YD25 EGR Delete Nissan Navara D40,D22,R51
HTML-код
- Опубликовано: 18 янв 2022
- In this video, we're installing an EGR delete pipe kit. The pipes are common to break on the d40 Navara and cost over $1000 from nissan. Deleting the EGR helps with the power, fuel economy, and life of the engine.
Parts fitted
yd25.com.au/index.php/yd25-s-e... 
Игры
Well done on a No BS clip and well explained process. Thanks.
Wish all videos were like this. Thank you
Completed this today, if your willing to cut the egr pipe with a reciprocating saw there is no need to remove fan and shroud .
I don’t normally comment on videos but dude you made it so easy to understand and used the less is more approach bloody well done legend !!!!
Clear and pleasant explanation. Can you also make a video about DPF delete. Thank you in advance.
Very helpful, any ideas where I could get that kit in Ireland or Uk? Cant find it on ebay
So if I haven't got a blocking plate and not oil is thick as is this from blockage from EGR and how much is kit and were to buy from
I put in a blanking plate before the manifold where egr out is connected to manifold.
But i forgot engine check light and error code.
Nisaan xtrail T30 2.2dci .
Can you tell the reason? I didn't stop the egr solenoid. Still how did ecm know that exhaust is not entering manifold. Although solenoid is working normally and seeing exhaust
Do you have a vid for the 140kw engine?
Best place to source parts in Australia 🇦🇺
Working on my d40, r51 p/f.
Theres a blank plant installed on the left side (fuel rail side), nothing on the exhaust side, and both pipes still connected ?
I've had it since 30000kms, why you reckon thatz been done ?
It's not a stainless blank either.
The motor has only just been pulled apart to do the head after overheating from the plastic hose connector breaking in the firewall. So i didnt do it, and dunno who did ? 2009 model i bought in 2010.
what size of hose that you use look like U shape
good tutorial but can i just say those welds on the egr pipe are probably amongst some of the worst i think ive ever seen legit bird shit and they still couldnt patch it
Thanks for the very nice explanation. I agree about EGR sistem on YD25 engine of the Nissan Frontier is big problem. I have in Brazil a Nissan Frontier SL 2016 190 HP, very, very nice pick-up truck. Do you still have the Nissan Frontier?
Please, where are you from?
Nice your vídeo. Sorry about my english. Thanks for that!!
Ok where can you buy this kit?
Any advice on best places to source R51 parts?
2006 pathfinder Spanish built.
Cheers
Great content.
Keep up the great work.
What parts are you looking for?
@@yd2532 part number 38220
Cheers
@@77FINNBEAR whats the actual part I don't know what that part number is.
Gday, Great video.
Im having issues with my 2010 d40 EGR.
Where can i get the plates and hose from?
Cheers.
Is it Thai or Spain built
Greetings from Chile, how many liters of oil does the YD25 engine use? I need to change it and the manual doesn't say anything about it.
Around 7L I think
hi, I'm sorry I'm not english and I didn't understand something, what did you said at 1:51 about the threads?
Put anti seize on studs before putting bolts
The old screw in the battery terminal trick
Hey man, Great vids
Does this kit bring up any engine lights (d22 yd25?)
No codes. Only time they will throw a code is if there is an issue with the egr valve
@@yd2532 Thank you my man beauty
This been done on my bro jeep after a few months it's throwing up codes and flashing engine light
Did you need to install a resistor onto the White Wire on the MAF Sensor?
No
You dont need any type of tune for the air intake or turbo after doing this?
No
Hi mate I have yd25 and it’s different setup as in the rubber hoses so wats the go there when I purchase ur kit
You might have a 2009 model. If it's a 2009 you will need to use a peice of straight hose instead of the U hose
Yep spot on thx mate I’ll order ur delete kit now
Hey brother
I have a 2014 d40 my fan belt always squeaks.
Do you have any tips?
Good afternoon could you please send me the link to buy as a kit or where you got the 3 plates from?
Thank you
Do you have a link to your parts website at all
www.yd25.com.au/index.php/yd25-s-engineered-products/yd25-s-engineered-products-4/egr-delete-pipe-kit
Does it cause the any trouble codes or engine light to come on?
