Wow, Botajell that’s a very great tips about the clutch pad to heat up and to do it yourself good points and ideas 💡 grand master flash, braaaaaazzzzzzppppp. Nice torch I have a Baja body for you which I don’t need ..... I would like to give it to you
Wow bro that’s fucking awesome! Thank you so much for sharing your knowledge and tricks to all of us 🙏🏽. Also thank you for taking the time to go that extra mile to show us the steps you take. Really appreciate it brother keep up the great videos 🤙🏽
Wow the amount of oil that came out of those clutch shoes was incredible and to think I was just gonna throw my clutch in stock You saved me a hassle on that one for sureThank you my good sir
John.....thanks for showing the clutch spring install. Ill be taking mine apart again. I also have a.new UFC metal clutch. Gonna heat the oil out of it. Glad you made this video. I didnt know about all that damn oil in the metal clutches. Thanks brother!!!
@@BOTAJELL John, thanks man. I just did the "burning of the oil" on my UFC clutch. All I can say is WOW! I never knew about that. So much oil came out of it. So glad you posted that tip. Noone posts the kind of info you give. Thanks again John.
GREAT VIDEO...! Was wondering if you could i would really appreciate and I know others would to.....Make a List of ALL Torq settings for a 2 stroke motor? Thanks alot have been watching you for years...
Awesome 😎 video bro! Thanks for sharing the oil situation on the FS clutch. Most people don’t share tips like that!!... safe for being 1/5 scale yoda! Any ?...👍👊⛽️🧨💨
I always torque things but sometimes when I’m away or have no torque wrench I will do it by hand . Just use common sense. Don’t over tight things especially small bolts and when the engine is hot ! I have seen many newbies strip spark plug holes and intake bolts many times .
Yo what’s up Botagell been watching you for years man and leaned a lot. You inspired me to build the Losi 8T 4.0 and many more builds. Now I just need to know where I can purchase one of those beautiful engines I’ve been looking everywhere Please let me know Much Respect. Dee from MD
Nice motor, it’s looking awesome. I’m planning to get into 5th scale, I’m stuck between the DBXL and the 5ive t, which would you say is better, I’m thinking the dbxl is not as good because of how they were able to lower the price that much
Your making that look easy! Over question though, I use and have used for years that plug stopper.i have used an endoscope to check my piston and I'm not noticing any marks. Do you not use them because of the marking? I already know and really like that tool you have... Will be looking for one myself! That ride is going to be sweet! You seriously have some if the best builds I've seen!
Thank you for the kind words 🤝💥👊💥I also used to use the piston stop tool all the time with stock engines but not a good idea to use on modified engines especially with domed pistons and definitely not on angled pluged heads . There’s no need to use them now especially with all the great tools like the Bartolone flywheel tool that’s out for us to use . I had many newbies and even guys that’s been in the hobby for a few years that have cracked there pistons because they used the piston stop tool when they were tightening up there clutches and flywheels
Because once it's run in the plug usually doesn't last too much longer and also your motor won't run as well once the plug starts loosing it's spark always put a new plug in after break in 👍👍👍
Engine feels snappier and also seems to make more power on the top end aswell . All of us in our drag race team uses these glory hole 🕳 Bartolone stacks because it’s what makes the best times at the tree . We test a lot on the weekends so when race day comes we are prepared to kick ass.
@@Mrlaudy1 its not a torq wrench MIP specially make 4, 5 , and 6 mm hex wrenches for a handfull of people who build engines and other things for the RC hobby
only thing I hate is that rcmax makes coil so hard to put MSD wire an isn't like bartolone engine where that shit just twist off cause one I got would of looked sick on engine
I love watching you build stuff I can’t wait to see this come to life
Wow, Botajell that’s a very great tips about the clutch pad to heat up and to do it yourself good points and ideas 💡 grand master flash, braaaaaazzzzzzppppp. Nice torch
I have a Baja body for you which I don’t need ..... I would like to give it to you
Wow bro that’s fucking awesome! Thank you so much for sharing your knowledge and tricks to all of us 🙏🏽. Also thank you for taking the time to go that extra mile to show us the steps you take. Really appreciate it brother keep up the great videos 🤙🏽
Your the best I have learnt so much from you over the years
Wow the amount of oil that came out of those clutch shoes was incredible and to think I was just gonna throw my clutch in stock You saved me a hassle on that one for sureThank you my good sir
John.....thanks for showing the clutch spring install. Ill be taking mine apart again. I also have a.new UFC metal clutch. Gonna heat the oil out of it. Glad you made this video. I didnt know about all that damn oil in the metal clutches. Thanks brother!!!
🤝💥👊💥Anytime bro especially you NO ?’s
@@BOTAJELL John, thanks man. I just did the "burning of the oil" on my UFC clutch. All I can say is WOW! I never knew about that. So much oil came out of it. So glad you posted that tip. Noone posts the kind of info you give. Thanks again John.
Hell ya Jhon another good video keep it up, love the information will be doing all that work to my 5ive-T 36cc rovan engine clutch soon 👍 👏
I never thought that clutch shoes have that much oil in them. This is a great idea pre heating them
Great info on that clutch ⚙️👍🏼 Awesome video 🥩🥃🔧🔥👊🏼 Lookin good !
john you can also cut the plastic on the chock in half ,don't have to grain it off
that is amazing the oil coming out
GREAT VIDEO...! Was wondering if you could i would really appreciate and I know others would to.....Make a List of ALL Torq settings for a 2 stroke motor? Thanks alot have been watching you for years...
