Replacement display for Volkswagen Golf IV and Bora available at the following link store.minitools.com/en/sepdisp36-lcd-display-for-audi-ford-seat-volkswagen-dashboards.html
Hi, thanks for the nice feedback! May we ask you to send an e-mail at info@minitools.com detailly explaining the issue and attaching some pics of the cluster? Our technical team will have a look into it! Thank you.
Hi, I changed my km counter without display to one with a display, but it doesn't indicate the temperature. Can you tell me which PIN the external temperature sensor should be connected to? So I'll wire it up, thanks
Hi, could you please let us know the producer of the cluster sending us an e-mail at info@minitools.com? The connections may change based on the producer (e.g. VDO, Jaeger, Bosch, MotoMeter etc.)
Hi @@fwdsmatter1117, the only way to check it would be to remove the cluster from the car; the make is usually either printed on a label or marked on the rear cover of the cluster.
Hi, the fluxing liquid should be used with caution. If applied in excess in areas with narrow spaces where it is difficult to remove it, a residual excess of flux could cause short circuits between the conductor tracks and damage them.
Ciao, potresti gentilmente inviarci un'e-mail a info@minitools.com allegando una foto del quadro strumenti e spiegando il problema? La nostra assistenza tecnica potrà esserti d'aiuto. Grazie.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Replacement display for Volkswagen Golf IV and Bora available at the following link store.minitools.com/en/sepdisp36-lcd-display-for-audi-ford-seat-volkswagen-dashboards.html
Very nice explanation. ¿What should i do with mine? It only stops showing good after a driving time.
Hi, thanks for the nice feedback! May we ask you to send an e-mail at info@minitools.com detailly explaining the issue and attaching some pics of the cluster? Our technical team will have a look into it! Thank you.
Hi, I changed my km counter without display to one with a display, but it doesn't indicate the temperature. Can you tell me which PIN the external temperature sensor should be connected to? So I'll wire it up, thanks
Hi, we're afraid we can't help you as we deal with instrument clusters repairs, we don't do upgrades.
What kind of motometer did You install? Maybe i can help You.
@@tomek8266 Thanks but I've sold that bastard of a car now
good information
Good video, is it possible to fix this any other way? Maybe vcds to give it higher voltage?
Hi, thank you! We recommend to install our display only by following the instructions shown in the video.
Ive got a half screen, would it be the same connections?
Hi, could you please let us know the producer of the cluster sending us an e-mail at info@minitools.com? The connections may change based on the producer (e.g. VDO, Jaeger, Bosch, MotoMeter etc.)
@@MinitoolsChannel where can I see the make of the cluster on the cluster?
Hi @@fwdsmatter1117, the only way to check it would be to remove the cluster from the car; the make is usually either printed on a label or marked on the rear cover of the cluster.
How can flux damage the board irreversibly??
Hi, the fluxing liquid should be used with caution. If applied in excess in areas with narrow spaces where it is difficult to remove it, a residual excess of flux could cause short circuits between the conductor tracks and damage them.
@@MinitoolsChannel can flux make short circuits?? but flux does not drive electricity
Ma qualcuno che fa queste riparazioni!!??
Ciao, potresti gentilmente inviarci un'e-mail a info@minitools.com allegando una foto del quadro strumenti e spiegando il problema? La nostra assistenza tecnica potrà esserti d'aiuto. Grazie.