How Much Power Does StreetSpeed717's ZR1 Actually Make?
HTML-код
- Опубликовано: 4 окт 2024
- How Much Power Does StreetSpeed717's ZR1 Really Make? After fixing a small oil leak, we beat it up to find out!
The Complete Street Performance RUclips Channel is dedicated to bringing you humorous but quality car content, mostly specializing in late model Domestic V8s. The work we do is with roughly a century of experience between everyone working at CSP, and the best part is we have fun doing this specialized work. Enjoy the Channel!
For The Best Deals, Check Out our Website and Online Store!
www.cspracing....
CHECK US OUT IN OTHER PLACES:
...On Instagram / completestreet
...On Facebook / completestreetperformance
...On the Web cspracing.com/
OUR PLAYLISTS:
Complete Street Shop Series: • Complete Street Perfor...
Andrew's ZL1: • Andrew's ZL1
Andrew's Corvette Corner: • Andrew's Corvette Corner
Kristen's Videos: • The Wife Makes An Appe...
As you know, there is never a reason to take those bolts out from GM. They stay on oil cooler at all times even when removing engines. Only 2 on side of oil pan and 2 small ones. We actually told Mike from the pic he sent us it definitely looked like an oil pan bolt had to be loose or missing.
Thank you for getting Mike taken care of guys! No need to ship back to Texas for quick easy fix. 👊🏻
And Dyno numbers are right on the money, remember we Dyno last on his Carbon Fiber 20s vs the 18 drag radials. 👌
@@LateModelRacecraft good point with the wheels. Drag radials rob a good bit of power on the dyno
👍🏼
Is it tuned to have less tuning and fuel below 4K rpm for drivability?
It's a great build, and I'm glad it was an easy fix. A lot of times on these 1000 horsepower cars when you start dripping oil and coolant it's not so easy lol. I saw someone in the comments had their bolts back out twice - I've never experienced that but perhaps that's what happened as it's been a long road of Mike beating the shit out of it and the zr1 holding up great. Kudos for a sweet build!
From your expression it looks like you was thinking about tuning it...lol
Tricks on you, I'm definately subscribing just cause I'm into this shit.
CLICKBAIT 717 FTW!!! Best comment by a long shot…. I’m now subscribed!
Loved the video! All jokes aside this thing is a beast!
Man y'all's video are always hilarious. Your sub number should be 20x higher
He should do the innerchiller. I would think maybe up 50 hp on all pulls.
Interchiller is what it is called.
Way to put Mike on blast.. you got some $ out of him …:)👍🏽👍🏽
Great Video!
Please do some drag racing with the plaid on the dragway . Thanks
Andrew you should make a deal with Mike that if he can beat your Tesla he gets a free innerchiller.
You mean to say interchiller
@@camirocz Lol I know that's how it's spelled. I just spelled it how Andrew says it.
@@danielfernandes711 Many of you spelled it that way but he clearly says interchiller. Anyway he has a great shop and i love his videos .I live in Montreal but would love to send him a car to modify one day. Really talks sense .
I honestly have no idea how I say it now. But I had to Google it a while ago to find out which is the correct spelling lol
@@completestreetperformance You say it correctly and now you spell it Correctly as well. Lol
Very entertaining boys....
Great job nice video it's lot of power
Very entertaining boys
Andrew I have known you from years ago and I'm sure your well capable of of making that car better than any other shop in America you know your shit! And I'm sure the people you have hired knows well of your standards.
Looks like it's running out of fuel on the top end wich would explain the burned spark plugs.
Time for the interchiller
Remember the Plaid's top speed for now is 163. If you run at Pocono, he'll get you on top end.
They'll probably just start late....just to make it a race.
Love seeing these kind of videos. Doesn't bother me if it's lmr or csp. Both companies seems like genuinely good guys. Hopefully Mike goes for the inter chiller. Cooling systems will add so much horsepower. Crazy to see it go from 970-920. But that opens your eyes I guess. Love the zr1 love lmr s build. And seeing it spank that Tesla plaid was all worth it. Lol JK
Think she would put down better numbers without drag radials. Good vid and like the realness.
You need to take that Xbox to the road course also and let that zr1 hand you your ass, and a top end run also woukd love to see
This is the only csp video we were waiting for
Sounds mean as hell!
Chevy Dude? I mean his C8 was sitting there on video. 🤷😆
Awesome!
Totally fair with LMR,you didnt trash the bolt tq fail,tuning parts seemed questionable.You could have railed and you didnt.Stephen is good but about money.
LMR didnt take those bolts apart
Mike Davenport twin-turbo build is in your Garage
I think it would be awesome to see your shop hook him up with a interchiller.
Nice!
Smells like….. clickbait 😂 ok that was funny
Hopefully LMR watches this video and challenges your plaid to race the LMR Camaro. The LMR Camaro will be your huckleberry.