Thank you for the kind words I appreciate that brotha 🤝💥👊💥. I will try to remember
Top Botajell ! Very good !
great video do u know when rovan get the red cnc clutch
Awesome 😎 video bro! Thanks for sharing the oil situation on the FS clutch. Most people don’t share tips like that!!... safe for being 1/5 scale yoda! Any ?...👍👊⛽️🧨💨
Very nice Bro
Hi guys has anyone gone to the Rovan RC site lately. It looks like it's been shut down ?
No it did not you must be somewhere else ? This is the one www.rovanrc.com/
@@BOTAJELL that's ok I found out what's the problem. a virus on my phone I deleted all the history searchings
Awesome bro
Another dope video! But we need you to come back to nitro!! All these new nitro youtubers are acting like children, the nitro king is missed!
Hi man very good video! I have a question for ya do you need to torque stuff like that or can you get away with doing it by hand?
I always torque things but sometimes when I’m away or have no torque wrench I will do it by hand . Just use common sense. Don’t over tight things especially small bolts and when the engine is hot ! I have seen many newbies strip spark plug holes and intake bolts many times .
Yo what’s up Botagell been watching you for years man and leaned a lot. You inspired me to build the Losi 8T 4.0 and many more builds. Now I just need to know where I can purchase one of those beautiful engines I’ve been looking everywhere Please let me know Much Respect. Dee from MD
What engine? Nitro or Gas ?
Sorry about that i was referring to the New Brovan 45cc engine.
all steel clutch, are these better than regular asbesto clutches
Many of us love them and only prefer the FS clutch but I switch things up from time to time that’s why I have many different types of clutches
Nice motor, it’s looking awesome. I’m planning to get into 5th scale, I’m stuck between the DBXL and the 5ive t, which would you say is better, I’m thinking the dbxl is not as good because of how they were able to lower the price that much
I like them both , but I prefer the MTXL over the DBXL NO ?’s but 5T all day !!! Stronger diffs and more parts for it 🤝💥👊🔥
Your making that look easy! Over question though, I use and have used for years that plug stopper.i have used an endoscope to check my piston and I'm not noticing any marks. Do you not use them because of the marking? I already know and really like that tool you have... Will be looking for one myself! That ride is going to be sweet! You seriously have some if the best builds I've seen!
Thank you for the kind words 🤝💥👊💥I also used to use the piston stop tool all the time with stock engines but not a good idea to use on modified engines especially with domed pistons and definitely not on angled pluged heads . There’s no need to use them now especially with all the great tools like the Bartolone flywheel tool that’s out for us to use . I had many newbies and even guys that’s been in the hobby for a few years that have cracked there pistons because they used the piston stop tool when they were tightening up there clutches and flywheels
@@BOTAJELL I don't have anything that nice...didn't really consider the domed piston. I thought it was just the angled plug.
Hi what's the name of that flywheel and pull start setup. Looks beefy..
OREOS AWESOME BUDDY SEEMS LIKE NOTHING BOTHERS HIM BE SAFE BUDDY
We all love him a lot he’s awesome but he really hates other dogs so we can’t have him next to others and he can not stand the mailman not gonna lie
@@BOTAJELL I like Oreo too! I have assembled my Baja 5b clutch shoes before but never heated them up. Keep on showing us all of your tricks!
What kind of torq wrench is that Botajell?
Why should you replace the spark plug after break in?
Because once it's run in the plug usually doesn't last too much longer and also your motor won't run as well once the plug starts loosing it's spark always put a new plug in after break in 👍👍👍
What kinda power difference do you notice with these velocity stacks?
Engine feels snappier and also seems to make more power on the top end aswell . All of us in our drag race team uses these glory hole 🕳 Bartolone stacks because it’s what makes the best times at the tree . We test a lot on the weekends so when race day comes we are prepared to kick ass.
Hi John when will this engine be available to the public?
Should be at www.rovanrc.com/ on Tuesday or Wednesday?
Awesome thanks bro. Been checking since your vid where you called Bartolone with the primal owners.
4,5,6mm from mip please
What kind of torq wrench is that?
@@Mrlaudy1 its not a torq wrench MIP specially make 4, 5 , and 6 mm hex wrenches for a handfull of people who build engines and other things for the RC hobby
Where do i get one of those motors 45 reed
Next week at www.rovanrc.com/ 🤝💥👊🔥🔥💨💨💨
👍
only thing I hate is that rcmax makes coil so hard to put MSD wire an isn't like bartolone engine where that shit just twist off cause one I got would of looked sick on engine
30:02 hahahahahaaaa
I’m so early there are 0 views.
😉
👏💥🤝💥🥇🏆💥My Brapp Brother Steve in the House ANY ?’s
@@rcOhio sup Todd 🤝💥👍💥🔥💨💨
Hello friend ! rofun 45cc bigbore52cc moding! Photos on facebook! Gábor Szabó
Lmao😅😢 right next to a wD40 can