Good job guys! I’ve had to do window glass replacement on several old Fords and I don’t miss it. It did bring a happy tear 🥲 to my eyes to see new rubber and glass on the ‘96! Can’t wait for more videos!B⚡️D
I have a 95 XLT and did all the seals when I first got her. I polished the scratches out of my glass, wasn't fun but saved money. Love watching your videos, keep them coming!
I’m surprised you didn’t mention the elephant in the room - when those seals breakdown moisture drops down and rusts the bottom of the tailgate … but great video!
Hey Brad, for your next episode you and Sam need to have a boxing match! You're going to have to teach ole Sam a little respect , Dude doesn't seem to wanna give you full credit for your hard work lol. I think you did a fine job cleaning off the tailgate. 🤟
I’m looking at picking up a 96 bronco XLT this week, in pretty rough condition. You guys have gave me a ton of inspiration for resto mods, excited to see where this one goes.
We are absolutely not mechanics. We are RUclipsrs that do car and truck stuff. Most mechanics can’t make videos and most RUclipsrs aren’t real mechanics.
First, great instructions on your videos and thank you for helping us work on our own vehicles!! Could you please add the parts you used so we can order the same kit/parts. Thank you.
Correct way to remove glass is to take side plugs or seals. They twist out. Also need to remove regulator and clean and dry lubricate. Regulator can snap and hurt you bad. Need to put bolt or screwdriver in holes when glass weight is not on it. Total rebuild of tailgate was one of the most frustrating and expensive things I ran into besides stroking motor to 331.
That run seal on the upper part of the tail gate, do i have to order those clips? I recently ordered that run seal for my 93 EB Bronco and was going to replace it but didnt come with any clips i see the small holes on them where the clips go into. But dont got no clips. Would i be able to re use the ones thats already there?
You guys should of pulled that glass out and had the inside painted too. Its sucks to have a new paint job then see some rust on the inside of the tail gate. To me that a half ass restore.
Looks like a pain in the ass. We’ll see what my 86 has in store for me this spring. Can’t wait. Great video guys, the detail is appreciated
Great job, slowly but surely the Juice is getting a makeover!
Good job guys! I’ve had to do window glass replacement on several old Fords and I don’t miss it. It did bring a happy tear 🥲 to my eyes to see new rubber and glass on the ‘96! Can’t wait for more videos!B⚡️D
Another awesome video brought to you by Backroad Driver.
I have a 95 XLT and did all the seals when I first got her. I polished the scratches out of my glass, wasn't fun but saved money. Love watching your videos, keep them coming!
What did you use to polish the scratches out?
GREAT JOB BOY'S..!!!! THANK YOU FOR ALL OF YOUR GREAT VIDEOS ...!!!!!!!!!! DOUBLE G. HERE...!!!!
That was a fun time
Dang, I feel dumb now. When I worked on my 96 Bronco's back glass I hot wired the pigtail to get the window out with the tailgate down. 👍
Try soapy water the next time you are installing rubber seals i think you will find it much easier. Enjoy all the videos you guys do.
Thanks Duane!
I’m in the middle of redoing a 1993 myself. You guys videos have really helped me out.
Thanks for watching Jim!
I believe that 93 is in that same generation
Nice job guys. And that is coming from the glazer
This is fantastic, I have a '96 as well that was my father's. Looking forward to fixing a few things on it including the tailgate.
I’m surprised you didn’t mention the elephant in the room - when those seals breakdown moisture drops down and rusts the bottom of the tailgate … but great video!
Nice video guys
Hey Brad, for your next episode you and Sam need to have a boxing match! You're going to have to teach ole Sam a little respect , Dude doesn't seem to wanna give you full credit for your hard work lol. I think you did a fine job cleaning off the tailgate. 🤟
I’m the janitor!
I need to do the same glass and seal.
Electric tape and heat shrink tape is good. Thought you might use a hammer to get glass out lol nice job. I like the red car in background
I’m looking at picking up a 96 bronco XLT this week, in pretty rough condition. You guys have gave me a ton of inspiration for resto mods, excited to see where this one goes.
We have a killer exterior upgrades video coming in 7-10 days…
@@BackroadDriver looking forward to it! Subbed and have notifications on
New bumpers and a whole lot of black out!
Lol you guys have some real clean hands for being so called mechanics
We are absolutely not mechanics. We are RUclipsrs that do car and truck stuff. Most mechanics can’t make videos and most RUclipsrs aren’t real mechanics.
First, great instructions on your videos and thank you for helping us work on our own vehicles!! Could you please add the parts you used so we can order the same kit/parts. Thank you.
Will do. Forgot about that.
Please upload a video when you repair the tailgate switch!!! I have the same problem with my bronco and wanna know how to repair it. Thankss
Golden
Correct way to remove glass is to take side plugs or seals. They twist out. Also need to remove regulator and clean and dry lubricate. Regulator can snap and hurt you bad. Need to put bolt or screwdriver in holes when glass weight is not on it. Total rebuild of tailgate was one of the most frustrating and expensive things I ran into besides stroking motor to 331.
Any tips for replacing the felts while leaving the glass in the tailgate?
Do you need to remove the tailgate glass to replace the seal?
My motor goes up and down, but at a crooked angle, gotta get new gaskets, rubbers, and grease the track, see why the window goes up crooked
As the mechanism binds up sometimes the regulator can skip a tooth.
That run seal on the upper part of the tail gate, do i have to order those clips? I recently ordered that run seal for my 93 EB Bronco and was going to replace it but didnt come with any clips i see the small holes on them where the clips go into. But dont got no clips. Would i be able to re use the ones thats already there?
does the back window glass have to fully come out to replace the outer weather seal?
no
Any recommendations on where you guys get your window seals and parts from on this rebuild?
broncograveyard.com ebay might have some things as well but the guys at bronco graveyard have been awesome and have good products.
@ thanks
Are these lights compatible with my 82 bullnose bronco ?
Do you have to pull the glass to change the window sweeps? I just picked up an 95 that needs the sweeps bad.
no
Do you need to remove the glass to put the new window seal in?
Also would like to know.
Where to purchase all the rubber and seals
It's all listed with links in the description of the video.
Bronco Graveyard
😊👍🌹
You guys should of pulled that glass out and had the inside painted too. Its sucks to have a new paint job then see some rust on the inside of the tail gate. To me that a half ass restore.
You guys cut a lot of corners shit I wish you guys didn't do that cus it sucks you teaching people it's okay to do so