Auto Sleeper Nuevo Thetford C200 CWE Toilet Flush Repair
HTML-код
- Опубликовано: 10 авг 2021
- At last a problem that can be fixed for under £1.
If the C200 CWE toilet in your Auto Sleeper does not flush then this is very likely to be the problem and you may not even have to buy a new pump for the cistern. Авто/Мото
Great video, it is best to put a rag in the hole to stop the screws falling into the cistern
Thank you. That's a sensible suggestion.
What a brilliant video. Thank you. Knowing what do makes all the difference. My wife was very impressed! Plus it saved the hassle of sourcing and fitting a replacement. Excellent presentation and tips, top marks!
Haha! It makes me very happy to receive such a good comment thank you. Happy motor-homing.
Immediately thought that it was the blue button/ bezel so I am just about to replace the whole unit. However, in searching out you video, I realise that there are other possible faults (fuse & pump!). Thanks for posting; I will let you know how I get on!
Thanks, valuable video, fixed my issue straight away! Greetings from the Netherlands
Excellent - I hope you can enjoy some travelling now.
Please may I thank you for saving me a whole load of work. I was all ready to renew the pump, but when I forced the rotor to turn it immediately started running. Thanks again.
Absolutely made up with this. Just got to site and nothing working. the same as this. Followed this and yes it was jammed. Freed it off and it works great so a big thank you from me.
Fantastic you found the vid so useful and the nice comment. Have a lovely time in the sunshine.
Thanks! Fixed in 15 minutes….even after dropping a screw into the cistern (recovered). The excitement of fixing it just got to me!
Haha😂 dropping that screw must have been a low point. Glad you loved the feeling of accomplishment but just imagine how good I feel at having created such a successful bog fixing vid. Enjoy the freedom of your next dump on the road Nick. Thanks for the appreciation.🚽
Thanks for the video! I didn't know how to fix the toilet for 2 years - now everything works.
Good work, well done.
Thanks… showed me exactly how to get to the impeller which was ceased solid. Got it moving and now all works perfectly. 👍
Great to hear. I’m really glad I bothered recording this, quite a few people seem to have the same problem to deal with.
excellent sorted my issues out as I had no idea where to start cheers
Brilliant, found pump seized, moved impellor, now sorted, thank you
Thanks. I needed to know how to get into the cistern. Trying to lever up that top panel would have been a last resort - but I now know that is the right answer!
Well done Ian. DIY is the way!
Great video, saved me hours, easy to follow, fixed it in under an hour at nil cost.
Thanks @@davidwoodford128 I’m pleased to have been some help.
A Very Pleased Bunny here, when I found your video that showed my Thetford Model and how to remove the button plate and yes, the impeller was siezed solid but all is well now 🤞 Many Thanks!
Well done 🚽I’m glad it’s helped.
Good video thanks! I changed the fuse first but managed to blow it again without realizing whilst clearing the pump so if it doesn't work, try a fuse check after everything's done. One happy father in law!
I'm glad it's helped you and that's a good tip about rechecking the fuse. Well done and Happy Easter 🚽
Great video, very informative, fixed my issue straight away 👍👍
Thanks Andy! This just saved us on site! Great video, really appreciate your efforts!
Glad it's been useful have a good trip.
Many thanks. Just fixed that exact problem, thanks to your guidance.
Cheers I’m glad to have helped. I hope you enjoy the summer now.
Great video, I'm sure that must be what the problem is with mine. I'll check tomorrow. Our scenario is exactly the same as yours. Here's a laugh, went to Halfords for new fuses and asked for an 'E' not 3 lol. Bloody eyesight. 🤣🤣🤣
I spent a while looking for an E on my box of spare fuses 😂
@Andy Sanderson, sorted in 5 minutes, thanks again 👍
@andysanderson forgot to drain the cistern again, pump working now 🤣🙄
Great advice. First time using the toilet on site, flusher not working. Straight to the problem with this video, propeller stuck.
What a relief……literally! Glad it was helpful.
Thank you for getting me out of trouble 😊
I’m really glad it’s been useful for you.
Great straight forward video 👍👍
Am I right in saying the flush is a seoeratw fill from the sink and hot water ??
Cheers Paul.
Thanks. Exact same problem. Fixed and cleaned up around the top while at it. Simple when you know how. 👍
Good work let’s hope it doesn’t need doing again next year if it’s drained down.
@@AndySanderson I'm from New Zealand, we use our caravans all year round. It was just age and general maintenance this time. Thanks for putting up this clip, I use RUclips for lots of fixit issues.
Thank you for the video! I've just managed to sort out the same issue 😀
Well done. Happy travels.
Many thanks for this video and very useful,
Great timing my loo has just stopped working, . So I will have a look at mine 👍
Haha thanks John. Buy some Imodium for back up though 🤣🤣🤣
Thank you so much. Perfect Video.
Nice of you to say thanks.
Thanks, I will give that a go in the morning, cheers. 😉👍
Good luck. Just take your time.
Super film mate.
Thanks for your appreciation.
Useful info. BTW it’s really easy to reach the fuse with the waste tank out. I’m not 100% sure but it might need a 5amp fuse. Other Thetford toilets do. That might be the reason it blew.
Thanks a lot , it was very helpfull
Great repair 👍
So glad to have helped you thanks@@tonyfrewin4822
@Andy Sanderson if it easy to dismantle and clean that switch on the top (under the blue press button) as mine is sticking on when you press it (feels like it sticky beneath).
@@AndysPropertyVideos Cheers, thanks for letting me know
Thank you very very much!!!!
Nice of you to say that. I’m pleased to have been helpful and enjoy some good summer trips now.
Thanks so much!
I’m glad it’s helped you. Enjoy the summer now.
Hi a have a dometic ct4000 when a press the flush motor runs but no water comes into the bowl can you advise please
I’m sorry. I don’t know anything about DometicCT4000’s and can’t help. Good luck finding a simple fix.
If i could id put more than one thumb up!
Thanks a bunch
That made me laugh. Thanks for saying.
Can you show me your wiring
Sorry I cant as I don't own the vehicle anymore.
My toilet has the exact same issues, blowing fuses just happened this year, I think I forgot to drain it down last year, I've had a look inside and it's a black mess, so I've flushed it out a few times, put some Milton in, I'll let that dissolve the rest of the algae, before I attempt to remove the pump, but thanks for the video, I'm pretty sure this is the problem :)
Good luck and get out on the road again soon.
O replace the fuse it's easier to take the cassette out...
Grande desde España !!!