SOLDERING THE V6 ON THE LITE
HTML-код
- Опубликовано: 13 июл 2024
- This video shows you how to solder the V6 kit on the Lite, but I had to blur the company logo for safety reasons.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
TIMESTAMP
00:00 START
00:06 INTRO
00:17 DISCLAIMER
00:26 PREREQUISITE
00:43 CHECKING THE CONSOLE
01:05 DISASSEMBLING THE CONSOLE
03:06 REMOVING THE CPU COVER
04:07 INSTALLING THE LITE FPC KIT
05:14 INSTALLING THE CPU FPC KIT
06:06 MANAGING THE CPU COVER
06:39 MANAGING THE HEAT SINK
07:04 MANAGING THE METAL SHIELD
08:05 REINSTALLING THE CPU COVER
08:27 APPLYING A DOUBLE SIDED TAPE TO THE MOD KIT
08:39 PLACING THE MOD KIT
09:06 TESTING AND TRAINING THE MOD KIT
09:42 RE-ASSEMBLE THE CONSOLE
11:41 USING THE HATS PACK
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
PREREQUISITE
- iFixit Y00 screwdriver
- iFixit PH00 screwdriver
- Spudger
- Plastic opener tool
- Paper towel/Wipes Cleaning Cloth
- Relife RL1000 PCB Cleaner / Isopropyl Alcohol 99%
- Kester 275 Lead Free solder 0.4MM (.015")
- Amtech NC-559-V3-TF Flux
- Tweezers
- Straight Pins
- Bent Nose Plier
- Electrician Scissors
- GD2 Thermal paste
- Hakko FX-951 Solder Station with T12-BC1 & T12-JL02 Tip
- UL10064 AWG36 Wire
- Kapton tape (5cm)
- 3M 9448A 10mm width, 0.15mm thick
- V6 Chip with a special FPCB kit for the Lite
- Eakins Autofocus Microscope 180x magnification 0.5X Barlow lens
- Sunshine SS-022B Double Head Brush
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
MUSIC
elements.envato.com/hip-hop-l...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
CONTACT & DONATION
linktr.ee/sthetixofficial
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Игры
My man, the gift that keeps on giving!
You’re an artist! Amazing skills.
Thank you! Cheers!
amazing video! gonna download this incase it gets taken down again! keep up the good work!
Much appreciated!
T12-BC1 tip is what I used as well. It’s really good!!!
well done :)
🔝
Looks like the ninjas were at it again! Great video otherwise, here giving it its view from the previous one!
Thanks for the visit
The mod kit and fpc kits are nowhere to be found 😢. Any recommendations or if they will be in stock again?
Hi! Thanks for the content. I was on your store an wondering if you would be able to do the Dialga and Palkia edition?
It is out of stock BUT you can do the same mod for the Dialga Palkia
Yoooooooo 🕺🕺🕺🕺🕺
I got a v6 pico chip that looks like this v6 instinct chip (cable goes over the ram, under the cpu shield and bends over to install). Should work the same right? Flash chip, solder components, install chip, cut shield, reassemble, install sd card with cfw?
Thanks for the videos and work you do they have been very helpful so far.
yes they are the same
🎉
Mr Sthetix, I installed a modchip following this tutorial and everything worked until the last step.. I extract the HATS pack into microSD card but when I put it back in the switch, it either fails to boot (modchip glows purple then green then shuts off with nothing displaying) or displays a message saying failed to boot init.
Do you know anything about this? I tried formatting my microSD, I did this via Macbook, idk if that's an issue, any help would be appreciated.
try using other sd card brands.
Hello sthetix
I would like to install this mod kit on my lite, however I have absolutely no experience in soldering as a whole, let alone micro-soldering. Before I start doing anything to consoles I would first like to practice and learn soldering and micro-soldering, is there anything in particular that you recommend for this type of thing?
Many thanks.
You'll need to practice soldering for small repairs before installing the modchip. For example, repair the Xbox or the PS3 analog stick. You will be confident later.
@@sthetixofficialI'll be sure to give those a try, thanks for the suggestion!
My Switch Lite shows the Instinct NX screen but it is unable to go through the OFW. Whenever I try I always get a blue screen. I also get a black screen while I try to boot the console with the sdcard inside.
Try to repair the nand withthe level1 guide.
I have no power to chip and system after installing the ribbon cables. Any idea as to what could be happening? It boots up normally if the chip is disconnected.
maybe the ribbon cables is damaged? please check the soldering points for short.
Where can I get the kit ? I tried looking for it but all I can find is the v1,v2 and v3
you can dm me on X or twitter
Hi, I accidentally updated my switch to the latest firmware and now when I boot my switch the screen stays black, my emunand is working fine with the latest ams and hekate but sysnand is not!
try using my latest hats pack, 1.6.2, run sysmmc, it should work.
What would you more recommend, the new v6 Instinct NX or Picofly?
v6
Is it the same process for picofly?
how come the soldering iron doesnt damage the cable? sorry for the stupid question, i am a noob when it comes to soldering
because it is heat proof.
@sthetix I completed the mod and it boot fine into OFW and Hekate. However, when I tried to back up EMMC the unit would froze and locked up. Any pointer on what to do next? thank you.
try to replace the sdcard
@@sthetixofficial I got it fixed. I found one loose connection on the flex cable connector and maybe the cut off part on the heat shield is touching the usb port that might cause a short. Everything were corrected and now working like it should.
is the process for the v6s on switch lite similar to this?
yes it is the same.
Can follow the same instructions for consoles v1 patched abd v2 ?
the concept is still the same.
Why hide the battery info? And the switch logo?
What about the sp caps anchor gnd points 😮
we dont need it, as it is included on the sp caps.
Too ez
Can you make a tutorial of modding new nintendo 3ds systems?
it is there in my channel
Thank you sir
Hi, i need Contact to you, i have some problem with my nintendo switch lite after updating the instint v6 mod
Yes?
Did you miss a logo in the original upload?
the logo is exposed in the original upload.
I can't find any V6 any source/links?
it is on ali.
Your discord invite link doesn’t work anymore on your about page
you can contact me directly.
My switch never boots to hekate anymore after updating to 17! It only blinks Purple for a bit Then WHITE! Then straight to OFW Heelp! 😢😢😢
there is something wrong with the installation.
oh. okay. that happened to me before .. i just waited then its fixed again. Then this happend again. 😭
Beli chip nya di mana ya bang?
Di aliexpress atau di tempat laen.
An easier way doesn’t exist?
it is the easiest way
It does but you need a first gen switch to do it
Hello after soldering I got blinking pattern 🔵…🟡🟡…🟡🟡…🟡🟡 what could be the issue pls