There is a similar mod for the stryfe, one problem is if you put powerful AA batteries, the gun will shut down. You will have to twist the voltage restrictor so the wires connect to bypass the voltage restrictor. I might upload a vid tutorial for it
Do not do this, do not mix battery types and definitely do not put 9 volts through your regular 1.5 volt AA cell. 9 volts just won’t last long in a high drain device and mixing a 9 volt and a AA battery can be dangerous.
Please don't do this. The AA can't handle the 7.5v difference of current. It will rupture and leak. Found out the hard way. Just cause it's cheap and easy doesn't make it safe or correct.
The problem with this mod is that the motors in the barricade are built for 3 1.5 volt batteries. too much more power will burn out the motors, and youll have to get new motors, or replace the blaster
Jack Harris there is a small orangish colored loop inside of the blaster, twist it 180 degrees to stop it from working and then it will allow the high voltage battery to work in the blaster
There is a similar mod for the stryfe, one problem is if you put powerful AA batteries, the gun will shut down. You will have to twist the voltage restrictor so the wires connect to bypass the voltage restrictor. I might upload a vid tutorial for it
Do not do this, do not mix battery types and definitely do not put 9 volts through your regular 1.5 volt AA cell. 9 volts just won’t last long in a high drain device and mixing a 9 volt and a AA battery can be dangerous.
What if I just put the 9v in the barricade and not both
Please don't do this. The AA can't handle the 7.5v difference of current. It will rupture and leak. Found out the hard way. Just cause it's cheap and easy doesn't make it safe or correct.
The problem with this mod is that the motors in the barricade are built for 3 1.5 volt batteries. too much more power will burn out the motors, and youll have to get new motors, or replace the blaster
Cartersaviking 04 No, barricade motors are actually 3s motors and can take up to about 11.1v
The barricade was made before Nerf realized they could skimp out on motors
nice but idk what is up with the box cutter
Epic best one thanks
perfect! thanks.
👍👍👍👍👌👌👌
modeling plastic cutter required
How did u cut the plastic pieces out
will this work with the stryfe?
Yes it will just put one 9 volt battery and 2 dummy batteries
will it work with the stockade pls reply today I would to do the mod today thanks.
outdoor Tom outdoor Tom LMAO.... still waiting to open your blaster?
No don’t even use 9v batteries to power flywheels, 9v batteries just can’t provide enough current and will not last very long in flywheel blasters.
Should've got imrs instead
Cool but will it blow the system or overload
No, barricade motors are really good,I know I'm 7 years late
@@elcoshayuyodrsimi3000 can I still replace the flywheels 😂
no an ather guy make it with more voltage
Mine is not shooting
Jack Harris there is a small orangish colored loop inside of the blaster, twist it 180 degrees to stop it from working and then it will allow the high voltage battery to work in the blaster
@wesome
Be more specific
Yeah i agree
SUBSCRIEEB
This is awesome and it works