Thanks for the great vid. It helped me and saved alot of money. My one spindle was really seized, and after soaking in oil and using heat it worked a charm. Be careful not to knock the spindle too hard with a hammer as it messed up my threads, but i managed to file it down and get the bolt on. Hope this helps anyone in same position.
If you install everything after removal - don't put the wipers on. First test run it and make sure it is in the rest position. Then you can install and align the wipers. Be sure that the wipers are clean and you have water on the glass to not run it dry.
Thanks for the great vid. It helped me and saved alot of money. My one spindle was really seized, and after soaking in oil and using heat it worked a charm. Be careful not to knock the spindle too hard with a hammer as it messed up my threads, but i managed to file it down and get the bolt on. Hope this helps anyone in same position.
Thanks, what causes the droning noise as they get older, is it the mechanism or the motor?
Thanks.
yes.
Hello, did you also lube the center pivot point or only side like in the video?
hi! better to lube evething! :)
@@RMFUNTIK I have all the tools except a vice do you think it's possible without the vice?
@@aden3113 yes if it's not rusted
Hello please what is that half washer you used called for the centre of the transmission arm
it's not the half washer, it's from bottom, it's just stuck there in the middle... it has 2 washers on the bottom and on the top.
@@RMFUNTIK i found out its called a circlip-the one that looks like a C
@@robaichjones1691 oh you mean that top one C clip? it's was originally there!
Can u plz tell us how to Align perfecct bcz my wipers make noise and not cleaning very vell glass idk why
Align?
That sounds like the wipers themselves need to be replaced, not an alignment issue.
If you install everything after removal - don't put the wipers on. First test run it and make sure it is in the rest position. Then you can install and align the wipers. Be sure that the wipers are clean and you have water on the glass to not run it dry.
@@frecatorDementa i changed but still noise skipping at glas so need of course Align
Hi, was it necessary to remove the ecu.
yes
👍👍
Yeah mine didnt come off even with me hitting it multiple times with a hammer, ended up breaking the metal, Oh well
Next time try to heat up..
@@RMFUNTIK yeah I thought about that. Thanks anyway
@@thehandyguy please and thank you