Did you find out if causes any trouble codes or engine light 💡?
Cheers
Looking at doing the same.
@@77FINNBEAR no response, sorry mate
You didn’t show though where those 2 water pipes go once you’ve removed the metal coolant section - what do they plug back into ?
You loop them with the rubber U hose
You just join them together.
Join it with the u hose.
Hi, So i have the nissan navara d40 2012 thai model and have been experiencing issues with my turbo for years only to realise that my Nissan has no egr system . The blanking plate near the turbo intake is there, I have no egr valve and there is no egr tube. How on earth is this possible? I thought the performance was due to the turbo so I replaced the turbo with the exact one according to my model. Can you advise? can I get the performance of the turbo in the absence of the turbo?
Boost control solenoid or vacuum lines going to the solinoid
@@yd2532 thanks. I changed it a couple months back with a non genuine so hopefully that's the cause. I've also ordered a turbo hose kit. Will order a genuine solenoid and try again
Hi mate, good video just wondering do you have do anything with the ECU or any other tuning etc to ensure she runs ok? Thanks 👍
Nah the only time they throw a code is when there is an issue with the EGR valve
@@yd2532 which can then have issues because it’s not working as it should due to the pipe being removed ... kind of the chicken and the egg isn’t it ?
@@4WheelingInNSW the EGR valve gets jammed and breaks when the soot build up from the EGR not being blanked when this happens you will get a code.
@@yd2532 I just had my Egr replaced hence now my turbo is playing up.
Do you know what this could possibly be?
Cheers 🍻
Erg valve.
Is software a necessity with this or can you run without software?
No software needed
@@yd2532 Thank you, mine was done by a mechanic (disabling solenoid spring). So i was concerned regarding high engine temps due to better combustion and different air/fuel ratios etc. But there are alot of opinions out there regarding the efficacy vs downsides
@@willie1220 Hey Willie, have you noticed better fuel mileage and does your engine run hotter, or is it just fine. thanks
@@brett9860 no noticeable difference. But after further investigation it's definitely healthier for the engine and especially intake manifold carbon buildup
The egr in the 140kw models is alot easier to get to i didnt have to take shit off compared to this.
Is it beneficial to remove egr what's the main reason?
@@kodigoodman6417 Dont have to remove the egr pipe completely if you're worried about getting defected.
Use a backing plate like i did.
The benefit from deleting/blocking the egr is no soot particles mixing with the blowbuy creating sludge that blocks your intake manifold and engine air passages.
Recommend to get a catch can first (basically fixes blowbuy with a provent 200), then if you want to block the egr thats on you but definitely recommended if your vehicle can take it.
Is this legal in Australia??
It's for off-road use only 😉
No, totally illegal
No mate, highly illegal and when ( not if ) you are caught, H U G E fines apply for tampering with emission control on any vehicle 😉👍
@@4WheelingInNSW our idiot Police wouldn't be able to tell! they don't know the front from the rear of a car!
@@4WheelingInNSW this country sucks.
I tried to enter the site from Mexico and I'm blocked
We can't ship the parts international. Navlife sells our EGR kits as well and should be able to ship it to you
But why didnt he drop. Maybe staged??
What this video doesn’t tell you that in Australia it’s around $11000 for temporary with the vehicle emission system. $1000 part from Nissan sounds a lot cheaper.
Wait what?
Did you mean, it's an 11 grand fine for tampering with the emission system?
You know installing a catch can is technically tampering with the emission system.
I've never heard of absolutely anyone getting a fine for that.
Do you mean TAMPERING? Probably 100,000+ EGR deletes have been done over the years. I'd love to see even ONE fine issued.
That great but you left the engine with open manifold where the EGR was connected to the manifold. The final stage is to get modified manifold without the inlet for EGR.
He put a plate in there how is it still open
Can you not just remove the entire thing instead and block that off? Cause there's no point in having the egr valve body there is there if it's just getting blocked off?
If the EGR valave is not connected it'll throw a code
Kit delete oil cooler engine yd25 exist
Yes there several ways to do it.You can create total separate air cooled one or separate water cooled one not attached to the block or have air cooled coiled aluminium pipe