Awesome news Aldryn and thanks!! I had just checked the DJI forum and they hadn't posted any news about the new firmware until after I watched your video. These are indeed features that I and many others have been asking for on the Air 3 and in my opinion, puts it right back in contention of one of the best in the DJI lineup. Of course thats dependent on what you need out of a drone too. Great work Aldyn and thanks for all your hard work!!
Thanks for showing us all the new features that the new firmware update brought to the Air 3. This was a very impressive update. Great video, and thanks for sharing.
Is the rcn2 controller just as good as the controller you are using .as far as range distance. I heard they added 4 antennas is that 4 I to the drone itself I heard 2 receive antennas and to for transmission
❤ Wondering why no one is commenting on the fly app addition of Smartshots settings? Seems pretty important, but not enough for DJI to release any instructions.
So I shoot in the ocean and on my mavic 3 I cannot take off when moving up and down from waves. Minor waves ok, but just slightly rough, the blades activate but it will not lift off. DJI was no help. Any ideas? This wasn’t an issue with mavic 2
Nothing was mentioned about the smart shot settings in the Control page of the controller; seems to be very little that I can find regarding these settings
I'd have really loved to see a "Clean HDMI out" in the update. The RC pro and smart controller does support either the mini 4 and Air 3 so there is no way to get a clean HDMI out on this drones.
Aldryn, thank you for your excellent overview and testing of the new firmware updates on the Air 3. Your explanations on each update were very well presented and easy to follow. I'm updating the firmware as I'm watching your review. The digital photo zoom is a massive upgrade along with the visual sensor views. As always, thank you for your excellent presentations.
This is the first video of yours that has been recommended to me and I just have to say how impressed I am with your approach! It's just perfect! Thank you for the content and delivery. Well done! New sub and will recommend relentlessly
Good morning Aldryn, and thank you for the video, it has been the most clear one regarding the new firmware. I am new to the AIR 3 (upgrade from Mavic Air 2.) Regarding the downward sensors, when I change that setting does it turn off just the downward sensors or does it turn off the lateral/front/back ones? I am a little bit confused with this. Thank you.
Is the vision assist available for use with the goggles 3? If not, do you think they will make the work at some point? I love flying with goggles but having the vision assist would be a great safety addition. Let me know what you think?
Love your videos sir! Quick question - is it true we have to update all batteries as part of this update? Sorry for asking this if I missed it in your video. thanks so much!
Do you think Active Track 360 will come to the Mavic 3 Pro eventually too? Pretty bummed they added all the same features to the recent update except for that one.
Yeah, that’s not really fair to Mavic 3 Pro customers, especially being that you paid so much more for that drone. It’s suppose to be the “flagship” drone. So I would expect it to have every newest feature available. Especially because it’s not a very old drone at all. I would be a little irritated if I paid all that money for a drone, only for a newer drone to come out, that’s much cheaper, and has a lot more features.
Hello sir ive updated my air 3 after i watch your video OMG i was so nervous it take 13 minutes hopefuly its done succesful .Thank you so much its so very helpful to me as a bigenner, Tanx and GOBD BLESS
Do vision sensors work only after take off, my new DJI air 3 is saying vision sensors unavailable, since I have no propellers now so can't test it , can u guys help me out ??
Awesome news Aldryn and thanks!! I had just checked the DJI forum and they hadn't posted any news about the new firmware until after I watched your video. These are indeed features that I and many others have been asking for on the Air 3 and in my opinion, puts it right back in contention of one of the best in the DJI lineup. Of course thats dependent on what you need out of a drone too. Great work Aldyn and thanks for all your hard work!!
Thanks for sharing
Thanks for showing us all the new features that the new firmware update brought to the Air 3. This was a very impressive update. Great video, and thanks for sharing.
Is the rcn2 controller just as good as the controller you are using .as far as range distance. I heard they added 4 antennas is that 4 I to the drone itself I heard 2 receive antennas and to for transmission
❤ Wondering why no one is commenting on the fly app addition of Smartshots settings? Seems pretty important, but not enough for DJI to release any instructions.
So I shoot in the ocean and on my mavic 3 I cannot take off when moving up and down from waves. Minor waves ok, but just slightly rough, the blades activate but it will not lift off. DJI was no help. Any ideas? This wasn’t an issue with mavic 2
Thanks Aldryn from Dominican Republic, you are always a master on this matter. I just learned with you how to take advantage of all this new updates.
Nothing was mentioned about the smart shot settings in the Control page of the controller; seems to be very little that I can find regarding these settings
Thx, Aldryn for going over the new updates for the Air 3
Would you recommend the air 3 over the original mavic 3?
