Bhai 1000- 2000 hajar ka toh bottom bracket aaata hai 😂😂baur crank set 3000 ke upare he melega 5000 ka hai total 8000 hajar but india meh crankset ka option nahi hai to kaha se layega😂😂
Simply to declutter. Most of the times you will just need a really low gear a really high one and a middle one. With 3x there is alot of clutter in the cockpit and most of the times it is unnecessary so converting a one by is a good idea. Less cranks less cockpit clutter. More simplicity , however converting a 1x8 doesn't make much sense to me i wouldn't untill unless it's a 1x9 minimum.
Super brother, just becoz of FD I was planning to sell my firefox rapide. Pls suggest if this change will work on that too so I can spend money on these products?
I want to replace bottom bracket of my rockrider 340 with a smoother one. I guess the smoothness wanted will be achieved by its replacement. Can you suggest something?
Hello Roy, I've a Riverside 500 can you please tell if a Shimano alivio 3 by crankset with hollowtech 2 bottom bracket can be installed in the bike after taking out the stock crankset if it can be done, which is the exact bottom bracket size suitable for the rs500 ? Since I'm slightly handicapped with cerebral palsy my efficiency is kind of low on gradients and long hours in the saddle so to ease up things I thought of upgrading to a lighter 3by hollowtech 2 chainring.
Nice video but 1x setup be more efficient than 3x setup on hill climbs and long rides like 100kms or so ? I am sure for decent the would be better. Would appreciate your reply. Thanks
1x and 2x are both good. It really depends on what type of terrain you are riding and how strong your legs are. 2x in general you will have a wider range which which will help with a terrain with lots of climbs. But you can get a good range with a 1x if you run a set up with a chainring 32 or 34 which I am using right now and adding a 42T to your cassette which I'll be doing next upgrade to the bike.
Hey there! I am thinking of a simillar conversation but i have doubts about gearing ratio my bike goes upto 55km/hr on current setup it's 42t max at front & 11t lowest at behind. I will definitely lose a little top speed but i wanted to ask if the first gear feels simillar to old 1 in front and 4 at behind or lower on same cassette? If it's simillar to that i will upgrade to hollow tech single speed or else go for a 22-44t crank Please reply i would really appreciate it.
Mr. Roy, I am subscriber of your RUclips channel. It's very informative, inspiring and motivating. I value your expertise and experience par excellence. I have a Btwin tilt 120 folding bike with 1x6 gears. Can it be converted to 3x6 without affecting it's city ride adversely and making its uphill ride more comfortable or it would be better to convert it into 1x8 or, if possible, to 1x10 ? Please give yours expert opinion about its feasibility and advisability. 😊 Regards.
@@Films_by_vinal single speed crankset were designed primarily for enduro riding by SRAM. The main idea was to make gear shifting easy & reduction of weight. Shimano too offers the same in their highest components. The more traditional 3 speed crankset is good for every other purpose. The former is expensive and the latter is cheaper as it has been used for decades.
Sir, why it is necessary to convert higher gear crank to Lower gear crank as you did here from 3 by to 1 by crank set? Simply what's the benefits of 1x crank over 3x crank
I need to move from no gear to🔥 gear have been riding for last 3 months and done 2k kms shall I go with the set up you recommend also recommend an MTB for me with the configuration.
@@anuragrathore2493 I would highly recommend you to go for the btwin rockrider 520 there's no other brand in this budget that can provide you with sram components under 30k
Sir....! Main aap ko bola tha normal cycle Mein crankset kaise install kare! Sir ! any bicycle me Install kar sakte hain??? Or waise bhi mere paas woh wala crankset nahi hai aur mere cycle maybe Woh crankset nahi lagega !!
I'm using 1*9 setup.. But when i put my gear to the lower one it sounds like hell.. The chain bands.. Do i need a flexible type of chain (if there's any) to solve the problem?
Bhai main abhi bohot chota hu kisi ki galati batane k liye, aap mehnat karte raho, ek din jarur success aapke pass ayegi. Videos bnate raho chahe response ho ya na ho. Ek din khud sab thik hoga.
Hi @cycleriderroy. After making the changes. Don't you face the chain dropping problem? I am trying to upgrade my 3x7 to 1x7. The local mechanics are suggesting not to do as it may cause chain dropping problems. Any suggestions?
If turn 3x to 1x crankset how gears can shift without making noice..? Usually will follow 1:3, 2:5, 3:7..in this case gears will making noice if I make any wrong combination...my question is how 1x can manage entire gears? MY bike is Montra Madrock and can i upgrade to 1x?
@@cycleriderroy I never really had any complaint with my 6-speed bike, but used to get complex looking at 21 gears and fancy derailleurs, , but now my mind is at peace after seeing this video, have discarded the thoughts of going for a new bicycle. :)
Can you give the links of the components you used in this video... Thank a lot.
