HOW TO MAKE A BASIC FIBREGLASS MOULD: PART 1 | EPFX

In this tutorial, I am going to demonstrate how to make a two part fibreglass mould. I am moulding a sculpt which will be used for a character transformation. See below for a list of products!
Products I use:
Chavant Clay to sculpt: amzn.to/3LytTpz
Macwax Release spray: amzn.to/3ZXberU
Fibreglass Kits: amzn.to/3LxyOXK
Brushes: amzn.to/3JnOsT3
When fibreglassing, please ensure you do it in a room which is well ventilated! Always wear the correct PPE mentioned in the video.
Mask: amzn.to/3ToNn1E
Overalls: amzn.to/3mWCZ5f
Gloves: amzn.to/3ZYLJX2
Thank you for watching my tutorial, I hope it is helpful!
See part 2 for how to add in bolt holes, and open the mould.
My social media:
Email: [e-mail]
Facebook: emmiephilpmua/
Website: emmiephilpfx.wixsite.com/epfx
Instagram: @emmiephilpfx

[@epfx4181]

Hi everyone, thanks for letting me know about the music. I am not able to change/don't know how to edit it as this was made on iMovie a long time ago. I will be sure to not make this mistake again, thank you.
Please be kind.

[@lisasmith9311]

My dad made fiberglass statues
www.amazon.com/dp/B097RCZSD4/ref=sr_1_1?dchild=1&keywords=The+man+behind+the+mufflerman&qid=1624514842&sr=8-1

[@zacmac]

there are unforgivable mistakes! ;)

[@noire1001]

I never knew a gel coat product existed, this changes everything! I have been wanting to make a 1:3 scale silicone body for a Smartdoll for ages, but couldn't get my head around how fiberglass would work as it wouldn't capture the details. Very helpful video, thanks!

[@DaLavenderhillMob]

Hi firstly i want to say thank you for taking the time to make this video. It's really helpful. You have a great voice and come across like a good teacher. I cant handle the "feel good music" I think your channel will be way more impacting and successful without it. Much love ❤️

[@trash_in_a_box]

Almost blew my brains out listening to the music that many times...

[@tomthumb6269]

Great track

[@JOEGGGJOE]

I recommend you mixing a resin slurry (peanut butter) with talc or any other filler. It will avoid any air gaps, pockets, & bubbles. That part has a lot of deep grooves. Put a good coat after the gel coat, making the surface flat. Then fiberglass.

[@toddlehman928]

Absolutely. I use cabosil, 1/64" milled fibers and ceramic powder to make my paste. The fibers ensure strength and the ceramic ensures a good cosmetic profile

[@user-wh6gf1eb9w]

What brand of gelcoat are you using for the fiberglass ?

[@thegyrochild3585]

What is the difference between the gel coat and the resin??

[@shaunwaaa]

This video is amazing ! lovely description and demonstration, I will share with all my fiberglass buddies, please use this music in all your videos in the future !! just to annoy people.

[@leninthomas7708]

Very very nice 👌 super congrats 💐💐💐

[@KOllectivebykellyodell]

so so useful

[@martindwm]

Thanks!

[@richardsmith9509]

Will resin or epoxy stick to plastic handy wrap ??? [ saran wrap} ?????

[@SteveK139]

Great video

[@KOllectivebykellyodell]

fantastic

[@robertdewar1752]

I am making a male mould for a CF telescope tube. The mould will be made of wood. What is the best way to prepare the mould so the part will release?

[@JOEGGGJOE]

Seal it with either a resin or varnish first, then put PVA (poly vinyl alcohol).

[@robertdewar1752]

Thanks Joe. Going down a different route now though.

[@ruwansampath8694]

thank u verry much 😊

[@chandrashekhardeshmukh4887]

very nice

[@louisemurphy5580]

I prefer to tear the resin because cutting it gives the pieces sharp edges

[@charlotteriddle7303]

Great video, the music is too loud though. You should re edit and remove the music or keep the voice over audio at the same level and make the cheap rock and roll music much lower.

[@lemmetellyousomething679]

❤️👍

[@chandrashekhardeshmukh4887]

pl send matreal list for this molding and all materials name aslo glass fiber which type use glass fiber name

[@pinkyhotmessx69]

She literally posted all this info in the video

[@santukb7910]

Thanksa and do collar mold I am from india

[@Carlos_RodriguesS2]

Hi, what's the material of the mould??? It's clay???

[@epfx4181]

The orange stuff is NSP chavant clay in medium, sculpted on top of a face cast (which is also fibreglass, to make the two part mould)

[@Carlos_RodriguesS2]

@@epfx4181 thanks, i love composites

[@fransjelangedijk5483]

​@@epfx4181 how did you get the face cast? What are the steps you took before this video?

[@kiondre663]

Can I do the same to make body molds

[@ruwansampath8694]

thank u verry much.😊🙏

[@arshadkhan5658]

U don't ues Gardner🤔

[@thecrazyboy4215]

suggestion: lower music volume if you use a single song

[@justus8663]

I don’t see anything wrong with the music 😂

[@SteveK139]

Use a mask...your breathing in to many chemicals

[@justus8663]

SteveK139 what? 😂

[@shurpasiganchannel4751]

From super lolo

[@Penfold8]

Here's an idea. Why don't you put the fiberglass on the mask and then put the resin on top? The resin is going to soak the fiberglass anyway and it keeps your area just a little cleaner

[@ziadishere1552]

This idea is not preferable

[@Dev1nci]

@@ziadishere1552 HAHAHAHA this comment needs some love XD

[@54321Judith]

Thanks for the info, but your music was really irritating

[@edwardberrocal7266]

music seriously destroys this video. Almost have to mute the whole clip.

[@doesntmatter3068]

Why do ppl think music while doing video is good/cool????????????
Well , IT NOT!!

[@justus8663]

My brain just lost cells while reading that sentence

[@doesntmatter3068]

@@justus8663
Dam, I feel sorry for ya, Now your even MORE stupid!

[@justus8663]

Steve Miller first-
It’s not dam-
Second it’s you’re
Your is like that’s your ball
You’re is you are
It’s a common mistake people make so it’s not just you

[@shaunwaaa]

I think this music is cool ! And would recommend using for all the video's, just to annoy the trolls !

[@humblehombre9904]

Dear lord kill this stunningly stupid music loop!!

[@Rob-fn1kp]

the gel coat is'nt listed in the products?