I’ve loved corvettes since I was a kid (thanks to Dad being a corvette tec) but You guys re ignited my love of corvettes from watching your videos and I finally bought my first one (c6 ls2 z51) the day before thanksgiving 🎉 can’t wait till spring when I can break her out for the spring/summer season, keep doing what you guys do!!!
"Comment Something, write the alphabet, just something"...... lmao, love the fact that you guys were able to bring a beautiful Z back to life and still have a great sense of humor afterwards.
Fran, in the video you mention an aftermarket short block with your head/cam package could have up to one point less compression than a stock block. With the Texas Speed short block that was installed, could the deck be milled a few thousandths to gain the compression point back if the customer does not plan to modify any further or would this be an issue? if milling the deck is not the answer, what could be done to address the loss of compression with a Texas Speed aftermarket short block that would not be catastrophic?
U said comment, so here we go…..love the page!! I watch you guys to learn. Question: I have a C6 G 29:19 rand Sport , manual. I had engine drama so it’s now a 416” stroker with BTR stage 2 cam and Texas Speed ported heads. Everything else is factory. What mods would YOU do?
There heads cam package throttle body intake fuel system meth flex fuel sensor clutch injectors A&A kit a p3 gauge tune and a good tire make 950 maybe 1000
I love how your mechanic just drops the drivetrain. Simplify the whole process you suck how’s that? lol I love your videos because they’re real cars real life no games no lies no drama. Plain and simple.
Mf sounds nasty! Great work on the build. What are yall looking for in the tables when it struggles to hot start? My cammed LS3 is hit or miss on startup when its hot
Once i went heads and cam, I had hot start issue. You can wrap the starter in a heat blanket. I had changed a part and the hot start issue went away completely. Camshaft position sensor
Just wondering, I live in Vermont if I purchased a c6 z06 Down your way could I have it shipped to your shop to have work done on it Heads, cam and headers then have you ship to me in Vermont.
@@joem1382 So you mean it takes 100 MORE wheel hp to beat it (your wording is very confusing). It'll take a lot more than that to beat it. We're talking about cars weighing 800 - 1000 more lbs than the C6Z, so 100 more hp is not going to do it.
Fran you suck.. My car runs too good from the cam and your tune. It makes too much power and has no traction even with Mickeys on it. I'm sooo disappointed 😂
"Please comment" / "I don't what you comment" / "Put a letter". Fran, you're hilarious. Always love your content.
You guys do great work. It was amazing how much carnage this car had
Happy Holidays to the RPM fam. Much love and respect all the way from Los Angeles.
I’ve loved corvettes since I was a kid (thanks to Dad being a corvette tec) but You guys re ignited my love of corvettes from watching your videos and I finally bought my first one (c6 ls2 z51) the day before thanksgiving 🎉 can’t wait till spring when I can break her out for the spring/summer season, keep doing what you guys do!!!
I JUST BOUGHT A ZR1!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Congrats!
Dang. Glad yall got them back on the road. Exactly why I got a set of heads off you guys and did my ones. Thing runs like a proper champ afterwards.
"Comment Something, write the alphabet, just something"...... lmao, love the fact that you guys were able to bring a beautiful Z back to life and still have a great sense of humor afterwards.
Fran, in the video you mention an aftermarket short block with your head/cam package could have up to one point less compression than a stock block. With the Texas Speed short block that was installed, could the deck be milled a few thousandths to gain the compression point back if the customer does not plan to modify any further or would this be an issue? if milling the deck is not the answer, what could be done to address the loss of compression with a Texas Speed aftermarket short block that would not be catastrophic?
Nice build. Every time I take my Z06 out I worry about this happening too. Damn I need to call you guys. Wish you were closer. I'm in North Carolina.
C6z is one of the best N/A platforms ever built, especially at its current price point. Under 50k for a million smiles.
U said comment, so here we go…..love the page!! I watch you guys to learn.
Question: I have a C6 G 29:19 rand Sport , manual. I had engine drama so it’s now a 416” stroker with BTR stage 2 cam and Texas Speed ported heads. Everything else is factory. What mods would YOU do?
