Samsung Galaxy Note 2 Screen Repair Guide
HTML-код
- Опубликовано: 16 сен 2024
- www.RepairsUniverse.com - Need to replace the screen or other internal components on your Samsung Galaxy Note 2? This video repair guide will walk you through each step of the way, from tearing down the device and even replacing the full screen assembly. www.repairsuniv...
Thanks for posting this very good & easily understood repair video. I'm 63, so I'm sending this to my 27 y.o son for his help. I'm certain I would have some parts left over :-)
Nice job Repair Universe!!
+Larry daniel. You install the new screen in the reverse order. Only deviation you have is the installation of the 2 sided adhesive. Which bonds the perimeter of the glass screen to the plastic frame. Once you have done this then everything else is installed in the reverse order. Good Luck
This video was very helpful to me.The best so far on RUclips.Thanks uploader!
Thank you Sir,
Have a great day
You are welcome! More grease to your elbows for the very elaborate videos!
Thanks for posting this. While I was terrified of removing everything to fix my phone, the step by step was very helpful. I was able to fix, put everything back together and it works!
We love to hear that a customer has completed there repair successfully with the help of our videos. If there is anything we can help you with please don't hesitate to ontact us.
Not sure why the screen would go black if you were removing shards from the touch screen. Perhaps a connection to the LCD screen (inner display) became loose?
I have literally pulled my entire phone apart while watching this video, thinking this was how to replace a cracked screen. It's now in about 30 pieces, and I've gotten to the end of the video and realised I didn't need to disassemble the entire thing to fix the friggin' screen. Obviously this is my fault for not watching the entire video before beginning, but now I'm completely lost. It also doesn't look the same as your end product - the silvery grey screen that sits under the glass is shattered as well, which I probably broke as I was disassembling. I'm guessing this is a separate part altogether, but not sure what it's called?
I also wonder if all the components that I've removed inside will go back in, given that I've ruined the sticky backing them (flex cable, antenna, etc).
Any help would be appreciated, as my phone is not very old and I'd like to fix it. At this point, it looks like I'm going to have to throw it out. Thanks.
Thank you for the video. Very well done. I'd never attempt to do this by myself, but it was helpful to see the intricate functions.
My screen is totally black. I get the two grey icons at the bottom, sometimes. I've never dropped or wet the phone and I can still hear it working and receive calls, when I swipe the answer motion blindly.
My cell phone company wants to replace it, but can't transfer my data blindly. Can you suggest a way they might be able to save my data.
Your response is appreciated and date sensitive...a quick answer would be nice.
Thanks for the great review! Glad we could help!
An easy way to deal with that is to place tape on the damaged part of the screen. The tape will hold the shards together when you peel of tape. You may want to use masking tape or something strong.
I know a lot of people have asked but.... I dropped my phone, screen did not crack,screen flicked and then went black. I can still receive calls by swiping my screen. By your answers on previous comments it looks like its the LCD, can I purchase this alone OR do I have to purchase LCD + digitizer or housing,etc. Thank you so much 4 your help and great video
Yes unfortunately this will require the Touch Screen Digitizer / LCD Screen to be replaced. The repair requires the device to be disassembled. However, with the above video guide you can successfully replace the part without damaging other internal components.
i expected you to show how to put the screen back ..you only showed 1 way
THIS IS AWESOME MAN!!!
Thanks to this video I've just finished repairing my friend's Note 2, so THANKS A LOT!!! :)
Glad you liked the video Antonio.
how much would u charge to fix my phone
What's wrong with your phone?
Hello, as Antonio said. What is wrong with the device for a fix.
Thank you very, very much! After seeing that, changed mine in 23 minutes only.
I might have missed this, but how do you separate the LCD from the stylus flex? (The gray part on the back with the flex cable at the top.) I've only seen replacement LCD screens without this --- they only have the flex cable on the side. Thanks in advance!
I loved your tutorial great job I have a problem though1.Where can I find the tools to do this 2. My whole screen is shattered throughout most of phone though I'm still able to Swype, text, play games ex. Basically I just need to replace my whole screen any tips would be greatly appreciated.
Hi mate , thanks for the clip. I know its the reverse order to put a new screen however my doubt is, do we need any kind of glue material to put the new screen in ?? Your reply is much appreciated or if you have a video for that will be double great : )
melwyn d souza Are you referring to the cable that connects the LCD to the motherboard? Or the port on the motherboard that you connect the flex cable too? If your port on the motherboard is damaged then it might render it non-repairable. If the LCD cable itself is ripped then you will need to purchase another LCD.
