Audi A3, A4, A6 and TT instrument clusters LCD pixel repair

Поделиться
HTML-код
  • Опубликовано: 21 авг 2024
  • 👨‍🔧 This tutorial shows how to repair the Jaeger and Magneti Marelli dashboards of Audi A3 8L (1996-2003); Audi A4 B5 / 8D (1994-2001); Audi A6 C5 / 4B (1997-2004); Audi TT MK1 8N (1998-2006), replacing the not working display with Minitools part SEPDISP09. It can often happen that those instrument panels LCD screens may be completely blank, fading, show flickering segments, have dead or failing pixels and therefore be unreadable. With Minitools DIY tutorial and the replacement half fiss display you won’t need to replace the whole cluster, but just the faulty display.
    🔧 Tools and spare parts useful for this repair:
    • Minitools display SEPDISP09 store.minitool...
    • Minitools spudger SEP-SPA04 store.minitool...
    • Minitools triple curved tip probe SEP-PUN05 store.minitool...
    • Minitools flat short nose pliers SEP-PN-2003 store.minitool...
    • Minitools large face gauge protective disc SEP-PRO01A store.minitool...
    • Minitools small face gauge protective disc SEP-PRO01B store.minitool...
    • 2x tweezers with round tips SEI-MTQ-13 store.minitool...
    • Desoldering braid SEI-TRE2B store.minitool...
    • Safety dosing bottle for solvents SEIJL-40 store.minitool...
    • Torx T10 screwdriver;
    • Brush;
    • Soldering iron with needle tip and chisel tip;
    • Hot air desoldering iron.
    📌 For more information on spare parts useful for repairing instrument clusters, infotainment systems, car radios and sat-nav, go to store.minitool...

Комментарии • 4

  • @MinitoolsChannel
    @MinitoolsChannel  2 года назад

    Replacement display available at store.minitools.com/en/sepdisp09-audi-a3-a4-a6-tt-lcd-display.html

  • @Billy97ify
    @Billy97ify Год назад

    I did mine and it was perfect when I first tested it but now it shows all bright red and blank with no characters. Does it need some reset or adaptation?

  • @Billy97ify
    @Billy97ify Год назад

    I did mine and it was perfect when I first tested it but now it shows all bright red and blank with no characters. Does it need some reset or adaptation?

    • @MinitoolsChannel
      @MinitoolsChannel  Год назад

      Hi, it is most likely a matter of soldering or cleaning problem; please contact us for more information via e-mail: info@minitools.com