yeah the trolls are heavy...Fran is awesome. Take or leave it attitude! We are about the same age and of that generation. The younger generation of wokies can go woke themselves over porn since they don't know how to get real women...unless its the men that dress like women...then they are good.
I always enjoy the ride alongs with Fran. He’s got so much useful reliable and relatable knowledge definitely need to get that car back in with a tire on it and send it
We did a 4 degrees "Garrett" on one of my 5.0L SBF engines, took an incredible amount of RPM just to get the car moving. We took the "Garrett" out to 0 degrees and it was fine.
17:15 This is the view we should always have for every dyno pull. We want to see flames lol We don't care about the front of the vehicle lol (speaking for everyone)
Seems like all the LT4 builds I see go with a 416. Is there a reason people aren't chosing the 427 instead? Curious as I would rather go with the 427 than the 416, unless there's a valid reason for it.
I know you are going to pass this by. My Step dad just died. He raised me to work hard at seven years old. You can look it up Gary E Morgan has a brick in his name in Bowling Green KY. He and my mom have owned, i lost count of the corvettes they have owed! My Step dad's first one was a 79 L82 four speed. He gave it to his son and blew it up in Utah. So, now after his passing. My mother has a two c8s, a yellow convertible. Which she is selling. She also has a 70th edition in white c8 that she gave to my step brother. My favorite Corvette was his c7 z06 convertible!!!!! So, I am looking into buying a c7 Z06 in red auto because I am retiring soon. Can you do a a stage five on a automatic running on just e85 or 93 octane? I definitely want the ported blower and everything else but the meth tank. Thank you
Do you guys think once a more affordable port option comes out like the dsx you will kind vear away from meth? Or do you feel when meth is done correct that it's just as good as port? The Aem controller seems alot nicer then alky that's for sure!
Cool we went for a ride. You need some good content though. Maybe follow up and have them send back footage. Start doing this. I left the ch but like the way it turned. Better vibes. I dig it. FWIW
may be a dumb question but hopefully the car community doesn’t roast me with this one, but what does he mean by ‘e85 is at 40%’? does that mean he’s bleeding e85 with regular fuel and it’s 40% of e85 or how does that work?
I sent mine with the tire. I believe I heard Fran saying he doesn’t like using the good tire on the dyno. Wait about 6 months for the vid to come out. See if the tire helps the dyno runs. It should.
Man add some port injection to these builds and let it eat. All the money these guys spending on these builds and they don’t have another $4000 for Port setup
@@ICUall666wtf? Dont watch if you are just gonna whine. Better yet, put something on your 7 year old channel that has 0 video representation of your "filming skills". You last comment here was that the video looked like the Blair Witch Project. Sad.
I think that’s the limit of the block. Any larger on the bore and the cylinder walls will be too thin. Any longer on the stroke and you’ll be pulling the piston out of the bottom of the block.
![[SFM] Risky Recital](http://i.ytimg.com/vi/RzNkY1_Nk3o/mqdefault.jpg)
i like when fran comes out to talk to everyone as theyre building it.
yeah the trolls are heavy...Fran is awesome. Take or leave it attitude! We are about the same age and of that generation. The younger generation of wokies can go woke themselves over porn since they don't know how to get real women...unless its the men that dress like women...then they are good.
And don’t forget Bill too!!!
And he doesn’t get in their way. Points things out if he is asked. Fran has matured! Congrats buddy.
Congrats on 150K Subs!! Well deserved!
I always enjoy the ride alongs with Fran. He’s got so much useful reliable and relatable knowledge definitely need to get that car back in with a tire on it and send it
We did a 4 degrees "Garrett" on one of my 5.0L SBF engines, took an incredible amount of RPM just to get the car moving. We took the "Garrett" out to 0 degrees and it was fine.
Big build! Love it! Great work!
That is a cool build and ride.
Thank you
😎😎😎👍👍👍
Sweet ride!
The 🇺🇸 corn hole boards are great
Well Done!
Midwest Magic Cleaning guy, Mac, suggested your channel. He said he’s planning to get his Camaro worked on by your company.
My Z is begging for one of your packages. Keep up the killer content!
I ordered Stage 4 package in my C7 Z06. Best move I ever made. Fast and dependable. Would not hesitate to drive coast to coast.
Are you stock?
Stage 5 at the shop!!