***** The Note 2 indeed has a wolfson DAC. Specifically, it has a WM1811 which is the same as the tablet Note 10.1.
***** US version
***** Is your entire screen black? or producing a distorted image? We can send you the part and you can fix it yourself or you can send your device to us and we can fix it for you!
***** Follow the link in our description and place an order through our website!
Packing tape does the job nicely, it's what I use here at my work.
Thank you for this helpful video. As I was repairing my phone, I realized that 11 screws (the ones that you take out the first) are not the same size. In the video, you mentioned that all the 11 screws outside are the same size. However, 2 of my screws are different then the other 9 normal ones. one is longer and the other one is shorter. I've been having problems with my earphone jack not working well time to time. This is my first time opening this phone, but last year, I sent this phone to Samsung to get my screen repaired. Do you think maybe they misplaced some of my screws? What should I do? Thank you so much!
Maybe but samsung would have put it together great.
It could be just going bad. Parts do go bad in some cases. Check to see if you have any water damage on the device.
what is a display connector. and is it connected within the motherboard. if it doesn't work any possibility to replace it without changing the entire motherboard ? awaiting fro your reply
if i were to buy the whole LCD Assembly including the housing does it included the home button and the flex cable sensors?
My screen shows spider web looking cracking after working out at the gym yesterday and now doesn't come on at all. The phone is on, I can use my galaxy gear for calls, texting etc but the screen itself won't come on. I plugged it up to tv via MHL cable to make sure of it. The screen shows and the buttons work, but absolutely nothing from the screen itself, no display output, no touch response either. Can this be fixed simply with a screen? Or will I likely have to buy the entire LCD/digitizer kit? (in which case I might as well proceed with my full upgrade, considering the price for that kit)
Can you tell me something ? I would like to know what problem with my Note2.
I dropped my phone and my screen does not come on. All my screen turn black but I still can slice anything just black screen. And I watched your VDO and made me want to fix the phone by my self right now hahahaha. Thank you
aston jarumon Sounds as if your LED backlight on your LCD is malfunctioning, replacing the screen assembly using this guide should do the trick.
My wife's note 2 screen is cracked but it still works. Does she just need a new glass or is there a chance the digitizer is cracked also?
Thanks
Hi, I replaced the screen by scraping off front glass. Now I noticed there is a gold cable from mother board that was glued to top left front of glass. The cable was glued between the lcd and glass. Is that the screen sensor ? And should I glue it back on to new glass?
The device is for a samsung note 2 model t889.
what do you do if the screen is smashed and theres heaps of little shards. do you have to individually remove them all
Great guide, did it fairly well. However, after I replaced the new glass, it starts to bug whenever I use the screen more than 2mn (it basically acts as though I was touching the area in the middle of the screen), and I have to turn the screen on/off to bring it back to a normal use.
What do you think is wrong? The quality of the glass or maybe the space between the LCD and the glass which could be cleaned more thoroughly ?
The proper way to repair the screen is to fuse them together with LOCA. You can use 2 sided tape to place the screen but you will still have the same issues. You can send the phone to us and we can fuse the glass to the lcd for you its 60.00
www.repairsuniverse.com/repair-service.html
What is LOCA?
liquid optically-clear adhesive (LOCA). This is a Clear liquid adhesive once used is cured with a UV lamp to fuse the LCD and Glass digitizer together. This gives a factory OE repair. When you just use 2 sided adhesive it leaves a void between the LCD and GLASS which can cause ghosting, unresponsiveness, and dirt in between the LCD and the Glass.
great guide, very usefull, not like another magic guides )
That's great to hear!! We are glad to help you out! Remember you can go to our site for any parts you need and the videos and support to fix them yourself! Repairsuniverse(.com) Have a great day!
Fantastic, clear tutorial - made it easy to replace my digitizer / LCD assembly. Thanks!
Ok so parts do we need the adhesive for? Do you have a tutorial on putting everything back in place ? Please help!
Samantha Saunders Use the adhesive to seal the screen assembly back to the front bezel. Cut strips of it and run it along the edge of the glass on your replacement screen.
Hello Sir.
Good day to you.
I accidentally dropped my Galaxy Note II in a vertical state & the LCD screen display is sort of blurry.
Could it be the digitizer problem?
I tried disassemble it & reconnect the ribbon film wires or whatsoever it called but it is still giving the same results...
I hope you can help me on this sir.
i just want to know where is the touch screen sensors as its not responding in my phone?? its just respond when i use the styles pen..
