I want to say that you have really helped with my gaming and pc experience in general for literal years ive used your tutorials and since ryzen master decided not to work for me anymore I had to manually get a undervolt and this taught me how to get it done thank you
There is a program called CTR 2.0 I used it to oc my r5 3600. I just clicked "diagnostic", when the process was finished the programm suggested 2 profiles: 4.2Ghz/1250mV and 4.4Ghz/1350mV.
Thanks I managed to lower the Core Voltage on stock settings from 1.55 down to 1.35 and gained +400 mhz on all cores while temps averaged in the 40 to 60 degrees celsius - i dont really game that much but defintely gained performance boost when using heavy programs like Ableton, and Adobe! Is it fine for the longevity of this SoC to pushing 4.0+ ghz all the time even if temps are low? I have a new cpu coming soon but I want to keep this cpu in good healthy condition! thanks again!
Cool video. I updated the bios of this motherboard according to your video. I have 5 5600 X + DS3H B550M, but for some reason the m2A CPU (upper slot) does not determine the ssd drive. I don't know what to do. Perhaps the processor does not support it.
Is this process any different for the ryzen 5 5600g? I assume ill have to adjust the clock speed based on that apu but im really not too experienced with overclocking
Hi there, I am following your guide but I am using the s2h version of this board but I cant seem to get over 4.0 ratio without getting an incorrect bios settings error on boot, is there anything I could do to fix or get past this? Thanks for the reply in advance
Hi,have exact same motherboard and CPU,but when i boot into windows i checked and it shows the 4.5ghz but only 1.1 VID(also the oc is not stable since 1.1volts)
Can you make a tutorial on how to overclock the ram with the same cpu and motherboard please. Or you did you already do it, but I missed it. That would be much appreciated.
I have a video on Ram OC on this board with the Ryzen3 3100 which would be the same way with the 3600. Here is a link to it. ruclips.net/video/HS2BbRKZuLc/видео.html . Thanks for watching and the comment.
what im doing wrong? If i change the CPU clock ratio to 45, CPU Vcore to 1.352 and disable PBO, i have a crash and my windows does not start. I have the last bios version. Ryzen 3600 and b550m ds3h. Can you help me? Please. Thank you.
I want to say that you have really helped with my gaming and pc experience in general for literal years ive used your tutorials and since ryzen master decided not to work for me anymore I had to manually get a undervolt and this taught me how to get it done thank you
You are welcome, Glad I could help you. Thanks for watching and the comment.
Thanks for the video, I wanted to take advantage of the winter temperatures here and safely OC my Ryzen 5 3600
The only video that has actually helped me! Thanks for this
There is a program called CTR 2.0 I used it to oc my r5 3600. I just clicked "diagnostic", when the process was finished the programm suggested 2 profiles: 4.2Ghz/1250mV and 4.4Ghz/1350mV.
Them sound like pretty good overclock. Thanks for watching and the comment.
Thanks for the video 🔥
You are welcome. Thanks for watching and the comment.
thats an insane overclock
I think it did pretty good for that budget motherboard. Thanks for watching and the comment.
Hi mate thanks, will use it for boosting XMR mining hashrates! Thanks for the video and the comment that will follow!
You are welcome mate, Glad I could help you. Thanks for Watching and the comment
Thanks I managed to lower the Core Voltage on stock settings from 1.55 down to 1.35 and gained +400 mhz on all cores while temps averaged in the 40 to 60 degrees celsius - i dont really game that much but defintely gained performance boost when using heavy programs like Ableton, and Adobe! Is it fine for the longevity of this SoC to pushing 4.0+ ghz all the time even if temps are low? I have a new cpu coming soon but I want to keep this cpu in good healthy condition! thanks again!
Hi! On this process that you did? Did you touch PBO? May I know the settings you set for PBO?
If overclocking the CPU you need to turn off the PBO that way it does not override your settings. Thanks for watching and the comment.
@@DavesTechway I see. So both PBO and Core Performance Boost should be turned off. Thank you so much!
nice work men thank u 🖤
You are welcome, Thanks for watching and the comment.
Cool video. I updated the bios of this motherboard according to your video. I have 5 5600 X + DS3H B550M, but for some reason the m2A CPU (upper slot) does not determine the ssd drive. I don't know what to do. Perhaps the processor does not support it.
Not to sure. But the 5600X should detect any SSD in that slot, Maybe go back one BIOS version. Thanks for watching and the comment.
Will this harm my system in any way? Will it decrease the lifespan of my CPU or MOTHERBOARD?
It will decrease the life spam of the CPU a little bite not usually not enough to where you will notice it. Thanks for watching and the comment.
hi just wanted to know if its safe to manual overclock to max hz on my 3600 on gigabyte ds3h b450 motherboard
Is this process any different for the ryzen 5 5600g? I assume ill have to adjust the clock speed based on that apu but im really not too experienced with overclocking
Yes, if you are using this motherboard it would be the same process. Thanks for watching and the comment.
Will this work on B550m DS3H ac mother board ?
my pc keeps turning off , do i go lower voltage or ?
Been just getting into pc's. What's the purpose of "overclocking"?
You gain extra performance on gpu or cpu. For example overclocking a r5 3600 can make it perform like a 3600x.
Thanks for watching and the comment.
To get better performance out of the CPU,GPU, or Ram. Thanks for watching and the comment.
Would I be able to attain the same frequency while using the same setting using a gigabyte b450m ds3h v1 motherboard?
Hi there, I am following your guide but I am using the s2h version of this board but I cant seem to get over 4.0 ratio without getting an incorrect bios settings error on boot, is there anything I could do to fix or get past this? Thanks for the reply in advance
what voltage and ghz do i put on 5500?
Hi,have exact same motherboard and CPU,but when i boot into windows i checked and it shows the 4.5ghz but only 1.1 VID(also the oc is not stable since 1.1volts)
How much Vrm this board has? Does the Vrm good and safe for overclock?
It has 5+3 Phases Vrm, Yes it is pretty good for Overclocking. Thanks for watching and the comment.
Can you make a tutorial on how to overclock the ram with the same cpu and motherboard please. Or you did you already do it, but I missed it. That would be much appreciated.
I have a video on Ram OC on this board with the Ryzen3 3100 which would be the same way with the 3600. Here is a link to it. ruclips.net/video/HS2BbRKZuLc/видео.html . Thanks for watching and the comment.
Texas?
what im doing wrong? If i change the CPU clock ratio to 45, CPU Vcore to 1.352 and disable PBO, i have a crash and my windows does not start. I have the last bios version. Ryzen 3600 and b550m ds3h. Can you help me? Please. Thank you.
The 45 is to high for your CPU. Thanks for watching and the comment.
I dont understand. In this video, you overclock the same Ryzen 3600 to 46.
@@vulpix11 not every cpu will overclock the same buddy. his 3600 hit 4.5 but that doesnt mean your 3600 will hit the same. try maybe 4.3 or 4.2ghz
What cpu cooler did you use?
I was using the stock CPU cooler. Thanks for watching and the comment.
What is a good setting for a i5 11600k
I never had an B560 motherboard to try to overclock on. I'm not sure. Thanks for watching and the comment.
Hi. Do you can oc rams on this motherboard up to 4k + mhz?
Yes, it says up to 4K without an APU, and up to 44K with an APU. Thanks for watching and the comment.
@@DavesTechway One day maybe doin a oc video about it. I wish the bests for ya!
@@adaxgreat5721 ruclips.net/video/HS2BbRKZuLc/видео.html a step a head of you. Thanks
Tankyou
You are welcome, Thanks for watching and the comment.
4:53
Thanks for watching and the comment.