Some articles make graphite oxide via the modified hummer's method, how might the procedure in synthesizing graphite oxide be different from making this graphene oxide?
Hello friends, I hope you are all well. I needed graphene oxide for my thesis, so I followed the steps mentioned in the video and obtained a solution. I intend to use it to spread zinc oxide on a substrate. Is the obtained solution suitable for this purpose? Also, how can I determine the concentration of the synthesized graphene oxide solution? Please advise.
It’s may turn deep yellow ..but you will get it in black color when dried…follow decantation till it is neutral then can oven dry to get the final product
@@drarifsiddiquie5443 sir I'm using filter paper to filter the content it get stucked in the filter paper itself and I'm not able collect anything Remaining and all I get properly as mentioned in the video What i have to do for filtration and I used Dil HCl for washing Please clarify my queries Thankyou in advance
25ml sulphuric acid 1g graphite powder 3g of potassium permanganate 50ml water (dropwise) 100 ml of water after dark brown color appears 5ml of Hydrogen peroxide to stop the reaction
Alexey Eliseykin tbh i am not sure, because i haven't performed this in lab but learnt it on Google classroom lol. i think potassium permanganate will oxidise graphite and hydrogen peroxide is added at end to stop the reaction
This is a rough outline of the method not a guide on how to create it. I advise you simply google Graphene Oxide by Hummers Method for the absolute formulas/concentrations.
What if when i add water, the color of the solution does not change to brown? The color stay black even after i put the hydrogen peroxide. Do that mean the graphite does not oxidize?
Because adding water to acid produces an exothermic reaction (heat). It can cause the water to boil and erupt splashing acid on you. To be safe you want to use AAA or "always add acid" that way the heat is transferred into the water and gives it a chance to cool down before vaporizing into steam. Since the order of this is to add the acid at the end, they suggest adding it slowly so it doesn't boil and hurt you. If I was wrong about any of this, hopefully someone smarter than me will correct me
Ankita Singh you should try to make your reaction more environmentally friendly, therefore an alternatives for such dangerous(hazardous) reducing materials has to be employed!
Please, make an erection this video as it is not adequate to make a GO solution. I refer to use some bath sonication procress, ultra centrifugation ,filtration and washing, dialysis everything is important to produce a high purity, clean GO acquous solution
@ranikabir I try for making graphene oxide i go through so many literature also used sonicator, centrifugation and washing seven or eight times but XRD peaks are not matching with the literature i can't find what is the reason behind them kindly share yours experience Thank you.
Thank you very much. Very clear and easy to understand. I was able to synhtétiser GO, thanks for the video
hi, i'm about to do research using GO, is this method is quick and simple based on your experience?
This method is cool and Very accurate method.
Super! Thank you very much!
It's really useful. Thank you guys.
Best method 👌
Thank you very much, I will try this methode
Detailed OG recovery and cleanup protocol?
please make a video for GO purification. your videos are tooooooooooo good.....:)
Put it in a microwave, that's it
@@danielvidal8720temperature & Duration?
Some articles make graphite oxide via the modified hummer's method, how might the procedure in synthesizing graphite oxide be different from making this graphene oxide?
thanks alot for uploading sir. may i know that whether we can use ice bath while adding water or not ?
Hello friends,
I hope you are all well.
I needed graphene oxide for my thesis, so I followed the steps mentioned in the video and obtained a solution. I intend to use it to spread zinc oxide on a substrate.
Is the obtained solution suitable for this purpose? Also, how can I determine the concentration of the synthesized graphene oxide solution?
Please advise.
Great, I have subscribed
How can I make graphene oxide paper from graphene oxide powder
Thanks a lot
I'm working on graphene can you tell me about the colour of final product?? And also about the filtration process
It’s may turn deep yellow ..but you will get it in black color when dried…follow decantation till it is neutral then can oven dry to get the final product
@@drarifsiddiquie5443 sir i am trying this method but witth DI water how is it possible to increase pH from 3.3 to 7.
@@drarifsiddiquie5443 sir I'm using filter paper to filter the content it get stucked in the filter paper itself and I'm not able collect anything
Remaining and all I get properly as mentioned in the video
What i have to do for filtration and I used Dil HCl for washing
Please clarify my queries
Thankyou in advance
If at a certain point I want to add another precursor, where and how am I supposed to do it?
I think that the result is Graphite Oxide?
Hello guys?? Pls, is it advisable to carry out the synthesis under reflux while heating to higher temperature??
Can boron nitride be used as HTM? pls answe with reasons.