I'd have really loved to see a "Clean HDMI out" in the update. The RC pro and smart controller does support either the mini 4 and Air 3 so there is no way to get a clean HDMI out on this drones.
Aldryn, thank you for your excellent overview and testing of the new firmware updates on the Air 3. Your explanations on each update were very well presented and easy to follow. I'm updating the firmware as I'm watching your review. The digital photo zoom is a massive upgrade along with the visual sensor views. As always, thank you for your excellent presentations.
I wonder why they didn’t make the photo zoom 48 megapixels. Why did they limit it to 12?
Because after 12x it switches to telescopic lense.
I wonder if some of these updates will come to the mavic 3 pro? Sorta like the ui version of the follow me / active tracking setup this has.
Thanks Aldryn, Always Fantastic Information and Videos.
Happy Holidays and Happy Flying! Q
U too Paul
The air 3 needs explorer mode that is in the 3 pro. So you don't have to stop your video the change cameras
Can’t you change cameras with the c1 or c2 buttons?
Good tutorial with all the new features Aldryn.
that's why i love dji
Thanks I appreciate your tech updates
It's great to see the newest firmware updates on the DJI AIR 3, I will update mine soon. Thanks for such a great informative video!
Just got my dji mini 4 Pro, had it a week, how do I do the firmware updates?
Thank you for this interesting video,👍👍👍🙏🙏
This is the first video of yours that has been recommended to me and I just have to say how impressed I am with your approach! It's just perfect! Thank you for the content and delivery. Well done! New sub and will recommend relentlessly
🙏🙏🙏🙏
Good morning Aldryn, and thank you for the video, it has been the most clear one regarding the new firmware. I am new to the AIR 3 (upgrade from Mavic Air 2.) Regarding the downward sensors, when I change that setting does it turn off just the downward sensors or does it turn off the lateral/front/back ones? I am a little bit confused with this. Thank you.
Thanks for this review of the updates. 1 question. I don't own an RC1 or RC2, are the screen recordings always so choppy?
I haven’t really noticed them being that bad but I just it as reference
Is the vision assist available for use with the goggles 3? If not, do you think they will make the work at some point? I love flying with goggles but having the vision assist would be a great safety addition. Let me know what you think?
Love your videos sir! Quick question - is it true we have to update all batteries as part of this update? Sorry for asking this if I missed it in your video. thanks so much!
Great video explaining the new updated. Merry Christmas!
Vision Assist is a great idea. Thanks for the excellent, informative video!
Looks like you're near Chula Vista? Ever been told that you can't fly your drone in the parks there?
North county Black Mountain ranch park. There's an RC park here.
@@FlytPath Thanks for the tip!!
Are you able to access the telescopic lense (3x) with the DJI motion 2 controller?
Do you think Active Track 360 will come to the Mavic 3 Pro eventually too? Pretty bummed they added all the same features to the recent update except for that one.
Yeah, that’s not really fair to Mavic 3 Pro customers, especially being that you paid so much more for that drone. It’s suppose to be the “flagship” drone. So I would expect it to have every newest feature available. Especially because it’s not a very old drone at all. I would be a little irritated if I paid all that money for a drone, only for a newer drone to come out, that’s much cheaper, and has a lot more features.
I’d assume so
Greetings from California Aldryn
Thanks for the update for showing us the new features of my dji air 3 im very thankful to your Greatest video
Hello sir ive updated my air 3 after i watch your video OMG i was so nervous it take 13 minutes hopefuly its done succesful .Thank you so much its so very helpful to me as a bigenner, Tanx and GOBD BLESS
Awesome. Is hard to fly your drone in the winter?
🎉first🎉
Air 3 all the way..from the philippines..
Thanks for another awesome review bro.
Np
Quick question, after the update I can't still get access to the vision assist for air 3. I'm based in the UK so I don't know if is any difference
Why the auto active in chinese? Did you notice it?
Do vision sensors work only after take off, my new DJI air 3 is saying vision sensors unavailable, since I have no propellers now so can't test it , can u guys help me out ??
Seems like its stuttering when using activetrack auto. Is it caused by the screen recording function
Why is the video from the air3 jittering ?
Any particular time codes I can look at
That’s because you see seeing the recording off the RC2 Controller screen and not direct footage from the drone cameras.
I dont like the auto mode. Much better 360 where in you can choose the position.
What's with the Chinese characters in the track mode?
Early software but it’s either circle or helix.
Its lagging