2500 hai hi nahi... Dega toh gaali sunega
Last me bola tha dega par nahi diya, 2500 nahi hoga clickbait sabhi karte he, par yaha bait nahi hua informative tha
Bhai 1000- 2000 hajar ka toh bottom bracket aaata hai 😂😂baur crank set 3000 ke upare he melega 5000 ka hai total 8000 hajar but india meh crankset ka option nahi hai to kaha se layega😂😂
Hello Roy, nice video. But please explain why u removed 3 gare and fitted 1. What is the use and how it helps for a raid ?
Simplicity and weight are the most common answers
Bro sifting karne main achani hoti hain
Simply to declutter. Most of the times you will just need a really low gear a really high one and a middle one. With 3x there is alot of clutter in the cockpit and most of the times it is unnecessary so converting a one by is a good idea. Less cranks less cockpit clutter. More simplicity , however converting a 1x8 doesn't make much sense to me i wouldn't untill unless it's a 1x9 minimum.
@Abhishek Chhillar no it just help u In climbing unless ur sprocket teeth should be decrease or chainring should increase
Simply, the 3x cranksets have older technology, while the new 1x hollow bottom bracket is more advanced in technology.
Hey, I was thinking to just use the smallest crank( mine is modular). Would that work?
Hey man great video! Can you recommend a good one-by mtb for a beginner?
Marin San Quentin
@@cycleriderroy Can I upgrade my 3*7 tata contino to 1*10...or even more???please reply
And will it affect riding experience adversely??
@@cycleriderroy bhai iska link nhi diya apne is 😓
Rockrider st120
Super brother, just becoz of FD I was planning to sell my firefox rapide. Pls suggest if this change will work on that too so I can spend money on these products?
आपका चैनल सबसे best
I'm planning to buy a gt avalanche.. they offer 2*9 and 3*8 drivetrains.. which one should I go for?? Please suggest..
Sir,plzzzzzzzz answer ...Is is worth to convert 21speed to 1*8,9or 10 ....if then provide links to buy it...
Yes, I’d go 1x 9 or righer
Vishu sir why you or another people change front crankset ,l mean 1×3 to 1×1 please give me reply, is this helpful ? Iss se chain tedi nahi hoti?
Super nice like to banti hai
Share bhi Karo sir
I want to replace bottom bracket of my rockrider 340 with a smoother one. I guess the smoothness wanted will be achieved by its replacement. Can you suggest something?
Hii i have made a video on the same check it out on mtb rider mdt
That's good no front derailleur but wheelie are worke in this system
Yes it will work
Please suggest a cheap and best Pump for MTB
Khub bhalo hoyeche it's so easy to change thanks for the amazing vedio.😊
Where is the buying link bro?
Hi Roy. How much will be the expenditure to convert 3x 8 to 1x10 drive train.
Thanks
I have a 1x10 drivetrain. Complete drivetrain available from Crankset to rear gears for 15K
@@cycleriderroy..
Brother, i have cardiac xc900 just buy, install 1x10 drivetrain possible?
Please reply 😊
Hello Roy, I've a Riverside 500 can you please tell if a Shimano alivio 3 by crankset with hollowtech 2 bottom bracket can be installed in the bike after taking out the stock crankset if it can be done, which is the exact bottom bracket size suitable for the rs500 ? Since I'm slightly handicapped with cerebral palsy my efficiency is kind of low on gradients and long hours in the saddle so to ease up things I thought of upgrading to a lighter 3by hollowtech 2 chainring.
Kya ye kaam karega sabhi cycles par? Bta dete yha h video.......khub bhalo
Sir kya yeah firefox me lag sakta h yeah? Please reply❤
देखने में मन को मजा आ जाता है
What about cross chaining ? Doesn't this setup cause cross chaining ?
What is the advantage of hollow crankset?
Is this crank set Compatible with 7 speed freewheel system?
It's not worth.... you're gear ratio will dramatically decrease....... upgrade to 11-40 atleast
Hi roy...
pls explan me benefits of 1* 10 setup.
Yes, would love to hear the performance reviews
Hello Sir... Apke Es Video Mae Jo Apka Cycle Wo Kitna Inches Kai Hai???
26t ,22t , 32t
it make the bike look even more simpler
Wait for the next upgrade video, it will make the bike look more expensive and can handle all terrains
I think it ll reduce the wide gear ratio???? Will it?
Bro which one is the best for 10speed 1x front crank 26t 28t 30t ???
Nice video but 1x setup be more efficient than 3x setup on hill climbs and long rides like 100kms or so ? I am sure for decent the would be better. Would appreciate your reply. Thanks
1x and 2x are both good. It really depends on what type of terrain you are riding and how strong your legs are. 2x in general you will have a wider range which which will help with a terrain with lots of climbs. But you can get a good range with a 1x if you run a set up with a chainring 32 or 34 which I am using right now and adding a 42T to your cassette which I'll be doing next upgrade to the bike.