I'd like to just make sure all I need is the screen before I purchase it. I have a shallow crack that runs from the bottom left of my screen to the middle right.
Will I need ONLY the screen at $9.99 to repair this?
Does the speaker grill go fat side down? Im pretty sure it does. Just confirming because mine cracked there :(
i've just dropped my note2 into water, everything seems to be working fine but not "menu" and "back" touch buttons. and a speaker sounds a bit noisy. nvm about that. any idea what can i do to make those buttons work again. Thanks alot for any help
Hi, any idea if I can/where I can get a new home flex cable? I was successful in putting on a new lcd/digitizer/screen except I need to put new adhesive on the screen and I messed up the home flex cable. Any links would be much appreciated :)
Hello Nathan, I have spoke with my warehouse manger to get the part in for you . We should have the part you are looking for in a week or two please check repairsuniverse.com for the update. Thank you.
I was picking pieces out of the top because of bad habbit and now the screen doesnt work its gone black ; - ; do you know anything about that
great tutorial not sure if im up for it though. insane
I had my screen replaced under warranty, but the returned phone now exhibits phantom presses on the capacitive menu button. They also upgraded my bootloader and I tripped the knox bit and cannot get it fixed under warranty any more. The phantom presses appear a couple of times during the day, and when they do, the phone is unusable due to the frequency of the presses. After some time (5-10 minutes), the presses disappear and the phone is perfectly usable again. Do you have any suggestion as to what might be the problem, and how to fix it?
How was the repair done? Better yet who did the repair? Was it the carrier, or a repair shop? IF the repair was done with LOCA (clear acrylic sealer) then the digitizer may be defective. If the repair was completed with 2 sided adhesive the void between the Digitizer and LCD could be causing the ghosting. If all else fails and they don't want to fix the issue. You can send the unit into us for a tech to look at it, and fix the issue for you.
Can you pls Help my i cant fox my phone bcoz of icon that affearing that the USBSecurity has stopped how can i fix it pls respond Thank You so much.
Well I just lost everything i've ever loved under 10 minutes
WATCH that top upper left where the AMOLED digitizer ribbon cable lives. I don't see video authors warning users that this cable is VERY sensitive, and I tore it completely, using a guitar pick. I was careful but none of the videos I watched of this being done warned me how easy it is to kill my display just by prying on the TOP UPPER LEFT of the Note 2.
$150 later using Ebay parts, all is well now. New digitizers are expensive and many people kill theirs just trying to replace the glass. I recommend NOT TO PRY on the top upper left of the Note 2. That ribbon is very exposed and the digitizer will no longer respond to touch of fingers. S-pen still works great, display still works great, very annoying!
TELL ME pls
After removed the broken front glass to attach new glass which type of glue we can use? how to apply glue ? fully screen or only side of the screen?
Raghu CP Chitlur We do not recommend a glass only repair. You would require liquid adhesive and UV lighting to treat it and complete the repair correctly. Unfortunately we do not offer the required tools nor adhesive.
i dropped my phone really hard after receving bad news and the screen is badly broken but i can receive calls and when i use my stalys it answers that just means the glass needs to be repaired correct??
My screen is cracked on my Samsung galaxy note 2 i can still use it, but the cracks are annoyin, the cracks dont affect the touch functions, but more wee shards of glass are falling out and making it ruff to touch, do i need to replace the whole lcd screen or is it just the front glass?pleeeeeeaase help ta
If my digitizer works but my screen is cracked badly(I have two holes two the connectors on the top by the camera and speaker) how can i see if my lcd is broken? I've seen cheap glass on amazon but its just the glass.
Can you still see images on the LCD when you power the unit on? You would visibly see any damages to it. Regardless I recommend replacing both LCD and touch screen as these units have a fused screen.
I just did like in your guide but the screen is all black and the touch work. also the back and menu doesn't work can you help me to fix this
This would be a case of the home button flex being damaged from moving your touch screen + LCD .
If you notice in the video you have to take your time when removing the kit as you could damage the flex cable.