Come on dude those cars are not even close
@@RustyWells2 atleast you’re realistic lol
I wonder who is getting the C8 build as he's walking past the car in the back ground. lol
INTERCHILLER FTW!
I thought this was going to be a Guitarmagetin story all over again
No nitrous on SS 17's ZR1
What is that in the rear that makes it looks like a mid engine setup ?
Nice😎
Can you do a inner chiller on a procharger ?
@UCXtUDHC2nRPBwq6mRFoJzag is that the $5k to $7k intake setup?
As long as you have an air to water setup the interchiller can be used
Uuuuummmmm....chevy dude, MRS.CHEVY DUDE ?
That's too much C8 for Chevy Dew
Let's go 🔥🔥🔥
Mine came loose two times, I put loctite on the bolts.
I just asked if loctite should be used. I have my answer. Thanks.
Lmr might of dynoed it on a harder tire.. those radials will kill some power as far as dyno numbers go.. toss the other wheels on and it may be the same 1010.. so definitely on par.
Yeah I think we can safely say they didn't fudge any numbers
When will Andrew do an LS swap on the plaid?
Never
@@completestreetperformance Tree hugger !!! ... LOL you can't keep trying to save the planet by driving wifys washing machine. You need smog, raw fuel and flames out the exhausts and more calamity than a jet at full noise.
Traction control strategy by limiting torque? Strange....
Edit - That popcorn tune doesn't help with generating excessive heat either.
When mike raced he kept getting fast when he raced actually as well dunk is different than air air
Your channel should continue to grow especially since RPMs channel went to shit 😳
hell yeah did.. cant even watch them
that was his problem ! Mike didnt let CSP build the CAR !
It would have blown up if he did
Lol this was funny
I had to do a double take before clicking on the video. For a second I thought it might be one of those dramatic titles that don't match the picture traps. What do they call them??? Oh pretty sure it sounds like JAILBAIT ........ sorry now I remember CLICKBAIT (717 times)
You can do this machine so.much better love your emotions lol
I literally just said that today.
Im a little biased on this lol
Smells like clickbait had me laughing at that one.
I saw SS717 at Carlisle and I smelled the same smell... I get a laugh from Andrew with all his videos. Always fun to watch.
Same lol
Mike better get this shit str8 b4 this race cause the hulk is gonna eat it up as much as I love the zr1
The Hulk passed away from what I hear
Sadly that's what it seems like after their second run hulk was on a tow truck
All I got from this is LMR’s hp claims are inflated 😂.
I don't think so. I think they are roughly right on the money as Mike's car made within 20 HP of their claims with drag radials on, instead of the wheels they dynoed with
"OoOh Ha Ha"
MAKE SURE YOU CHARGE CHEVY DUDE MARKET PRICE FOR HIS BUILT ON HIS C8 CUZ THAT IS INFLATION OR TELL HIM TO SELL IT TO CORVETTE WORLD 😂😂
Damn got that 4 digit whp card yanked on a RUclips 😬
Wrong
Dynos are tuning tools and all different based on age , calibration and use. You can have two dyno jets read 100-200 whp different from each other I’ve seen it in person plenty of times. Trap speed and how it runs is all that matters.
“Clickbait717” lol unsubbed a long time ago because of that
May want to invest in a weed eater.
You guys are so cute
That burble tune is stupid
I agree
Clickbait717 😂
Different day (weather) ,different dyno, different numbers ..duh
Different tires as well
This is CSP trying to make LMR look bad it's so very obvious guys that's not cool
No, I don't think LMR looks bad. I thought the opposite as it delivered numbers as they advertised
It’s not a good look. But the a/f ratios being off is not good.
@@300zxdriver I was told it was a limitation of time for making it for one of Mike's events. It will be corrected. Sometimes we have to balance when it comes to events what can be accomplished on time vs what is ideal.
Damn right click bate !! Take car of her ..as i already know you did 👍
Clickbait 717...HAHAHAHAHA!
always use sae on the dyno, std is a joke
Doesn't matter how many hp thay make once the come across a Tesla plaid or raven. Corvette gets gap / Rape 😎🖕🖕
ok dont get ahead of yourself.... he beat you more than you beat him... lol
No he didn't lol... And he even said he didn't in his own video. Lol
@@completestreetperformance alright fine. didnt want to admit it.... just let me be right this time.. your car is consistent and will always win in that matter. BUT when its a good hit on both cars, you aint winnin'!
This is insanely lean…maybe I should abort the run…
…
…
the decel popcorn tune is terrible.
Sure hope you cleaned all the shavings out of the cooler off a blowed up engine 🤦♀️
We just used the bolt...
Get rid of that stupid burble tune
If I was LMR I would be pissed The way you bad mouth them. Throwing shade on their build
He’s just calling it like it is lol can’t be mad at that
LMR built a beast, and just like all things by humans we can make mistakes. Guaranteed they would have taken care of him which is the only thing you can do. I joke about it not being done by us, but I don't think it's a bad build at all.