Hey there!
I am thinking of a simillar conversation but i have doubts about gearing ratio my bike goes upto 55km/hr on current setup it's 42t max at front & 11t lowest at behind. I will definitely lose a little top speed but i wanted to ask if the first gear feels simillar to old 1 in front and 4 at behind or lower on same cassette?
If it's simillar to that i will upgrade to hollow tech single speed or else go for a 22-44t crank
Please reply i would really appreciate it.
No reply Oof
Bhaia apnki crankset ki model konsa hain... I want to buy the same model like this one..
Do we need to change the cassette while putting on the new crankset
No
Thank you
Brother koi cheaper crankset nhi h....I want to convert my 7x3 to 7x1
Mr. Roy,
I am subscriber of your RUclips channel. It's very informative, inspiring and motivating.
I value your expertise and experience par excellence.
I have a Btwin tilt 120 folding bike with 1x6 gears. Can it be converted to 3x6 without affecting it's city ride adversely and making its uphill ride more comfortable or it would be better to convert it into 1x8 or, if possible, to 1x10 ?
Please give yours expert opinion about its feasibility and advisability.
😊
Regards.
Which is better 1×8 or 3×8 ?
@@Films_by_vinal 1x8 with crankset and cassette of good ratios of teeths
@@Films_by_vinal single speed crankset were designed primarily for enduro riding by SRAM. The main idea was to make gear shifting easy & reduction of weight. Shimano too offers the same in their highest components. The more traditional 3 speed crankset is good for every other purpose. The former is expensive and the latter is cheaper as it has been used for decades.
Seems interesting and I just want to upgrade my montra metal. Yo. Thank bhaiya . Helo me out please
Hi.. Bro... Merepass bitwin Rockrider 520 he to...8/3 set up so. Usako hollotek laga sakate he
Suppose if we change 3x into 1x.....is there chance of derailed ???
hi...can I upgrade 3X7 tourney to 1x10 or 1X11 or 1X12 in my cradiac discover hybrid cycle?
Sir, why it is necessary to convert higher gear crank to Lower gear crank as you did here from 3 by to 1 by crank set? Simply what's the benefits of 1x crank over 3x crank
Simple, more power, no more gear tension,
Hello sir.. kya ham is crankset ko simple cycle me install kr skte h?
Octane springbok or btwin rockrider 340 which is good or best
Bro any that type of crankset in cheap budget fast reply
Brother can u tell me how to convert real wheel to single speed drive... And links of products necessary.... Plz
Why would you do so 🤔
I need to move from no gear to🔥 gear have been riding for last 3 months and done 2k kms shall I go with the set up you recommend also recommend an MTB for me with the configuration.
Budget??
@@rekhadevigupta6282 30 k
@@anuragrathore2493 I would highly recommend you to go for the btwin rockrider 520 there's no other brand in this budget that can provide you with sram components under 30k
Hey bro make a video of best MTV cycle in india
Traid X4 ko Change karna Hai To Usko Konsa best Set Hoga 3x Speed ko 1x speed karna Hai Link share Me Please
Bhai ekta bhalo front light suggest korun na 2000 rs er madhe. Plz
Sure bhai
@@cycleriderroy bohut confused acche .
How many total coast you need ??????
Are you going to upgrade from 1×8 to 1×9/12 ? If yes then plz make a video I also want to upgrade from 8 speed to 9 speed cassette
Yes I shall be doing that
Sir....! Main aap ko bola tha normal cycle Mein crankset kaise install kare! Sir ! any bicycle me Install kar sakte hain??? Or waise bhi mere paas woh wala crankset nahi hai aur mere cycle maybe Woh crankset nahi lagega !!
Steps same hai, normal bike mein normal Wala crankset lga skte ho. Bas size pta hona chahiye
Can you make video on 1×7 to 3×7
Pls explain what's the benefits of this setup (3X8 vs 1X8) ?? We are getting less gear ratios - rt ??
Sure I'll explain that with a video
@@cycleriderroy thanks
Can u use a hollow tech set up with three front gears ?
No
Bro nice video . I'm going to buy a MTB tomorrow (sunday) my budget is 20000 which is the best cycle please reply bro ? Important
I have made a video on this topic do watch.
Bro i bought Raleigh Conan.
@@jeya755 good choice
I bought it for 26000
bro how much it cost.plz tell me.btw love your videos from BANGLADESH
Sir it was really amazing..but the problem is that ..8 gear set is tourney so will it be compatible?
Yes
Hi Roy sir, can upgrade firefox road runner pro v, from 3 set crank set to single crank set
Yes bro check out mtb rider mdt
is it upgrade or down grade...
