It’s like a cutdown version of the TIE Reaper. When you see this ship up close, you can almost see that this was the most likely evolution of dropships in the Empire.
In one of your Yavin IV vlogs you mentioned releasing in the future building instructions for all the "rebel base equipment", (computer terminals, cargo containers, maintenance craft, etc). Just wanted to say, some of us our still hoping to see it and an imperial variant someday! Cheers!
Rebel base equipment would probably be pretty much identical to Imperial stuff. It isn't like the Empire would restrict the posssession of their forklifts lol
I just finished this build and it is quite excellent. The cockpit needed a little customization to clear the view of the windscreen for the pilot and it needed a proper piloting control console rather than the suggested trans-red cheese slopes.
@@brandonnn9543 - That's hard to say. I sourced all the bricks from a "Bricks & Minifigs" bulk table. I'm typically hunting for bricks for multiple MOCs at one time. So, stretched over time with each 1 gallon bag holding about 1000 parts and running about $20 each, and this MOC having 2400 parts... I'd say it cost around $50 - $60.
Disney really likes d-day transport huh looks like the flying block in the first order. But tbh this was done soo much better! And this moc is very awesome as well!
Review after purchasing and building: One of the most ingenious model design I’ve seen utilizing SNOT, and does look sleek. However one of the most flimsiest builds I’ve ever seen or purchased off of brick vault. Very complicated build so instructions can’t communicate how to fine tweak fits of non-clicking or snapping “connections” or more aptly put: “fits”-the top portions just kind of rest on top. While SEMI-sturdy; It’s a type of build that sits on a shelf never to be touched lest things fall apart very quickly…or glue them. Especially the ramp area. The ramp has no brake whatsoever and the walls of the ramp area are a lot of 1x1 plate SNOTed pieces so the structure bends and is held solely on modified 1x1 bricks with side studs. Those pieces constantly disconnect with any drastic movement. Overall I’m happy because it’s gonna sit on a shelf. Like I said it’s a mounting build with some interesting but “illegal” builds and definitely not a “swooping” or “playing model”
We really need a minifig scale slave 1, not to be to prideful but I feel like the only one who's done this, and I know others can do it so much better so let's go!😃
@@son-of-Mandalore It's next to impossible to get all the internals of the slave 1. If you look at the starwars cross-section book you see the ship is almost entirely hollow without any real sort of support structure. Even with advanced MOC's like these you still need a large support structure.
I literally said, outloud, while watching the episode live after it aired: I cannot wait until brickvault makes a design of this. Might be the first MOC I buy from you guys.
I don't know why but I feel guilty that I like this ship so much, cause it's so boring. But I just love boxy spaceships. Watching the video, I think I'm gonna get it but figure out if I can add a paint job as if someone bought one at an imperial auction and customized it.
Would be awesome to see you guys make the nu-class attack shuttle, either a republic one from the clone wars or the newer imperial version with the fin across the hull from the bad batch
Is there any chance you could maybe start including the piece count/cost of the individual mocs you guys make? I know some designers may not like to share that stuff and also I do know you guys have them on your website, but I think it would benefit some people by addressing how much and how many parts are in the moc!!
nice model I just built a load of yours recently including the at-te, 3 at-rt's, dwarf spider droid, droideka, at-st and the ATT all been brilliant builds and look great would love to see a clone turbo tank or better known as the HAVa6 juggernaut at minifig scale that would be awesome.
not sure if this is accurate, i haven't had the privilege to see The Mandalorian (15 and big time broke,) but maybe for the pilot you could use one of the pilots from the cargo tank thing (i forget the name of it,) like i said, not sure if this is accurate or not.
Is it just me or does anyone also think this transport seems to be slightly smaller than it should be? From the show this transport doesn't seem to be that much smaller than the Razor Crest.
Depends on the scale you're going for. Figs are much wider than people so conserving the width with beimportant. slightly staggering the seats might help you in that regard.
Fun fact: you can recreate this with 358 LEGO fire pieces and a jetpack launched missile
And maybe some rocks to “land” it on
And one Chad boba
Or if you want a quick makeshift one just get a bunch of base plates and stable them otherwise it will fall apart easily
Ohhhh good idea I’ll try it now
Maybe that should be a ucs set!
This really goes well with the new mortar trooper
Can't wait to get a couple :)
Ooooo this really cool still waiting on that MTT but dude this is so cool
The MTT would be so cool!
I know
A First Order Troop Transport would be awesome!
It’s like a cutdown version of the TIE Reaper. When you see this ship up close, you can almost see that this was the most likely evolution of dropships in the Empire.
For me it looks a lot like an early version of the First Order Troop Transport.
@@RamielDerLinke Precisely! Reaper, this transport, then the FO transport. Evolution
This is one of the most stunning and impressive builds I’ve ever seen.