There heads cam package throttle body intake fuel system meth flex fuel sensor clutch injectors A&A kit a p3 gauge tune and a good tire make 950 maybe 1000
And 2 inch headers
Great video guys!
Do you guys order the TSP engine or do you prefer another company over them? Say LME or TKM for example.
LME for sure
@paisley2342 why? What's the reasoning?
@camarodreams7689 LME pumps tings out, good quality control. Tsp, not so much.
I enjoy your channel. Maybe one day I will bring you a car
Just pulled my stock heads at 105 k miles… gonna get valve guide clearance checked, I must be on borrowed time lol
I love how your mechanic just drops the drivetrain. Simplify the whole process you suck how’s that? lol I love your videos because they’re real cars real life no games no lies no drama. Plain and simple.
Beautiful car.
Matt is way more jolly when he isn't the one being filmed 😂
More Atomic Orange Z content...lol Great content as always.
I would really like to know what compression ratio that motor ended up with?
Love ya
Hate ya
Algo foood
You said that the compression was lowered by a point is that because he plans on doing more bolt on is the compression like 9 to 1 now ?
What gain do you see with using e on the ls7?
RPM💯🔥
It's December now, so how many months behind are your videos?
So is the 7.0 short block not the same as the original ls7 that came factory?
Mf sounds nasty! Great work on the build. What are yall looking for in the tables when it struggles to hot start? My cammed LS3 is hit or miss on startup when its hot
Once i went heads and cam, I had hot start issue. You can wrap the starter in a heat blanket. I had changed a part and the hot start issue went away completely. Camshaft position sensor
Just wondering, I live in Vermont if I purchased a c6 z06 Down your way could I have it shipped to your shop to have work done on it Heads, cam and headers then have you ship to me in Vermont.
If sumone can tell me what is the difference really between the short block and the stock ls7 that comes in it witch would be better part for part
Did it drop a valve? I didn’t se it in the rockers when you pulled the valve covers !!
could you guys film more of the Chevy ss builds please
Why? WTF would waste money on a Chevy SS? Fugly car!
@@Evil_Clown83lots of people like Chevy SS!
@@DanielSmith-r2p Yeah, that's why I never see them.
Tune by RMP ❤
Nice car
Fran doesn't suck
Nice 👍
Just a little information to C6 Z06 owners. Once you go heads and cam, it takes over 100 wheel for a modern day weight car to beat you.
Did you mean 1000?
@Evil_Clown83 not one bit
@@joem1382 at least!!
@@joem1382 So you mean it takes 100 MORE wheel hp to beat it (your wording is very confusing). It'll take a lot more than that to beat it. We're talking about cars weighing 800 - 1000 more lbs than the C6Z, so 100 more hp is not going to do it.
@Evil_Clown83 man lol that's what my original comment says. It says over 100 wheel.
I need a cam for an LS3 from you
They are available on the website
❤❤❤❤
I want one
What’s with the Sound on this video? I had to turn my Bass to negative 6. lol.
I need a ZO6
Im In my car watching , my question is
how does this video have so much bass ?
coming from literally no where ??
Wish I went to you guys for my heads cam instead of getting scammed by Tony Mamo
???
See now you said it so it’s going to happen. Just get it on video when it does.
“Comment”……just for Fran 😁
Came here just to comment 👍🏾
C6Z06 is the best!
This comment is only because Fran asked me to comment some nonsense. 😂❤
Needs a blower lol.
Fran sucks, and I am a huge fan 💯
Fran you suck!!!! JK, yall do awesome work and keep doing what you do brother!
Fran does not like Oscar Meyer hot dogs.
You suck.
Great stock just headers Z06
I like it👍
Fran you suck.. My car runs too good from the cam and your tune. It makes too much power and has no traction even with Mickeys on it. I'm sooo disappointed 😂
Why do all the camera guys come off as being condescending douches… lol
Ready to put this thing back in or what. Ya no shat Steve Jr haha
comment lol😂
you suk abcd
You suck lol
First. Like and comment. Lol
I'm surprised that you made it before the bots 😂
Fran, YOU SUCK! 😂😂 jk
A,b,c,d,e,f,g,h,I,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z
Fran sucks
Per frans request 👍