Next video review on crankset which one will be better 1x or 2x for MTB..
Whuch is you bike model mate?
Bro what your view on 1×7
What groupset drivetrain are you using
Why did you changed your bikes rear derailleur from acera to altus
Bro is it a problem if I use 1 gear front and 8 gear at rear
Broo please share the link to buy this
Best upgrade
Wait for the next video
Plz make a veadio how to install a chain component
Already done
Make a video like Fabio wibber
LOL
3×8 vs 1×8 crankset difrens kya he ispar video banao sir single speed freewheel crankset use kare to kya kya problem hota he ispar video banao sir
How much did your crankset cost???
I want to upgrade polygon cascade 4 but don't know the bb type? is Shimano hollowtech compatible or not? I want to upgrade 1x11 shimano deore
compatible
@@cycleriderroy where can I purchase the components online?
Sir.. it is not available in discription i want to upgrade my bike ...
Hi cycle rider Roy! Couldn't find any links you promised to provide in the video.
They are in the description
I'm using 1*9 setup.. But when i put my gear to the lower one it sounds like hell.. The chain bands.. Do i need a flexible type of chain (if there's any) to solve the problem?
No there is no flexible type chain, try getting a Shadow clutch derailleur or a Chain guide.
Did you have to change the chain?
No, you don't need to, just measure it after installation and cut extra links
Why u removed friction free wheel and added this...?
Hello bhi
My cycle is atlas ultimate so i want to make gear like 1*7speed. Can make like your
Which is better-
1x/2x/3x
1x is better
1x
Can I upgrade my 3*7 tata contino to 1*10...or even more???
Yes
In some videos u giving links but its showing unavailable in amazon
Where i can buy this crankset?.... same as u r having
Can this conversion be done in my btwin riverside 500?
Yes
Bhai tu ek custom bike Bana le tujhe itni knowledge hai!!!!👏👏👏👏👏👏👏👏👏
Wahin to bann Rahi h dost
Sir amazing video ...sir. I have a 50teeth 10 speed cassette ..can give at great price if wanna use it fr video ...thnnx
I have got myself a full set buddy but thanks for the offer.
Please make a new video on top 10 best bike under 10000 in india please request to you
Yaar bhai, AAP apni videos kaise chlate ho? Mai bhi videos bnata hoon .....kya AAP zyada tags use krte ho? Plzzzzz meri videos dekhkr meri gltibta do
Bhai main abhi bohot chota hu kisi ki galati batane k liye, aap mehnat karte raho, ek din jarur success aapke pass ayegi. Videos bnate raho chahe response ho ya na ho. Ek din khud sab thik hoga.
Hi @cycleriderroy. After making the changes. Don't you face the chain dropping problem? I am trying to upgrade my 3x7 to 1x7. The local mechanics are suggesting not to do as it may cause chain dropping problems.
Any suggestions?
SEE THE CRANK HAS WIDER TOOTH AND NARROWER TOOTH WHIS WILL PREVENT THE CHAIN FROM FALLING AND YOU CAN ALSO USE CHAIN GUIDE
Or you can reduce chain links as well
@@vikashvkk hii i also have a cycling platform on RUclips would you like to check it out
@@vikashvkk chain link reduce karne pe derrailuer pe pressure parega
Use a narrow wide chain ring
machcity munich vs hero octane zephyr which one to purchase ???
Munich better
Hi is it best to change 3 speed crank to 1 speed crank tell me
yes
okay thank you dude
Hello sir iam a very big fan.pls review a hilly bycycle .pls a reqest a fan.
Sure I'll try
Superb video like please😉
If turn 3x to 1x crankset how gears can shift without making noice..? Usually will follow 1:3, 2:5, 3:7..in this case gears will making noice if I make any wrong combination...my question is how 1x can manage entire gears? MY bike is Montra Madrock and can i upgrade to 1x?
Yes you can, no noise
Its very complicated. :)
What is cost of this cycle
New front suspension ka video banao
Sure Bhai try karta hu, good Suspension thode mehenge aate hai to jese he Paisa save hoga lelenge or video bnayenge.
@@cycleriderroy OK bahiya
Very nice 👍👍👍👍👍👌👌👌👌
Amazing bhaiya
Thanks
So N-I-C-E and keep it up bro
Thanks
Can we set this in Hercules Rodeo Turner
Yes
What is the benifit of converting 8 by 3 into 8 by 1
Simple, clean, clutterless bike with more gearing ratio and makes your bike look more Expensive
@@cycleriderroy Not somebody liked your comment..I liked your comment😜😜😜
@@cycleriderroy I never really had any complaint with my 6-speed bike, but used to get complex looking at 21 gears and fancy derailleurs, , but now my mind is at peace after seeing this video, have discarded the thoughts of going for a new bicycle. :)