Excus me, what is the concentration of these reagents?
25ml sulphuric acid
1g graphite powder
3g of potassium permanganate
50ml water (dropwise)
100 ml of water after dark brown color appears
5ml of Hydrogen peroxide to stop the reaction
@@iqraurooj6516 amm hydrogen peroxide to stop the reaction? But is hydrogen peroxide needed not for the oxidation of graphite !?
Alexey Eliseykin tbh i am not sure, because i haven't performed this in lab but learnt it on Google classroom lol. i think potassium permanganate will oxidise graphite and hydrogen peroxide is added at end to stop the reaction
Thanks
What is the concentration of sulfuric acid and hydrogen peroxide used
Concentrated I guess (we need not to change the molarity)
How to mix graphene oxide into polymer based resin ??
Hi would you contact me please !
sir, please share the journal reference. because I need a journal reference for the process of making this graphene 🙏
There are thousands of related publications from prestigious publishers. You can access them easily thanks to Sci-Hub or Z-library.
Please explain graphite to graphene by using dry I method
green synthesis graphene oxide From graphite powder why we use this process please give examples
In Modify Hummer process
How much yield of graphine oxide can we get by doing this
is it necessary to add magnetic beads..? can we carry this synthesis without them
You can make such machine diy
@@omsingharjit ??
Then use ultra sonicator…all we need Is centrifugation ..magnetic beads are the cheapest options ..
What would be the concentration of h2so4 ?
This is a rough outline of the method not a guide on how to create it. I advise you simply google Graphene Oxide by Hummers Method for the absolute formulas/concentrations.
98 % concentration of sulphuric acid
why add 25 ml sulphuric acid . can we increase or decrease amount . Please guide me sir about .
definitely we can....but this is not the original hummers method..see original paper
@@drarifsiddiquie5443 sir how to approach you
@@muhammadnisarqasim636 you can approach me via linked in ..I am working on Graphene Aerogel
Why we use ice bath in hummer method?
Exothermic reaction, control heat
What if when i add water, the color of the solution does not change to brown? The color stay black even after i put the hydrogen peroxide. Do that mean the graphite does not oxidize?
Syafiq Asyraf yeah you may try to change your graphite! Alternatively, you can check at the purity of your reagents
Sir how i can make rGO
How to make graphene coated sand
any reference to this method??
Why we are placing ice, what is it's role....?
It is an Exothermic reaction. So temperature rise happens. Hence Ice bath needed
Did anyone know about the speration of graphite from coconut shell charcoal(grounding process)
My go turns green color after adding di what is the reason
why is the water step very dangerous?
Because adding water to acid produces an exothermic reaction (heat). It can cause the water to boil and erupt splashing acid on you. To be safe you want to use AAA or "always add acid" that way the heat is transferred into the water and gives it a chance to cool down before vaporizing into steam. Since the order of this is to add the acid at the end, they suggest adding it slowly so it doesn't boil and hurt you.
If I was wrong about any of this, hopefully someone smarter than me will correct me
how long it takes to achieve graphene oxide from graphite?
Mau bkin apa beb
How much GO will we get?
What is the melting point of grephene oxide ?
360 deg centigrades
I left a like, I left a like, I left a like, I left a like.
And what next with graphite oxide. Still long way to make Pure elastic powder like graphene.
You can make ink out of graphite oxide, you can add GO to concrete and plastics to make them stronger.
You can print super capacitor
can I know the mol of sulphuric acid?
It depends on the amount of natural graphite powder. Refer to any kind of paper is well
There is no use of sodium nitrate. Please explain.
Ankita Singh you should try to make your reaction more environmentally friendly, therefore an alternatives for such dangerous(hazardous) reducing materials has to be employed!
Could any one say how to fuse bacterio nano cellulose formed by Glucanectato Hanseni vith GO???
What is need of ice bath?
Just to cool down..the reaction is highly exothermic
What could I use as an ice bath - any ingenuity idea to find locally?
What is the use of Graphene Oxide ???
to form functional grapene, the oxide will bond to other molecules.
For making useful graphene
Pfizer vaccines
To make graphene composites
Please, make an erection this video as it is not adequate to make a GO solution. I refer to use some bath sonication procress, ultra centrifugation ,filtration and washing, dialysis everything is important to produce a high purity, clean GO acquous solution
@ranikabir I try for making graphene oxide i go through so many literature also used sonicator, centrifugation and washing seven or eight times but XRD peaks are not matching with the literature i can't find what is the reason behind them kindly share yours experience Thank you.
Useless vedio