17:15 This is the view we should always have for every dyno pull. We want to see flames lol We don't care about the front of the vehicle lol
(speaking for everyone)
Seconding for everyone haha
Seems like all the LT4 builds I see go with a 416. Is there a reason people aren't chosing the 427 instead? Curious as I would rather go with the 427 than the 416, unless there's a valid reason for it.
Money, can’t take a stock block to 4.125 bore I believe.
8000 vs 15000. These are not the customer block bored out. New block from Texas Speed.
Would need to sleeve or go with one of those 6.6 iron blocks
Let’s go.
How hard is it to go lt4 in a c6z?
I know you are going to pass this by. My Step dad just died. He raised me to work hard at seven years old. You can look it up Gary E Morgan has a brick in his name in Bowling Green KY. He and my mom have owned, i lost count of the corvettes they have owed! My Step dad's first one was a 79 L82 four speed. He gave it to his son and blew it up in Utah. So, now after his passing. My mother has a two c8s, a yellow convertible. Which she is selling. She also has a 70th edition in white c8 that she gave to my step brother. My favorite Corvette was his c7 z06 convertible!!!!! So, I am looking into buying a c7 Z06 in red auto because I am retiring soon. Can you do a a stage five on a automatic running on just e85 or 93 octane? I definitely want the ported blower and everything else but the meth tank. Thank you
I think it would be cool if you added customer reactions or even a ride along with them.
Do you guys think once a more affordable port option comes out like the dsx you will kind vear away from meth? Or do you feel when meth is done correct that it's just as good as port? The Aem controller seems alot nicer then alky that's for sure!
Cool we went for a ride. You need some good content though. Maybe follow up and have them send back footage. Start doing this.
I left the ch but like the way it turned. Better vibes. I dig it. FWIW
Edit: good* as in I want to see how it performs on the street or track. My 2c. If I didn’t like it I would t care to say 👊🏻
I’ll take some video and sent it to them. Maybe they can do a short from it.
C7 Grand Sport with Z07 package, then add a supercharger or C7 Z06?
You Know What Would Help??? A FN HUB DYNO 🤣🤣🤣
Exactly what I was thinking. Of course it's easy to suggest that when I'm not the one footing the bill.
Just curious, why dont you guys wire the wide band into the P3 gauge?
We do
@ oh ok i must of misunderstood then, i thought they were kept separate. Thanks!
may be a dumb question but hopefully the car community doesn’t roast me with this one, but what does he mean by ‘e85 is at 40%’? does that mean he’s bleeding e85 with regular fuel and it’s 40% of e85 or how does that work?
Yes blending e85 with 93 octane gas to get the ethanol to a % the fuel system and injectors can handle. These setups cannot handle 85% ethanol.
427 5th gen Camaro, 2650 or F1A-94?
Both. And a 250 shot. Stage 9, "rod delete" package.
Rod and oil pan delete
What do you guys do with the engines and/or blowers you swap with aftermarket? I’ll buy that for $1!!!
pulley combo?
Never go full Garrett
Said while wearing Viet Nam era camo while wearing blackface 😂
So being a garrett means you rode the short bus is what im getting lol
Wonder why the customer doesn't send the car with the tire???????????/
That’s simple, 98% of vettes are garage queens. Even ones built like this usually end up as a conversation piece at cars and coffee.
@@srtologyand then they sell it to get a fbo or stock one 😂😂
I sent mine with the tire. I believe I heard Fran saying he doesn’t like using the good tire on the dyno. Wait about 6 months for the vid to come out. See if the tire helps the dyno runs. It should.
All cars are different.
Stage 6 ..... yeah buddy
Stock Michelins eat a bag of shit. ZP tires are useless almost everywhere.
Man add some port injection to these builds and let it eat. All the money these guys spending on these builds and they don’t have another $4000 for Port setup
The bots are thick in the comments today.
It’s so annoying. I legit report and block them everytime.
@@ICUall666wtf? Dont watch if you are just gonna whine. Better yet, put something on your 7 year old channel that has 0 video representation of your "filming skills". You last comment here was that the video looked like the Blair Witch Project. Sad.
I wish they made the c6zr1 with the c7 interior
why doesn't anyone do a bigger motor then a 427
Overkill and really unnecessary these days.
I think that’s the limit of the block. Any larger on the bore and the cylinder walls will be too thin. Any longer on the stroke and you’ll be pulling the piston out of the bottom of the block.
Just dropped off my dads car hope it ends up in a video (merczl1s)