Really great build with awesome techniques that make look very accurate and smooth.
Idea: clone turbo tank
8thbrotherbrick really knows what he's doing with LEGO :) The Turbo Tank has been so high on the list for so long! Hopefully one day it'll happen.
In one of your Yavin IV vlogs you mentioned releasing in the future building instructions for all the "rebel base equipment", (computer terminals, cargo containers, maintenance craft, etc). Just wanted to say, some of us our still hoping to see it and an imperial variant someday! Cheers!
Rebel base equipment would probably be pretty much identical to Imperial stuff. It isn't like the Empire would restrict the posssession of their forklifts lol
This transporter design is better design comparing to the First Order one, which has a weird vulnerable wart-looking pilot/driver placement lol
Agreed
Yeah, I think the First Order one especially was designed to basically be a "Higgins' Space-Boat" lol.
The whole point is that this is showing the transition to the First Order.
Just think how much lego would charge for this set based on piece count alone, if they ever hypothetically released this set.
I love how smooth this looks, it makes it look so much bigger for some reason
A Tie Reaper would be awesome !
I liked the little first order on it
This build reminds me a lot to jeracs razor crest
I just finished this build and it is quite excellent. The cockpit needed a little customization to clear the view of the windscreen for the pilot and it needed a proper piloting control console rather than the suggested trans-red cheese slopes.
How much did it cost you?
@@brandonnn9543 - That's hard to say. I sourced all the bricks from a "Bricks & Minifigs" bulk table. I'm typically hunting for bricks for multiple MOCs at one time. So, stretched over time with each 1 gallon bag holding about 1000 parts and running about $20 each, and this MOC having 2400 parts... I'd say it cost around $50 - $60.
insanely cool
10/10
Daaamn that's a smooth build
Thanks B.V. It looks so smooth. I like it. Well done.🤠
I will buy it but I plan to buy some pieces in a different color for a custom casual transport. I'll go ahead and add some Furniture. Amazing Build
Ooh like a housebus? That would be cool,
Would love to see a more weathered version come out to make the build more interesting to look at
Wouldn't be hard to swap in some brown or green for dirt/rust and other weathering.
Couldn't BELIEVE this was lwgo at first glance. So detailed aswell as that color pallete 👌
Disney really likes d-day transport huh looks like the flying block in the first order. But tbh this was done soo much better! And this moc is very awesome as well!
This is a really fantastic build! The fact its stable enough to swoosh around & the amount of figs you could put in is just great, awesome job!
I would love to see the first order version of this transport. Also the Star Tours Starspeeder 3000/1000 from Disney parks.
Review after purchasing and building:
One of the most ingenious model design I’ve seen utilizing SNOT, and does look sleek.
However one of the most flimsiest builds I’ve ever seen or purchased off of brick vault. Very complicated build so instructions can’t communicate how to fine tweak fits of non-clicking or snapping “connections” or more aptly put: “fits”-the top portions just kind of rest on top.
While SEMI-sturdy; It’s a type of build that sits on a shelf never to be touched lest things fall apart very quickly…or glue them. Especially the ramp area. The ramp has no brake whatsoever and the walls of the ramp area are a lot of 1x1 plate SNOTed pieces so the structure bends and is held solely on modified 1x1 bricks with side studs. Those pieces constantly disconnect with any drastic movement.
Overall I’m happy because it’s gonna sit on a shelf. Like I said it’s a mounting build with some interesting but “illegal” builds and definitely not a “swooping” or “playing model”
Awesome, would love to see a bad batch shuttle in the future
This is awesome!
We really need a minifig scale slave 1, not to be to prideful but I feel like the only one who's done this, and I know others can do it so much better so let's go!😃
The UCS one was basically mini-fig scale
@@JM64 actually it wasn't, and it doesn't have all the internals, only a cockpit, sad reality of most of Lego's work
@@son-of-Mandalore It's next to impossible to get all the internals of the slave 1.
If you look at the starwars cross-section book you see the ship is almost entirely hollow without any real sort of support structure.
Even with advanced MOC's like these you still need a large support structure.
I literally said, outloud, while watching the episode live after it aired: I cannot wait until brickvault makes a design of this.
Might be the first MOC I buy from you guys.
I don't know why but I feel guilty that I like this ship so much, cause it's so boring. But I just love boxy spaceships.
Watching the video, I think I'm gonna get it but figure out if I can add a paint job as if someone bought one at an imperial auction and customized it.
Would be awesome to see you guys make the nu-class attack shuttle, either a republic one from the clone wars or the newer imperial version with the fin across the hull from the bad batch
Daaaaamn it's so smooth
Wow that looks cleannn
been wanting to see this for a while, now it's here
"I was aiming for the other one."
You guys need to make a mini figure scale AT-OT
Looks like the first order transport but I think it looks a little bit more a Star Wars design
Just what I've been waiting for
This is great!
