How To Build a Wood Gate That Will NOT SAG!
HTML-код
- Опубликовано: 6 июн 2024
- Build a large Custom Wood Gate That Will Not Sag! No cables or wheels needed!
In this video you will learn how to build a gate that will NOT sag. This procedure can be used for building sag free gates for fencing, doors for sheds and barns or wood windows for sheds and barns. If you follow this technique for virtually any hinged gate, door or window you will enjoy decades of sag free service. You will not need to support this gate design with a wheel or cable.
I built two 9' gates for this project and four Crossbuck windows for my barn and fence.
*If this video was a help to you give it a "thumbs up". If you have not already done so, please consider subscribing to this channel.
Disclaimer:
Although I have been following these procedures for many years; I assume no liability for any damage that may occur to any person or property as a result of the information provided in this video. I take necessary precautions (that I am aware of) when working on these projects but that in no way implies or creates any expressed or implied warranty or guarantee of any kind of particular result. Any injury, damage or loss of any kind to anyone or their property or anything related to information in this video is the sole responsibility of the user and not Helping U Online (this video). 
Хобби
![Rich Dunk (Ft. DaBaby) - BIG DAWG [Official Video]](http://i.ytimg.com/vi/Pz2ewsSKAEM/mqdefault.jpg)
Great design, just what I was looking for!
Sweet,..gates are the focal point of any job,..well done! Thanks for the video
You are a skilful and accurate woodworker! Thank you for this video.
Thanks
Hey, nice job. well done.
By the way, I like that Yamaha G1 in the background. Awesome little beasts. Mine is a 1984 and runs like a champ.
Love the music too.
Awesome fence mate just built this today for my garden !
Great to hear!
I've used youtube many times for self help stuff. This is the video I needed and the best self help yet. I am going to build my gate exactly as per this, minus the wire. Thank you sir - and the music soundtrack was pretty good too, bit of The King and Neil Diamond, good job. I have liked and subscribed. There will now be a gate in Australia made to your design.
Glad it was helpful…And hope your project goes smooth and well
Awesome. I’m learning
Keep it up
Well Done!
Thanks … The gates are just like new and holding up well other than needing a little touch up stain from the animals
Beautiful ❤️
Thank you! 😊
That is amazing work. As to add extra strength to make them stronger as you suggested - where in the middle should add the board, if don't mind me asking? Your response would be greatly appreciated.
This gate is still as strong as the day I built it. It doesn't need more support but if you liked a different look you could add a vertical board in the middle and that would also add support... or another horizontal board in the middle would do the same.
Love the detailed vid. Did you do a video on building the shed as well?
I did not do a detailed video on the barn / shed building. I do have a number of pictures and some video. I will look at what I have and may do a video on the entire project?.
Sounds good. Looks very well built. Thanks
Beautiful job! I’m considering a similar build and worried about sag and the hinges. Can you provide the link to the hinges you used again? Thanks.
I wanted to save money & get a hinge that would support the load of these heavy gates. I found these 8" galvanized T hinges at Harbor Freight for around $3 each. www.harborfreight.com
I painted them black and they are still working great after 3 years with not any sagging at all. I use them every day to let the animals out.
I will have a video out on December 7, 2021 showing how I painted those hinges to not peal or flake. They are also in great condition... like the day I painted them outside of being a bit dusty and dirty.
What a great tutorial! Are the deck boards you used 6" (5/4" x 6")? Thanks!
Yes standard 5/4” x 6” treated deck boards… Used… And they actually measure 1” x 5 1/2”
Nicely done. Is the wire mesh part of the gate's structural integrity, or is that simply to impede animals?
The wire mesh may add a little structural integrity but not necessary. I only did it for animal security.
I have a question about the gate. I built one using your tips and no the gate has twisted a bit. I’ve put some tension wires on it to try and straighten it out. Didn’t work all that well. Do you have any tips on how to straighten it better ?
Did you use "wet" treated boards from a HD or Lowes to build your gate?... Sometimes their boards are a lesser quality and if not KDAT (kiln dried after treatment) they will do a lot of crazy things as they dry. As I stated in my video I built my gates with used deck boards (the wood was dry) and they have not moved even a 1/4 inch in the last 2+ years.
What I would do...
If this is the reason for your twisting boards... I would keep the gate latched (top and bottom) at all time while the wood dries. Also make sure to get it sealed (stained)
Great video but if you are doing this for the first time remember that the hinge post can and will bend. Make sure you are using a 6x6 not 4x4 and its buried beneath the frost line. Very important..
If vertical boards are used? Will the added weight be a concern?
A gate built like that would not budge but make sure you have hinges to carry the weight depending upon how long you make The gate
Where is the link to the gate
Good work. But I’m
Surprised at how small those hinges are to hold up a large gate like that.
I have been very pleased with these hinges. They were very inexpensive and to date (almost 3 years) they are still working like new.
What size T hinges did you use? 6,8,10?
8 inch that I bought at Harbor freight. I did this project about three years ago and at that time the hinges were a little over three dollars apiece. Everything still holding up perfect!
There is a link at the end of the video that you watched that show installing the hinges and explaining the process.
Those gates are always not sagging when closing.
I am not sure what you mean?... but these gates (and windows) I built about a year ago have not budged even a fraction of an inch when closed, opened or anywhere in between. They are rock solid!
Thanks for following.
Quality craftsmanship.
Why must everything be in imperial, have you ever heard of the metric system?