If the cable is damaged here is your replacement part. www.repairsuniverse.com/samsung-galaxy-note-2-navigator-flex-cable-ribbon-with-sensor.html
I don't know if you monitor comments but even if not perhaps someone can answer my question. My Note 2s LCD is cracked (the glass is okay). I have some passwords stored on it that I'd really like to access. Now, I have an S3 as well and was wondering if I could connect the S3's LCD to my Note 2's motherboard as I believe they use the same flex cable and same sized port. My concern with this is power draw and essentially how much power is pushed to the LCD itself. On one hand I wouldn't mind it not working, but on the other hand, I dislike the idea of possibly feeding the S3's screen too much power as a result of it being connected to a Note2's battery and motherboard as I assume more power is pushed to the Note 2's larger screen by default. That may not be at all how power works with these devices but I just don't want to end up with 2 bad LCDs. Do you think this is a viable solution or would the power from the note2 going to the s3's screen cause a problem? I hope that was clear. I'm just trying to piggyback my note2 onto an S3s screen without ruining the S3 itself. Thanks.
Unfortunately we highly doubt this would work for you. I do apologize to break the news. Although the flex cables may look the same, the units are two different models and require the same exact flex cables to function. Your device should not get damaged if you attempt this but it's highly likely the outcome will not be what you are seeking. Hope this helps.
Great thank you for the reply. I discovered that the app I was using to store passwords has a cloud storage feature which I had previously activated at some point so I didn't even need to risk it as it turns out it just automatically downloaded to my new replacement. Again thanks for the response!
You're welcome!
Hello
Very helpful
My note 2 screen broke and the screen used to still turn on but now it doesn't. Do i need to replace the digitizer or something more? Help me please =)
Sounds like the LCD is out. With this repair you will need to replace the Touch Screen + LCD.
www.repairsuniverse.com/samsung-galaxy-note-ii-screen-replacements-repair-parts.html
It sounds like the touch screen is becoming dysfunctional. If you decide to replace it we have the part available at RepairsUniverse (dot) com.
Anybody know where I can pay to repair my phone?
thanks guy, i love ya
Im trying to replace my galaxy note 2 screen but one of my screws are striped for some reason is there a way I can replace it with taking out the screws?
Titus Gregory Is the of the screw stripped or does it just spin? If it just spins try sliding a flat head under it to create tension while you unscrew it. If the head is stripped out from using the wrong side screwdriver. You can try this. Take a little superglue and put it on the tip of the screwdriver and hold it to the head of the screw. This will allow you to remove it with no issues.
Thanks I was able to remove the screen with taking the screws out.
Titus Gregory I'm happy to hear you got it out. I hope the rest of the repair smoothly
hi can you help me with my problem? when i switch on my Note 2 it shows a white screen what is the solution to my problem ?
May be the LCD that is no longer good. Replacing the LCD should resolve this issue so as long as your unit does not have any software issues.
Can I just start to the screen rather thatn opening the back? is it rally necesary to open everything? why?
+Mr Asian Sone The phone must be disassembled to access the display connection.
I believe you are referring to a glass only repair. To replace the display the phone must be disassembled.
Hi i had a question my screen gets fuzzy when it's hot why is that? It works fine its just the screen
It's possible the LCD may be on its way out or possibly a bad connection.
Okay. Thank you(:
Not a problem! we're always here to help =]
why is it heating up in the earpiece area?
And is when I have a sdcard inserted is my note 2.
Anybody HELP!!!!!!!!
Hello Ruben, What is heating up ? Is the device heating up the earpiece speaker? What happens when you insert your sd card ?
Its the lcd when the phone is on then I push the lcd and it goes black
Ruben Fernandez Don't put any unnecessary pressure on the LCD, it might break. Has the device ever been wet? or had any liquid damage?
Hmm, any luck on that?
Dude my note 2 has a perfect screen but the LCD does not show up even after a night full charge
Its a good and helpful video but id never remember how to put it all b
Zoe Summers If you have any issues, contact us! Our technicians will gladly walk you through the process.
i dropped my phone but the system is still working the screen is flikering whenever i turn it on and only a little bit what should i do?
ianni huang If the actual display is damage, which sounds like it, replacing the LCD and Touch Screen digitizer will resolve this issue.
Why would you murder this phone?! I literally just cried watching this!
I should have just hired someone
helo brother tell me hack the WiFi password
WE DO NOT WANT TO REPAIR ONLY ONE PHON IN AAL DAYS.
Check out RepairsUniverse (dot) com!
Hi mate , thanks for the clip. I know its the reverse order to put a new screen however my doubt is, do we need any kind of glue material to put the new screen in ?? Your reply is much appreciated or if you have a video for that will be double great : )
I have removed cracked screnn glass from my note 2 .but i am facing an prolem that is screen display is not showing disply well it shows some fault in display display is looking good no crack on it just display showing problem...plz help me out should i change all assembly or just amything else plz solved it out and help mw out thnq