Looks amazing!
Cool looking but I’m not paying 300-400 bucks for for it
Can we get more comparisons with the razor crest
Dang this looks so sleek and angular, I would love to see an at-ot next I love the one from Mr. Idler
I want this to be a real Lego set
Looks Awzum! 😎
I would like to see a Mandalorian Kom'rk-class fighter in minifigscale
When u buy the republic gunship and they make a better more accurate version a couple months later😐
F in chats bois
F
Ehh I thought the same 😢
They don't make models, they just sell them
They do a little trolling
So unreal
The cannons are elegant
Amazing one! Was waiting for this one to come up sometime :)
Maybe a follow-up with the First Order transport.
New moc yeeeeee
Legends referenced a imperial troop transport that's never seen in the movies or in modern canon.
love this!
HohH! It's beautiful! Thanks again for another great video.
I think an ocupara tri droid in both sizes would be really cool to see in minifig scale
Is there any chance you could maybe start including the piece count/cost of the individual mocs you guys make? I know some designers may not like to share that stuff and also I do know you guys have them on your website, but I think it would benefit some people by addressing how much and how many parts are in the moc!!
They have piece count and price in their webshop
We need moc designs for star wars creature (nexu, varactyl, reek, Ackley, bantha, etc.)!
nice model I just built a load of yours recently including the at-te, 3 at-rt's, dwarf spider droid, droideka, at-st and the ATT all been brilliant builds and look great would love to see a clone turbo tank or better known as the HAVa6 juggernaut at minifig scale that would be awesome.
Thanks for this
Cool :D
Would lowkey love to see some instructions on Halo stuff
not sure if this is accurate, i haven't had the privilege to see The Mandalorian (15 and big time broke,) but maybe for the pilot you could use one of the pilots from the cargo tank thing (i forget the name of it,) like i said, not sure if this is accurate or not.
Can uds build the fang fighter or the justifier from the bad batch
Great work!!!
I still remember you when I was a kid 😂
I am Waiting for new cad bane star ship
Dude how is this studlless building even possible?
MTT and Pod racers
Is it just me or does anyone also think this transport seems to be slightly smaller than it should be? From the show this transport doesn't seem to be that much smaller than the Razor Crest.
ok I went to the site where you can buy stuff but dose the pieces come with to?
Oh look! The not-TIE Reaper
This comment is underrated
@@johnwolverton48 Much appreciated ❤🖤
The youtube video is not linked in the Brick Vault page, I guess doing so would help people get more details to buy the instructions.
Can you make custom minifigure like the dark troopers
Has anyone put together a parts list? Or those things on bricklink
You can download the parts list on our website for free :)
@@BrickVault Thank youu
does this set come with minifgures
So I’m thinking of making a 1989 Batmobile with two seat do you have any advice?
Depends on the scale you're going for. Figs are much wider than people so conserving the width with beimportant. slightly staggering the seats might help you in that regard.
@@BrickVault this is why you guys are my favourite thanks for the advice 😀
Woah it looks like it's not built out of lego
Can u make the bad batch shuttle
Yesss
I think it'd be a good opportunity to have an alternate color scheme that is more gray than blue, as some people might think is better.
It would be insanely expensive but would be amazing
Hey Jack, Ik ur a superfan so could u plz sell the instructions for the Rick and Morty flying saucer?
My comment has been highlighted so I think he's into it
pls i want a mandolorian star fighter out rebels en clone wars with plaze voor 9 minifigs or the juggernaut out the mandelorian
I wish as a 10 year old I could buy it ☹️
Model idea: handos pirate ship
So its a knock-off LAAT i guess
Still waiting on the Republic Attack Shuttle, but this is pretty badass.
The 6 dislikes are from the Stormtroopers
Nothing……absolutely nothing is wrong with this piece art
A clone wars y wing should be made
Please build a Minifigures scale venator class star destroyer.
😂😂😂 it would be like 30 meters long
Can you to the imperial light crusior or imperial transport or darth Vaders executor
Can you make the bf 109 ?
Lego sarlacc pit moc please
Crucible
You guys should make a modified version that can carry an deploy you repulser troop transport.
Very good looking model but way to expensive if you want to build one for yourself. 300-400$ never
2nd
Uh, it’s called imperial troop dropship
Why is it that I don’t remember this at all?
It’s in the mandalorian season two
@@themanwhowouldbebrick yeah I know it’s just I totally forgot about it after seeing it
@@thatelectropig8678 ok
At dt and at dp:🗿
A little late with this 😂
I don’t like the smooth look, I like more studs on my builds
I’m sorry i don’t like this one; it’s not the build, but the ship feels like a different type of si-fi, it just doesn’t sit well w me
Yeah , and bad batch squad
that's because it's based on sequel trilogy design