESE KITS!!! and BIG thanks for recommending Piedmont Performance in North Carolina. Those guys bring honor to your parts!
For anybody on the fence about purchasing a Weldtec kit... DO IT! I didn't want to stop driving it when I got home. That was after 600 miles!
In this video I like the Thor, not a fan of the slideout, but for me I’m in between the BT Cruiser 5210 or the Redhawk 22A
Both are really nice, I can see that may be a hard choice. What do you like about the bt?
@@jeremysworld10 I like how the exterior curbs in to the cab instead of just being flat, something small like this is what I'm looking for, i will definitely be take it to you for suspension work once I get it, I work in the oil fields them haul roads are rough.
Nice
Those frameless window really do cut down on airflow. If you install a fantastic fan it really helps and a lot cheaper than replacing windows
Why aren’t they available in diesel?
ONLY ON THE F SERIES CHASSIS
Who did the Offroad 4x4 kit on it?
both are 2WD and the company is WeldTec Designs!
Hmmm…decisions decisions 🤔
There's definitely a lot to consider when choosing between these two RVs. Take your time and let me know which one you'd pick; I really want to know!
Dat dat stupid table😂
Thor is junk
What do you not like about them?
Hey bud, love your content and your new channel, been following ya for a while on your previous channel! I have a 2021 Entegra Esteem 32 footer, how much would it cost me to raise it up 6 inches, turn it into a 4x4 and do all the lifting upgrade you offer? Thanks again and keep up the good work! 🫵🏻🍺🇺🇸
You can do a 6" Suspension Package and addition upgrades for the added height; however Weldtec Designs doesn't do 4x4 conversions. For that, you'd want to check out U-Joint Offroad.
It’s not a GM product. 👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